Is it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
Looking for Lisp command to show (read/assign variables) to normal or custom properties in an object?
View 7 Replies View RelatedWe have this problem with nothing showing up in the properties tab when we select a line/object.
We have tried everything from here:
[URL]
But still can't get it work.
Is this more of a Windows issue rather than AutoCAD? We are running Windows 7/64.
When objects are selected, they don't show up on the properties panel (or on the Quick Select panel either) It doesn't matter what method I use:
-Pick one object (lines, arcs, circles, blocks, etc), the Quick Properties flyout appears, but empty. Properties flyout show "no selection"
-Window-select object or objects. Quick Properties bar shows up empty again. Properties flyout show "no selection"
-Click on the Quick Select icon. It prompts me to pick geometry. I do. The Quick Select window comes up, but where it says "Object Type", it only has the option "Multiple", and not the normal list of the geometry you selected.
Have Autocad 2011, as well as Autocad 2010 and Inventor 2010 (trial license) on the same machine.
Intel Core2 Quad Q8200 2.34 GHz
8 GB RAM
Windows 7 Pro 64 bit
In CorelDRAW 12 I created a design with a few bevel effects on simple polygons. I now have CorelDRAW X5 and need to make some minor adjustments to these bevels.
But I can't seem to bring upp the bevel properties anyway and of course canät edit them either.
How can I at least SEE what properties/params were used for those bevels?
It's OK if I can't edit them (even if that would be preferable). As long as I can get to see the properties that were used, I can remove the old ones and create new ones with the same properties (with the required adjustments).
I note that in the object manager, the old bevels appear as "Bevel group" (but in Swedish), while new bevels appear as "Bevel", and the little icon in the object tree is different. The old ones have an icon that would seem better suited for an extrude.
When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedOccassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
View 6 Replies View RelatedI am using (trying to anyway) a :VLR-xrefSubcommandReloadItem reactor. My only question is how to get the xref/block name from the 'reactor callback data' Object ID.
I am ultimately trying to pass it to (vla-get-xrefdatabase ....), but I cannot figure out how to turn the second parameter from the reactor callback data into something I can use - for example the second parameter returned may be "65" or some other number.
Civil 3D 2011
Windows 7 x64
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
I am just wondering whether FIELD category can access the OBJECT DATA Table ?
I want to use a block to display its OD table's attributes as Annotation text , so that the Text will update when the OD table change.
Or do I need use the Data connection for this purpose ?
I very frequently get the above message, "Oject was open for Read". Its to do with annotative text objects which I just recently started using. When I get the message the piece of text I am trying to make changes to is frozen, cant delet it or anything?
View 9 Replies View RelatedI get inconsistent results when I try to use the object snap to a point such as an intersection in an xref. Sometimes it works and sometimes it does not. Even the "nearest" doesn't seem to recognize the xref consistently. Is there a way to insure that the point is recognized?
View 9 Replies View RelatedI have a xref with sample locations that I am working with and importing into multiple different files. My problem: I will make changes in the xref and then go to the drawing where the xref is attached. After reloading the xref, i see that in model space the changes are fine. These changes are just moving the location of an object. But when I go to paper space, it still shows the object where it initially was before I ever made a change.
View 4 Replies View RelatedHow to get the Object Properties by Javascript
I found that it is hard for me to get the property of selected object by Javascript.
Just like the following code, I can get the object ID of each selected entity. But when I want to get the property of the DBEntity, just the center of a Circle entity, or the Position.X of a Point, I dont know how to Continue. The getExtent is the only function that I can writeout the property, it is List in the develop guide.
function setPromptSelectionOptions(options) {
options.messageForAdding = "
Please select some entities"
[Code]...
Juts had Acad LT 2009 re-installed on my new laptop, and all of my old settings, desktop preference etc have been wiped. No problem, couple of hours to set it back up.
BUT
When right-clicking on any object to bring up the properties, (line length, text height etc) the properties do not appear in the drop down box on the right, or in any 'quick properties' display
I created a dynamic block with text field that show the lenght of a line, but this line can be 0 and in that case I want that the text field will show nothing instead of "0".
I try to write it in diesel expression with if command but i don't know how to bring the object lenght into the diesel expression code.
I work with bridges and get xrefs from our road designers containing hundreds of layers. I'd like to point at an object in these xrefs and get the layer name. Is there a simple way to do this? The way the LAYFRZ-command works, freezing a single layer, I figure ACAD should be able to just return the layer name instead. Does this functionality exist?
View 2 Replies View RelatedI saw that I can add Fields or store data in dictionaty, but those data are not showed in Properties Windows.
In not Acad-application (but .net application) I can create property description and add "virtual" properties with the use of designer. In Aced it doesn't work.
Is it possible to add custom properties from .NET?
i want to zoom object by its properties, such as i want to zoom the object was using 0.13mm lineweights or zoom the text which was using 3mm testheight
View 3 Replies View RelatedMy Acad experience is very old-school, and I have been away from true Autocad for a number of years.
I have been attempting to edit the properties of objects in the block editor and ran into a problem.
+ I select an object.
+ Right-click and choose Properties.
+ A list of properties is displayed, but they are not for the object I am trying to edit.
I did a test by selecting the object and using the command prompt, used the CHPROP command to change the objects color. It did change color as expected.
However, when I used the right-click/properties method, the properties shown do not show the new color. So, I suspect that my right-click/properties method is not showing me the object's properties. But, rather the default properties when any new objects are created.
So, obviously right-clicking is not the way to get there. What am I missing?
Is there a way to access AEC object (AEC_WALL etc.) properties from RealDWG? I am able to get the class name AecDbWall. And even the extents of the entity.There are some Aec*.dll files in the RealDWG folder but I am not sure what to use to get the properties of Wall,window.I'm using visual C++. I have installed the object enablers of Architecture Structure Drawing, MEP, and also of Civil.
View 1 Replies View RelatedI am working on a template for a project type (Residential). I have created all of my drawings, views, sheets, etc. I have a View drawing set up for a site plan - where I include some m-text regarding the survey and site plan information. I want to create fields that reference the Surveyor's Name, the Survey Date and the Project Address.
I tried creating custom properties in the project, but it appears that fields that reference the project properties only update on the sheet views in paper space. Is there a way of creating drawing specific fields in model space where I can input some data and them extract it in a field in model space that is quick and easy (as opposed to creating some type of MVB)?
How to get the properties of plant 3d ortho block?
AutoCAD Plant 3d 2014
I cannot change the color of any object in any drawing file from the properties manager or color command. I can change the color through the layer manager by assigning a new color to that layer, but cannot override the ByLayer and ByBlock settings with the object properties. The color drop down is simply grayed out. I am using Autocad lt 2006.
View 7 Replies View RelatedI have a BLOCK, contains object & Blocks, that Blocks also contains objects and blocks and so on..
ex.
BLOCK
|
|—Objects
|—Block|
When selecting an AEC and going to the properties dialogue box I no longer have items showing up in the prpoerties like cleanup group, size, or endpoint type. It only has the general tab and 3d visualization. I did a repair from the uninstall software fromn control panel. I also rebooted. I don't want to do a reinstall becuase of customizations. I have vista Ultimate operating system.
View 2 Replies View RelatedWhen I pick the properties command sometimes the box comes up blank and the "Esc" key has to be pressed to bring up the box. When the box does come up the properties of a picked object does show and you cannot change the properties of the picked object. I am runnung AutoCadLT 2014.
View 7 Replies View RelatedSomehow the Properties Palette has gotten less wide- such that I can't read teh actual properties. Previously I was able to make it wider just by hovering over it, clicking on an arrow and dragging it wider. Not now.
View 1 Replies View Relatedit sure is useful to be able to get to the rest of the object properties that are there but hidden from property sets.
May 18, 2007
ADT Window Style Type in a PSD
Filed under: visitmycarfeed, drivemy cars, minicartag, internet — wilhemina947judith @ 5:38 pm
The Window Type for a windows style is not available as an automatic property. So a bit of VBScript is needed. Create a PSD (Property Set Definition) that applies to Windows styles and add the automatic property Handle. Then add the formula below. Notice that [Handle] in the formula must be selected from the “Insert Property Definitions” list. In the code
AecX.AecArchBaseApplication.5.0 refers to ADT 2007. For other versions of ADT change it. ADT 2004 - AecX.AecArchBaseApplication.4
ADT 2005 - AecX.AecArchBaseApplication.4.5
ADT 2006 - AecX.AecArchBaseApplication.4.7
ADT 2007
- AecX.AecArchBaseApplication.5.0
ACA 2008 - AecX.AecArchBaseApplication.5.5
[code]....
I have already wrote the code to get the elevations of ceilng grid objects, diffusers and lights in autocad MEP 2008. Now to get this to work for basic hatch objects that we like to use for gyp ceilings...
How can I restore my object properties dialog box in its default state? I'm recently working on a project when my Autocad Architecture 2013 just stopped working while it was saving. When i re-opened the file, I just noticed that the object properties doesn't show the full parameters of a certain object anymore. The width,height and other parameters in adding a wall is not included in the properties dialog box. Same scenario goes for all the objects, when i click on a dimension line or any line, an incomplete dialog box appears. Solutions that i've tried but nothing worked:
1. Changed User Profle Preferences
2. Changed my .CUIX in the customization file
3. Restart Autocad
4. Reset Autocad
5. Reinstalled Autocad
6. Downloaded and Installed Autocad Architecture 2013 service packs 1&2
I'm Using Autocad Architecture 2013 64 bit and OS windows 8 64 bit.
I am having an issues that I am unable to change the properties of a selected object using the tools located within the ribbon. Instead I need to go through the properties popout to change them.
for instance, I seclect a line and want to change the layer from A-wall to A-door. I try to change it using the drop down layers located within the ribbon, but it does not change. however If I do the same only though the properties popout window I can change it.
Is there toggle that I accedently switched?