My Acad experience is very old-school, and I have been away from true Autocad for a number of years.
I have been attempting to edit the properties of objects in the block editor and ran into a problem.
+ I select an object.
+ Right-click and choose Properties.
+ A list of properties is displayed, but they are not for the object I am trying to edit.
I did a test by selecting the object and using the command prompt, used the CHPROP command to change the objects color. It did change color as expected.
However, when I used the right-click/properties method, the properties shown do not show the new color. So, I suspect that my right-click/properties method is not showing me the object's properties. But, rather the default properties when any new objects are created.
So, obviously right-clicking is not the way to get there. What am I missing?
as the subject states, at some point (I believe after uninstalling autodesk 360), our properties tool pallete will not populate info for the selected object. is there a fix other than re-installing from scratch? The installation fixer didn't work, and I've had to re-install twice now for other issues with the software, so it's getting very costly/time consuming to just re-install for these problems.
In CorelDRAW 12 I created a design with a few bevel effects on simple polygons. I now have CorelDRAW X5 and need to make some minor adjustments to these bevels.
But I can't seem to bring upp the bevel properties anyway and of course canät edit them either.
How can I at least SEE what properties/params were used for those bevels?
It's OK if I can't edit them (even if that would be preferable). As long as I can get to see the properties that were used, I can remove the old ones and create new ones with the same properties (with the required adjustments).
I note that in the object manager, the old bevels appear as "Bevel group" (but in Swedish), while new bevels appear as "Bevel", and the little icon in the object tree is different. The old ones have an icon that would seem better suited for an extrude.
I've tried to import a dwg file that was created by someone else but I'm having a hard time editing it. I can scale it and move it and things like that, but if i wish to change the height. I tried scaling it, but it messes up the object. The object I am trying to shorten is a measuring rack on this site [URL].......
I can't change the objects height. Perhaps it's because it's a block reference or something. I've tried editing the block itself, but i have no luck in trying to edit the height. I cant splice it either.
I've attached the file im trying to change the height of.
I recently upgraded from LT2013 to LT2014. I never had any issues with 2013, but now seem to be battling with 2014. My OS is Windows 7 Home edition.
When selecting an object and then clicking the properties menu, the properties of the selected object are not displayed, but instead the properties of the selected layer are shown.
In the attached screenshot:
1) My active layer is "AM_VIEWS".
2) The layer of the object that is selected is "MEDIUM".
3) The properties dialog box shows the properties of my active layer and not the selected object.
I am therefore unable to override any settings of the selected object and manually change settings e.g. Linetype, Linetype scale etc.
Is it possible to edit the properties of a dwg file that isn't open in AutoCAD via VB/VBA/VL? I want to add summary information to the comments text box without opening the files.
Occassionally the object properties in my object manager will dissappear and I am unable to bring them back. I have tried toggling all the buttons on the manager, restarting corel, resetting corel to it's default settings and restarting my computer but nothing will bring back the properties. It does not happen on every single file but it happens often enough to be a pain. I have attached a picture of what the object manager looks like.
In my idw, when I right-click on my section view line (or the section view itself), I want to change the section depth from full to some distance. Problem is there is not a "Edit Section Properties" in the context menu.
There are other section views on this sheet and they will display "Edit Section Properties" in the context menu.
Any clues as to why I dont get a context menu on just this one section view? I could delete the view and redimension everything, but I had rather not.... Its got several dims on it.
Cant post the file either... its pretty large.?The idw itself is 16mb, not counting all the parts/assemblies.
How would I go about editing drawing properties (Title, Author & custom props) without using AutoCAD. I need to replicate within VB.NET the windows explorer RMB > Properties capability.
I have heard mention of DWGProps.dll but cannot find it anywhere.
Is there any way to edit multiple attribute properties, NOT using battman? While battman will chnage every att-block within the drawing, I'm looking for a way to change the text size of one specific line of text within an attribute, and ONLY change it in a certain few within the drawing. It'd be nice if I can select those specific blocks and change the properties in the properties manager, but it's not an option.
I am setting up a parts list using The Metric Catologue. In the Pipe Properties the Pipe Diameter shows mm but the Minimum Curve Radius shows inches. The Units are Greyed-Out. Is there a way to edit these Units?
I have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012 Win 7 Ultimate x64 Intel Core 2 3.2Ghz - 12MB RAM Nvidia 8500GT Dual DVI
I am facing problem with editing content center library. Find attached file for more details. soft ware is asking for read / write library. I have 2011 version there is only read only option.
I have tried to edit the Properies of Parcel in Information and Description by using the following 2 methods:
Method #1: I started with Settings in Toolspace => work on Parcel Style and Label Style for setting up the desired data I want to input. Then I went to Prospector in Toolspace => Sites => Site 1 => Parcels => Property : 1 for editing the desired data.
Method #2: On the drawing area, I selected the created Parcel object by clicking on the Property : 1 to get the Properties tab. Then I edited the Information - Style, Parcel Area Label Style, Name. I went to Prospector => Sites => Site 1 => Parcels => Property : 1 => Information - Descrition for adding the desired data.
My questions:
Q1. Did Method #2 change any thing in the Settings in Toolspace?
Q2. What is advantage in each Method?
Q3. In the Settings for Method #1, I saw the following items:
Parcel
User-Pefined Property Classifications
Parcel Styles
Label Styles
Table Styles
Commands
What are User-Defined Property Classifications, Table Styles, and Commends for?
Working in AutoCAD 2013LT-my Layer Properties Manager has stopped allowing me access. When I open a drawing layers all come however I get a pop-up note that says: "ALL LAYERS ARE ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
What happened-even when I try to edit layers they will not show up in the Properties Manager as changed.
When editing the properties for the title block on each sheet of my drawing, I've become rather annoyed with the default column width of the Value column. It always opens to the same width no matter how many times I change it. Every time I edit something in the title block, I have to resize this column to see everything I'm editing.
Any way to change the default width it opens at?
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014 Dell Precision T1650 Windows 7 Professional SP1 64-bit Intel E3-1270 V2 3.5GHz / 32G RAM Nvidia Quadro 2000, Driver 331.82 Space Navigator, Driver Version 6.17.7
I'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
I found that it is hard for me to get the property of selected object by Javascript.
Just like the following code, I can get the object ID of each selected entity. But when I want to get the property of the DBEntity, just the center of a Circle entity, or the Position.X of a Point, I dont know how to Continue. The getExtent is the only function that I can writeout the property, it is List in the develop guide.
function setPromptSelectionOptions(options) { options.messageForAdding = " Please select some entities"
Juts had Acad LT 2009 re-installed on my new laptop, and all of my old settings, desktop preference etc have been wiped. No problem, couple of hours to set it back up.
BUT
When right-clicking on any object to bring up the properties, (line length, text height etc) the properties do not appear in the drop down box on the right, or in any 'quick properties' display
I saw that I can add Fields or store data in dictionaty, but those data are not showed in Properties Windows.
In not Acad-application (but .net application) I can create property description and add "virtual" properties with the use of designer. In Aced it doesn't work.
Is it possible to add custom properties from .NET?
i want to zoom object by its properties, such as i want to zoom the object was using 0.13mm lineweights or zoom the text which was using 3mm testheight
Is there a way to access AEC object (AEC_WALL etc.) properties from RealDWG? I am able to get the class name AecDbWall. And even the extents of the entity.There are some Aec*.dll files in the RealDWG folder but I am not sure what to use to get the properties of Wall,window.I'm using visual C++. I have installed the object enablers of Architecture Structure Drawing, MEP, and also of Civil.
I am working on a template for a project type (Residential). I have created all of my drawings, views, sheets, etc. I have a View drawing set up for a site plan - where I include some m-text regarding the survey and site plan information. I want to create fields that reference the Surveyor's Name, the Survey Date and the Project Address.
I tried creating custom properties in the project, but it appears that fields that reference the project properties only update on the sheet views in paper space. Is there a way of creating drawing specific fields in model space where I can input some data and them extract it in a field in model space that is quick and easy (as opposed to creating some type of MVB)?
I cannot change the color of any object in any drawing file from the properties manager or color command. I can change the color through the layer manager by assigning a new color to that layer, but cannot override the ByLayer and ByBlock settings with the object properties. The color drop down is simply grayed out. I am using Autocad lt 2006.
When selecting an AEC and going to the properties dialogue box I no longer have items showing up in the prpoerties like cleanup group, size, or endpoint type. It only has the general tab and 3d visualization. I did a repair from the uninstall software fromn control panel. I also rebooted. I don't want to do a reinstall becuase of customizations. I have vista Ultimate operating system.
When I pick the properties command sometimes the box comes up blank and the "Esc" key has to be pressed to bring up the box. When the box does come up the properties of a picked object does show and you cannot change the properties of the picked object. I am runnung AutoCadLT 2014.
