I am setting up a parts list using The Metric Catologue. In the Pipe Properties the Pipe Diameter shows mm but the Minimum Curve Radius shows inches. The Units are Greyed-Out. Is there a way to edit these Units?
View 5 Replies
I created a pipe network using Civil 3D 2011 and we upgraded to 2012 in the middle of the process.
I've always been able to edit the MATERIAL of the pipe for (I like to add class and type in this column)
It worked fine in 2011 as you can see in the first image.
But in 2012, the material changes that I added in 2011 chow up, but I can't edit them or revise them.
it causes me to have to label my pipes in the label editor instead of assigning the material property in the pipe properties with-in my pipe network.
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedI have tried to bring in the 3d block for a fire hydrant, exploded it and combined as 1 solid, added connection point. When using the Civil 3D 2013 "publishpartcontent" command it ask me to save the .content file but when creating the png it outputs an error in the command line. When I go to bring in the content in the catalog edditor I recieve an error saying .content file units do not match catalog. I have tried bring the part into both metric and imperial catalogs and recieve the same error. I also tried creating just a cylinder soli in a new draiwing and publishing the content file, I still recieve the error when it tries to create the .png but when I load it into the catalog it works. Is there any way to set the units of the solid within civil 3d before creating the .content file.
C3D 2013 SP1,
Win 7 64, Core i7,
16 GB RAM, Quadro 400
I am trying to change the default setting for "Pipe Flow Direction Method" currently it is set to "start to end" but I would like it to be "by slope". I have to assume there is a way to do this, I have tried everything i can think of.
Also need definitions of the "Pipe Flow Direction Method" options.I am currently using Civil 3D 2012, but will soon be moving onto 2014
What is the best way to edit the parameters of a pipe (slope, ie, size) once you have it drawn?
View 2 Replies View RelatedHow can I edit (graphically) my pipe network in plan view without losing my elevations every time I move a node? Every time I move a node I have to re-enter my invert elevations. Is there some way to "lock" my inverts? It may be useful to know my pipes have no structures linking them (water line).
View 4 Replies View RelatedWhat would be the best way to edit a pipe network's layout (pipe position, pipe slope, structure height, etc.)?
The easiest way I can think of is to create alignments of all the pipes in the network and then editing the grips in the profile view of each alignment, easily changing the pipe's slope and depth...
The catch with this method is that:
- it takes a while to create all the alignments needed;
- I have to manually adjust the alignments if I need to change the pipe network position on plan.
Using Building Design Suite Ultimate 2014
I have a pipe network, and I would like to edit the elevations of multiple pipes, similar to how I would edit the elevations of a feature line or an alignment, in a table. I can't figure out how to edit these besides just selecting pipe properties on each individual pipe.
View 6 Replies View RelatedI have a large number of profile views in Model space that I need to edit the Elevation values for all of them in the Profile View properties. Any way to select them all and edit the Profile View Properties? Maybe creating a group or something?
Civil 3D 2012
Win 7 Ultimate x64
Intel Core 2 3.2Ghz - 12MB RAM
Nvidia 8500GT Dual DVI
I have tried to edit the Properies of Parcel in Information and Description by using the following 2 methods:
Method #1: I started with Settings in Toolspace => work on Parcel Style and Label Style for setting up the desired data I want to input. Then I went to Prospector in Toolspace => Sites => Site 1 => Parcels => Property : 1 for editing the desired data.
Method #2: On the drawing area, I selected the created Parcel object by clicking on the Property : 1 to get the Properties tab. Then I edited the Information - Style, Parcel Area Label Style, Name. I went to Prospector => Sites => Site 1 => Parcels => Property : 1 => Information - Descrition for adding the desired data.
My questions:
Q1. Did Method #2 change any thing in the Settings in Toolspace?
Q2. What is advantage in each Method?
Q3. In the Settings for Method #1, I saw the following items:
Parcel
User-Pefined Property Classifications
Parcel Styles
Label Styles
Table Styles
Commands
What are User-Defined Property Classifications, Table Styles, and Commends for?
We're currently experiencing some strange behaviour with our pipe networks. Certain structures will not swap parts, but even more strangely, manhole height seems to be locked. Sumps will not adjust via grip edit or manual changes (see image: pipe connects to stucture, but sump will not update). Changing reference surfaces does not seem to work either. This occurs with all structures, even new ones, including ones created in brand new dwg files. I think the issue is related to the pipe catalogue (saved on a network path).
If you look at the attached images, the part appears to be modeled fine in part builder, but when that part is used in a style, I have a really random shape show up instead (although it still looks okay through object viewer for some reason). There have been some updates to some of the structures using part builder recently, is it possible that the pipe catalogue became corrupted somehow? or is there a way to refresh/regen the catalogue so that my drawings will update with the changes?
How the object is modelled is really not that important for our uses, we just need it to look okay in the profile views. It would also be nice if the sumps could be adjusted.
I created a pipe network from a object (alignment wLpolyline) I want to set my inverts at the inside edge
of my SDMH not the center. I go into Edit Pipe Networks then the vista (table). I don't see a option to do that.
Is there a setting in the SDMH structure style or somewhere else?
As an example I come in at 6250.0 at inside a 48" MH and go out at 6251.0 at other side of MH.
I wanted to use a catch basin that shows the depressed curb & lip like the one in the Pipe Network Video
but it not in my parts Library even when I create a full parts list it still isn't there. Is ther a way to go on line and download part structures?
Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedOne of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View Relatedis there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View Relatedthe properties palette started only showing the current properites for the drawing and not the properties of the entity selected. what causes this i am using autocad civil 3d 2013.
View 9 Replies View RelatedFor the last couple weeks I've been unable to view object properties or quick properties. If I right click on an object and select quick properties, a blank window comes up:
Similarly, if I bring up a properties window and select an object, the selection field remains blank and the object property fields are not populated with information relating to the selected object:
Is it possible to edit the properties of a dwg file that isn't open in AutoCAD via VB/VBA/VL? I want to add summary information to the comments text box without opening the files.
View 9 Replies View RelatedI've authored custom tube and pipe components, published them to library and created a custom tube and pipe style. But when I want to create a route with my custom style I get this error message "Edit route failed". The style only consists of a pipe and 90 elbow. All the other styles seem to work.
I also tried to create a custom style for tubing with bends and it worked fine so I guess it has something to do with my elbow.
My Acad experience is very old-school, and I have been away from true Autocad for a number of years.
I have been attempting to edit the properties of objects in the block editor and ran into a problem.
+ I select an object.
+ Right-click and choose Properties.
+ A list of properties is displayed, but they are not for the object I am trying to edit.
I did a test by selecting the object and using the command prompt, used the CHPROP command to change the objects color. It did change color as expected.
However, when I used the right-click/properties method, the properties shown do not show the new color. So, I suspect that my right-click/properties method is not showing me the object's properties. But, rather the default properties when any new objects are created.
So, obviously right-clicking is not the way to get there. What am I missing?
In my idw, when I right-click on my section view line (or the section view itself), I want to change the section depth from full to some distance. Problem is there is not a "Edit Section Properties" in the context menu.
There are other section views on this sheet and they will display "Edit Section Properties" in the context menu.
Any clues as to why I dont get a context menu on just this one section view? I could delete the view and redimension everything, but I had rather not.... Its got several dims on it.
Cant post the file either... its pretty large.?The idw itself is 16mb, not counting all the parts/assemblies.
How would I go about editing drawing properties (Title, Author & custom props) without using AutoCAD. I need to replicate within VB.NET the windows explorer RMB > Properties capability.
I have heard mention of DWGProps.dll but cannot find it anywhere.
Is there any way to edit multiple attribute properties, NOT using battman? While battman will chnage every att-block within the drawing, I'm looking for a way to change the text size of one specific line of text within an attribute, and ONLY change it in a certain few within the drawing. It'd be nice if I can select those specific blocks and change the properties in the properties manager, but it's not an option.
View 7 Replies View RelatedI am running Architecture 2014 (PrDS-U) on a Windows8 Pro N.
In Architecture I am a frequent user of the Project Navigator.
After moving to W8, I find that I can not edit Project properties, neither from Project Browser nor the Navigator.
The project resides on my local C:VCC and the folder is being shared on my network. It is not write protected. Everyone has full access.
Others who are connected to the share can edit the project, they are running Windows 7. I cannot.
I am facing problem with editing content center library. Find attached file for more details. soft ware is asking for read / write library. I have 2011 version there is only read only option.
What will i have to do for the same.
Working in AutoCAD 2013LT-my Layer Properties Manager has stopped allowing me access. When I open a drawing layers all come however I get a pop-up note that says: "ALL LAYERS ARE ALREADY INCLUDED IN THIS LAYER STATE. NO LAYERS CAN BE ADDED"
What happened-even when I try to edit layers they will not show up in the Properties Manager as changed.
When editing the properties for the title block on each sheet of my drawing, I've become rather annoyed with the default column width of the Value column. It always opens to the same width no matter how many times I change it. Every time I edit something in the title block, I have to resize this column to see everything I'm editing.
Any way to change the default width it opens at?
Infrastructure DSP '14 / Product DSP '14 / Vault Professional 2014
Dell Precision T1650
Windows 7 Professional SP1 64-bit
Intel E3-1270 V2 3.5GHz / 32G RAM
Nvidia Quadro 2000, Driver 331.82
Space Navigator, Driver Version 6.17.7
I'm looking for a lisp routine that i can globally change the text height and width factor of a particular block attribute. The name of the attribute tag is "TAG". I would like to be able to select all the blocks that i need to edit and then specify what text height and width factor i want to change to.
View 9 Replies View RelatedI am attempting to bring a DEM into Civil 3D using the "create surface from DEM" function. I am successful with this, but the units for the DEM appear to be correct for X-Y and incorrect for elevation. The original DEM has metric X-Y coordinates and English elevations. I would like all to be in English units in the Civil 3D file.
The elevation values and X-Y values have been reduced by a factor of 1/3.208 as I have set the drawing units to English. This is correct for the X-Y, but incorrect for the elevation as the original DEM has metric X-Y coordinates and English elevations.
