AutoCAD Civil 3D :: Bringing DEM Units
Jun 13, 2012
I am attempting to bring a DEM into Civil 3D using the "create surface from DEM" function. I am successful with this, but the units for the DEM appear to be correct for X-Y and incorrect for elevation. The original DEM has metric X-Y coordinates and English elevations. I would like all to be in English units in the Civil 3D file.
The elevation values and X-Y values have been reduced by a factor of 1/3.208 as I have set the drawing units to English. This is correct for the X-Y, but incorrect for the elevation as the original DEM has metric X-Y coordinates and English elevations.
View 1 Replies
ADVERTISEMENT
Dec 3, 2013
My drawing is set in millimeters, the drawing i want to xref (which i only have read-access to and can't modify) should be in millimeters, but the UNITS are set to inches.. so the door appears to be 900 inches instead of 900 mm for example.
is there a way to bring this drawing in at the correct scale? i was looking at INSUNITS but it doesn't really have something that would set up my scale factor to 1/25.4, which i think is what i would need to do this.. is there a way to do this without manually scaling the xref after it's brought in?
View 4 Replies
View Related
Jul 3, 2013
I am attempting to bring a 2D ACAD sketch into Inventor in order to make a 3D model of a part. I am able to import the ACAD sketch in, however, Inventor's units are set to "inches". The ACAD drawing is in mils (thous) since it is derived from a printed circuit board (PCB). The issue is that Inventor thinks the sketch is 8500 inches long instead of 8.5 inches long.
View 3 Replies
View Related
Dec 13, 2013
I am having a problem with bringing in points from Autocad Civil 3d 2014 into older drawing files. Is there any way to do this and the points show up? when I bring the points in as .AUF or PENZD format, they do not show up... Is there any solution for this? or would I have bring the points into a blank drawing file,then xref the aforementioned points into the drawing I need them in? I have had this problem multiple times.. I have checked the regular solutions(Point styles, point groups, layers, froze, etc...) and they still wont show up..
View 7 Replies
View Related
Aug 21, 2013
I'm working as a contractor for a consulting firm and I'm inputting station points using alignments in to my c3d 2013 drawings.
The issue arises when people in the main office need to revise my drawings in their 2011 version of autocad and the station points come out as a surrounding the pline rectangle; a.k.a. crap-o-la.
I've tried saving the station points themselves (or the "alignment", that is) as a block and a wblock but when I input those in to their 2011 version the block comes in as an "OLE" and my lines are incased in a white rectangle and cannot be used further as part of the drawing.
Is there any other way to alignment make the transition from c3d to 2011 regular?
View 3 Replies
View Related
Oct 13, 2009
Is it possible to define new unit, e.g. hectometer (=100m)?
View 4 Replies
View Related
Mar 26, 2012
AutoCAD Civil 3D 2012
I am trying to create an alignment from existing polyline that I had recieved from another companies drawing. It was alignment in their drawing but only comes through as linework. That's not the problem. The problem is that when I try and create a new alignment out of the existing polyline, the units are way off. the existing drawing had ticks every 100 feet obviously, but after I create my alignment, I get like 400-500 feet in before the existing one gets 100. Trying to find a scale issue, but not seeing one.
View 3 Replies
View Related
Aug 27, 2013
I'm playing with "getting started" cvs & xml data..
I load files and see the data but not the units
- In addition I can't associate items to my corridor codes (code set styles)
- also I can't use the search filter on QTO manager
Civil 3D (2013) how much you have to improve....
View 1 Replies
View Related
Oct 16, 2012
I have a drawing that was given to me by an architect with a scale 1:250 (0.004 in viewport). The architect drew everything in millimeters and it's a Site Plan, why ? I do not know. The units in the drawing are decimal-millimeters.
The page set-up for layout 1 was for 24x36 drawing size (typ.)I know need to make a layout 2 for a sheet size 11x17 but I can not get my viewport to scale correctly. So, if a 24x36 sheet size had a VP with scale 0.004 (1:250) then what is the scale for a sheet size 11x17 ?
View 3 Replies
View Related
Feb 15, 2012
I have a contour label style that is using metric units instead of imperial. Where in the style or defaults is this controlled? Also, is there a way to tell what the units are from the contents? <[Surface Elevation(Um|P3|RN|Sn|OF|AP|GC|UN)]>
View 9 Replies
View Related
Feb 22, 2012
I have an old dwg that I used to add new data to. I also inserted a block produced by Revit to get a building elevation. I am not sure when or how it happend, but my drawing scale units are stuck on arch. I am talking about the bottom right hand corner of the screen on the status bar where there is the spot to set drawing scale. When I open by clikcing the arrow all the scales are in architectural units. I can add a custom scale of 1"=100', but it does not otherwise appear in the list. I wasn't going to wrry about it, but when I layout a plan/pro series they do not seem to be scaling correctly (and I cannot find a place to specify what scale I want the views to be at). UNITS, -DWGUNITS & -AECDWGUNITS don't fix it, they are all set to decimal, etc. Using the seetings tab to change the drawing settings, everything is set to feet, there is no place to specify arch units, the 100 scale drawing is shown as a custom scale.
This is C3D release 2012, on a 64bit Win7 Pro machine, everything is up to date.
Where I can change the units for the drawing scale?
C3D 2012 on 64bit Win 7 all up to date
Dell Precision 7core 8GB RAM
NVIDIA Quadro FX 1800M
LDT/C3D user since release 12
View 2 Replies
View Related
Nov 5, 2012
I'm using the exporttoautocad command to convert a 3D drawing with a proposed surface (a TIN object) into a drawing with just contours (polylines with elevations). My original drawing is in feet and has a NAD83 state plane coordinate system.
Everything seems great in the exported dwg, except it is converting the elevation units from feet to inches!? A contour that was originally at an elevation of 7.0 feet, ends up at 7 inches in the exported drawing. Spatial coordinates are preserved.
View 9 Replies
View Related
Nov 3, 2013
how the scales and printing works.
first i am working in meters .meters is choosen under the drawing settings tab .i am trying to test print at 1:1 a rectangle with 0.2 meters side that normaly will fit in a A4 sheet since the A4 is 0.21x0.297 METERS .
in the print dialogue i set the 1"mm" = 0.001 "units". the result is an image multiplied by 1000...arent the " units " METERS? METERS is what i use in the drawing so why i get a biger image?
if i set 1"mm"= 1 "unit" and NOT 0.001 i get correct 1:1 print .
what i am missing? c3d wants me to give 1mm=1meter?
View 2 Replies
View Related
Jan 22, 2013
My drawing is set to state plane and feet. when I import GE the elevations are different that those reported on the GE screen. For example at a given location GE reports 538 but the c3d surface report 164 a factor of 3.28. sounds like a meter thing going on. is this normal?
64 Bit Win7 OS
View 8 Replies
View Related
Jun 20, 2011
I created an alignment from an existing line and am having an issue with the stationing. The length of the original line is about 14,666 ft but when I convert it to an alignment it is 1,222 (1/12 of original).
View 8 Replies
View Related
Jan 15, 2013
I am setting up a parts list using The Metric Catologue. In the Pipe Properties the Pipe Diameter shows mm but the Minimum Curve Radius shows inches. The Units are Greyed-Out. Is there a way to edit these Units?
View 5 Replies
View Related
Jul 22, 2013
[URL]
with this I changed placement of coordinates from being outside of a viewport to inside.
However, I still do like this unnecessary zeros in the end of numbers.
Do you know how to get rid of them in a code?
View 2 Replies
View Related
Jan 18, 2013
In Civil 3D 2013, when I execute the _area command, i get results in square feet as opposed to acres. Under the ambient settings, the area unit is set to acre. how to get C3D to display my area in acres? I just want it to list the area, not label it.
Also, is there a way to get it to display the area in BOTH acres and square feet?
View 6 Replies
View Related
Jun 6, 2013
how to turn off the units in the output table for the Incremental Station Elevation Difference Report of a profile?
It currently adds "m" to the end of my data which makes it difficult to get working in excel (the "m" makes it a text cell and doesn't allow calculation, unless you can ignore letters in excel).
View 2 Replies
View Related
Mar 1, 2013
I have tried to bring in the 3d block for a fire hydrant, exploded it and combined as 1 solid, added connection point. When using the Civil 3D 2013 "publishpartcontent" command it ask me to save the .content file but when creating the png it outputs an error in the command line. When I go to bring in the content in the catalog edditor I recieve an error saying .content file units do not match catalog. I have tried bring the part into both metric and imperial catalogs and recieve the same error. I also tried creating just a cylinder soli in a new draiwing and publishing the content file, I still recieve the error when it tries to create the .png but when I load it into the catalog it works. Is there any way to set the units of the solid within civil 3d before creating the .content file.
C3D 2013 SP1,
Win 7 64, Core i7,
16 GB RAM, Quadro 400
View 1 Replies
View Related
Mar 8, 2013
In my profile view I have existing and proposed levels in m.
The level difference is also in m but I'd like it to be scaled to show mm, as this is quicker to read on site.
Is there some way to edit the equation and multiply by 1000?
View 6 Replies
View Related
Jun 18, 2012
I'm using map import to bring in xyz points and they have come in ok, except that they are flipped horizontally.
(they come in as a block)
How to flip them back? Perhaps there is a command that rotates objects all at one time *not* based on one central point.
View 5 Replies
View Related
Jan 26, 2012
I am trying to bring in a KML file into CAD. Specificaly, I am trying to bring the contour lines in as polylines/lines. Is there a way to convert KML into DWG/DXF files that can be opened? I can live without the heights being part of it as I can just refer back to my Google Earth to get that information, I just need the lines themselves.
View 1 Replies
View Related
Nov 13, 2013
recently installed inventor pro 2014 on a school computer for a project we are doing, one problem. when i click 2D sketch nothing happens, so i have no wau to make a sketch.
View 2 Replies
View Related
Jul 15, 2012
I am drawing a floor plan in my autocad and if i want the entire floor plan to be moves to the origin how i can do it.
And also if i make the dimension and the text and when i plot and set different scales and different viewports how i can get the same size of the text and dimension on both the viewports on the layout.
View 4 Replies
View Related
Jun 3, 2013
I select a component in my assembly, right click to get the context menu, and suddenly my component is no longer selected. I get the generic context menu. I have to select the part from the model tree to get the specific context menu. What did I turn on... or off to get this annoying behavior? Who did I anger... I've been good, I promise!
AutoCAD 2013; AuoCAD Electrical 2013; IV 2013 Professional: Tube and Pipe, Frame Generator, Content Center; Vault Professional 2013: Client, ECO
Win 7 x64, Dell Precision T7500, Intel(R) Xeon(R) CPU X5677@3.47GHz, 12 GB RAM; GeForce GTX580; 3DConnexion Space Explorer, Evoluent Vertical Mouse 3.
[URL]
View 4 Replies
View Related
Mar 15, 2008
I'm using Photoshop CS2 on XP Media Center Edition. I cannot, for the life of me, find out how set the default dpi of images being brought into Photoshop.
At the moment I'm using an Action but that's pretty time intensive when I have to bring in more than a few photos. Sometimes I have 2 or 3 hundred to do.
View 8 Replies
View Related
Nov 6, 2011
Is it possible to bring different layers to the front in different parts of an image?
I'm working on a project that involves putting together 100x100 pixel squares from different images. I start with one image in each layer and delete 100x100 chunks of different layers until the image I need for that square is visible.
View 1 Replies
View Related
Mar 25, 2014
I am editing an image to match another completed version of the same image. When I bring in my working copy with some edits to the x/y window to compare, my working copy appears unedited.
View 3 Replies
View Related
May 18, 2009
I took a one-day course on Photoshop with NAPP and the instructor was showing us how to bring a photo closer together where the objects are closer but it doesn't distort the photo.
View 2 Replies
View Related
Feb 22, 2013
Just Starting with new Revit LT 2013(The Comparison chart from Autodesk lists the differences between LT and Full Revit as no Massing, Rendering and no multi user collaboration) Everything else should be the same!
I'm using 'LT_USI_Residential-Default' Template for my project.In the Stair Family, I have a few options, but not the '7"max riser 11" tread' stair that is available in other Templates.Is there a way to bring that Stair Family into the Template?
Maybe I don't know the 'workarounds', but none of the Stairs available in the above Template have changeable 'width' parameter under 'Dimensions' in the properties window.No matter what I do, all Stairs are first drawn 4' wide, and then I have to edit the width, but it's a pain since I get bunch of error messages and Landings often can't complete and needed to be manually added later.Even though the Type Properties list all stairs widths as 3' min., they still all draw as 4'.What's wrong with these Stairs?
View 3 Replies
View Related
