I took a one-day course on Photoshop with NAPP and the instructor was showing us how to bring a photo closer together where the objects are closer but it doesn't distort the photo.
View 2 RepliesI am trying to do is use the wand around an object so I have only it on a layer, then cut that object and paste it in another program, this time it happens to be powerpoint. But when I do that, it brings the white b/g square that is around the object with it, and then I have a big block photo. I've tried a couple different things, but I can't get a good clone over to my presentation.
View 2 Replies View RelatedWhy combine objects together cut bottom side of combined objects?
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
Is there a reason why I cannot get the sentences in my paragraphs closer together?
View 6 Replies View Related1) when I go to the shortcut for my workspace in the menu items called "my workspace", CS2 asks me "do you want to save changes to the current shortcut file, before you reset the shortcut"
I'VE NEVER UNDERSTOOD THIS. this is the only shortcut in all of PHotoshop that ask me this question. I don't get it, and I've posted repeated about this.
I always choose no, since I don't understand why this and only this shortcut ask.
2) Why every few weeks do all the shortcuts I've assigned in the last month disappear? posted a few on this too with no resolution.
Now today got closer:
today, when I chose not to save the workspace shortcut (why I have to chose every time, still don't know), and then BAM, all my new shortcuts were discarded -- even ones that have been working consistent for last few weeks. why?
and... if I chose save, then a dialogue box comes up asking if want to replace current set of shortcuts. that's fine, but why would I be going through all that just to quickly get my workspace back in order? I don't get it.
Why does 12pt text display huge (closer to 40pt) even though it is specced as 12pt?
View 2 Replies View RelatedHow do I move the text closer together in this masthead. I want the Rubia Advertising to be just above the line and the phone number to be just below it.
[URL]
I am totally new with photo editing and barely know anything about GIMP, so I need a ton of detailed explanation.
Here is the image:
Image 41
I want to make the girl in the middle closer to the two guys, right now it looks a bit awkward. How can I do this while keeping the integrity of the background.
I'm using Photoshop CS2 on XP Media Center Edition. I cannot, for the life of me, find out how set the default dpi of images being brought into Photoshop.
At the moment I'm using an Action but that's pretty time intensive when I have to bring in more than a few photos. Sometimes I have 2 or 3 hundred to do.
I have an important question about how to set up my files for print. In school I was taught to work in CMYK or at least convert whatever RGB file I'm working on to CMYK. I'm at work now and the files I am printing are coming out dull (in CMYK). I converted a file to RGB and assigned the RGB 1998 colour space and re printed it. The first CMYK print looked grey and was not vibrant. The new RGB print printed very vibrant and matched the screen colours better than the CMYK. My boss wants me to do the rest of the prints in RGB seeing as it prints with better vibrancy. Also, I am working in Illustrator.
Â
So my question is: Can I convert all my CMYK files to RGB, send them to the printing company and expect the prints to be vibrant? Or will converting my CMYK files to RGB mess up the printing companies standards?
Â
RGB prints better, but I was taught to always print in CMYK mode.
Â
Actually I'm going to leave the files in CMYK since turning them into RGB may cause colour loss during the final large prints. I will print the presentation files in RGB though.
Bringing photos from My Pictures (Windows) to Elements Organizer will mean doubling the the use of hard disk space. Right?
View 1 Replies View RelatedI have attached a view of a wall. I remember seeing a video showing how to take a wall detail like this. Cut and move the lower portion closer.
View 4 Replies View RelatedI'm using Photoshop CS3 in a macbook pro under windows XP. When I opened this photo, the objects look shorter than they did when I first created this composition using the same version/same release of PS CS3 that I'm using now in my old laptop (HP Compaq Presario X6000 running Win XP). How can I fix/eliminate this? Top photo: Dialogue box I get before image loads Bottom: objects (desk, chairs, characters) look shorter/fatter than they did previously
View 6 Replies View Related[URL]....
View 6 Replies View Relatedhow to create B&W photos but with colored objects. For example having a B&W photo of a kitchen table with plates etc. yet the apple in the fruit bowl is red.
View 1 Replies View RelatedHow to I set the default for when I duplicate part of an image and want it to stay closer to what I am working on in X-5.
View 2 Replies View RelatedI have a stock photo of an item I want to sell but the picture shows some accessories I don't have so how do I remove these items and replace the space with the background. There are no layrers in the photo
View 1 Replies View RelatedI'm having trouble getting the edges of my eyes to look like they are part of the chair, which got me wondering. Is there a way to feather my edges with increased intensity closer to the edge? To be specific, I'd like to start the feather 100px inside the border with 60% opacity, all the way to the edge (border) with 0% opacity. I tried doing this manually a couple of ways and it just didn't look uniform.
I have also tried with the eyes seperated (without the middle area), but I still have the same issues.
I'm using map import to bring in xyz points and they have come in ok, except that they are flipped horizontally.
(they come in as a block)
How to flip them back? Perhaps there is a command that rotates objects all at one time *not* based on one central point.
I am attempting to bring a DEM into Civil 3D using the "create surface from DEM" function. I am successful with this, but the units for the DEM appear to be correct for X-Y and incorrect for elevation. The original DEM has metric X-Y coordinates and English elevations. I would like all to be in English units in the Civil 3D file.
The elevation values and X-Y values have been reduced by a factor of 1/3.208 as I have set the drawing units to English. This is correct for the X-Y, but incorrect for the elevation as the original DEM has metric X-Y coordinates and English elevations.
I am trying to bring in a KML file into CAD. Specificaly, I am trying to bring the contour lines in as polylines/lines. Is there a way to convert KML into DWG/DXF files that can be opened? I can live without the heights being part of it as I can just refer back to my Google Earth to get that information, I just need the lines themselves.Â
View 1 Replies View RelatedIs it possible to bring different layers to the front in different parts of an image?
I'm working on a project that involves putting together 100x100 pixel squares from different images. I start with one image in each layer and delete 100x100 chunks of different layers until the image I need for that square is visible.
I am editing an image to match another completed version of the same image. When I bring in my working copy with some edits to the x/y window to compare, my working copy appears unedited.
View 3 Replies View Relatedrecently installed inventor pro 2014 on a school computer for a project we are doing, one problem. when i click 2D sketch nothing happens, so i have no wau to make a sketch.
View 2 Replies View RelatedJust Starting with new Revit LT 2013(The Comparison chart from Autodesk lists the differences between LT and Full Revit as no Massing, Rendering and no multi user collaboration)Â Everything else should be the same!
I'm using 'LT_USI_Residential-Default' Template for my project.In the Stair Family, I have a few options, but not the '7"max riser 11" tread' stair that is available in other Templates.Is there a way to bring that Stair Family into the Template?
Maybe I don't know the 'workarounds', but none of the Stairs available in the above Template have changeable 'width' parameter under 'Dimensions' in the properties window.No matter what I do, all Stairs are first drawn 4' wide, and then I have to edit the width, but it's a pain since I get bunch of error messages and Landings often can't complete and needed to be manually added later.Even though the Type Properties list all stairs widths as 3' min., they still all draw as 4'.What's wrong with these Stairs?
I am drawing a floor plan in my autocad and if i want the entire floor plan to be moves to the origin how i can do it.
And also if i make the dimension and the text and when i plot and set different scales and different viewports how i can get the same size of the text and dimension on both the viewports on the layout.
My drawing is set in millimeters, the drawing i want to xref (which i only have read-access to and can't modify) should be in millimeters, but the UNITS are set to inches.. so the door appears to be 900 inches instead of 900 mm for example.
is there a way to bring this drawing in at the correct scale? i was looking at INSUNITS but it doesn't really have something that would set up my scale factor to 1/25.4, which i think is what i would need to do this.. is there a way to do this without manually scaling the xref after it's brought in?
I am attempting to bring a 2D ACAD sketch into Inventor in order to make a 3D model of a part. I am able to import the ACAD sketch in, however, Inventor's units are set to "inches". The ACAD drawing is in mils (thous) since it is derived from a printed circuit board (PCB). The issue is that Inventor thinks the sketch is 8500 inches long instead of 8.5 inches long.
View 3 Replies View Relatedbringing in 3d tracking data from pf matchit into smoke and flame?
[URL]
bring back my site plan view!, and the ability to use shadow and realistic material!because when  did another site view i am unable to use shadow and realistic view!
View 1 Replies View Relatedit seems to only be doing this on 50 x 0 in 72dpi unnamed (not given an extension yet) pictures!!! every time I have a picture of that size and I bring down ANY menu (such as 'edit') it causes Gimp to be unstable and freeze and I lose EVERYTHING in ALL pictures I have up after closing the nonresponsive process!
View 1 Replies View Related