AutoCAD Civil 3D :: Edit The Parameters Of A Pipe
May 10, 2012What is the best way to edit the parameters of a pipe (slope, ie, size) once you have it drawn?
View 2 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Edit Pipe Network - How To Trim Pipe That Pass Through Manhole
Sep 25, 2012I created pipe network for my storm drain project. I have located all the structures (manhole) to all angle point of my alignment as required. Also I "insert" manhole every 400' per local code requirements using the command "network layout tools; structures only. My problem is I couldn't find the tools how to trim the pipe that pass through the manhole. Please see attached pdf file.
View 1 Replies View RelatedAutoCAD Civil 3D :: Edit Pipe Network In Plan
Aug 24, 2012How can I edit (graphically) my pipe network in plan view without losing my elevations every time I move a node? Every time I move a node I have to re-enter my invert elevations. Is there some way to "lock" my inverts? It may be useful to know my pipes have no structures linking them (water line).
View 4 Replies View RelatedAutoCAD Civil 3D :: Edit Pipe Network Layout?
Jul 5, 2012What would be the best way to edit a pipe network's layout (pipe position, pipe slope, structure height, etc.)?
The easiest way I can think of is to create alignments of all the pipes in the network and then editing the grips in the profile view of each alignment, easily changing the pipe's slope and depth...
The catch with this method is that:
- it takes a while to create all the alignments needed;
- I have to manually adjust the alignments if I need to change the pipe network position on plan.
Using Building Design Suite Ultimate 2014
AutoCAD Civil 3D :: Edit Units For Pipe Properties
Jan 15, 2013I am setting up a parts list using The Metric Catologue. In the Pipe Properties the Pipe Diameter shows mm but the Minimum Curve Radius shows inches. The Units are Greyed-Out. Is there a way to edit these Units?
View 5 Replies View RelatedAutoCAD Civil 3D :: Edit Pipe Elevations In Table?
Sep 11, 2013I have a pipe network, and I would like to edit the elevations of multiple pipes, similar to how I would edit the elevations of a feature line or an alignment, in a table. I can't figure out how to edit these besides just selecting pipe properties on each individual pipe.
View 6 Replies View RelatedAutoCAD Civil 3D :: Unable To Edit Parameters In Corridor Section Parameter Editor
Nov 11, 2013Unable to edit parameters in Corridor Section Parameter Editor
View 4 Replies View RelatedAutoCAD Civil 3D :: Can't Edit Material In Pipe Properties 2012
Aug 5, 2011I created a pipe network using Civil 3D 2011 and we upgraded to 2012 in the middle of the process.
I've always been able to edit the MATERIAL of the pipe for (I like to add class and type in this column)
It worked fine in 2011 as you can see in the first image.
But in 2012, the material changes that I added in 2011 chow up, but I can't edit them or revise them.
it causes me to have to label my pipes in the label editor instead of assigning the material property in the pipe properties with-in my pipe network.
Currently operating Autodesk Civil 3D 2012, AutoCAD 2012, Bentley MicroStation V8i
AutoCAD Civil 3D :: Pipe Network / Sumps Will Not Adjust Via Grip Edit Or Manual Changes
Jan 10, 2013We're currently experiencing some strange behaviour with our pipe networks. Certain structures will not swap parts, but even more strangely, manhole height seems to be locked. Sumps will not adjust via grip edit or manual changes (see image: pipe connects to stucture, but sump will not update). Changing reference surfaces does not seem to work either. This occurs with all structures, even new ones, including ones created in brand new dwg files. I think the issue is related to the pipe catalogue (saved on a network path).
If you look at the attached images, the part appears to be modeled fine in part builder, but when that part is used in a style, I have a really random shape show up instead (although it still looks okay through object viewer for some reason). There have been some updates to some of the structures using part builder recently, is it possible that the pipe catalogue became corrupted somehow? or is there a way to refresh/regen the catalogue so that my drawings will update with the changes?
How the object is modelled is really not that important for our uses, we just need it to look okay in the profile views. It would also be nice if the sumps could be adjusted.
AutoCAD Civil 3D :: 2012 Edit Pipe Networks Set Inverts At Inside Edge Of SDMH
Apr 26, 2013I created a pipe network from a object (alignment wLpolyline) I want to set my inverts at the inside edge
of my SDMH not the center. I go into Edit Pipe Networks then the vista (table). I don't see a option to do that.
Is there a setting in the SDMH structure style or somewhere else?
As an example I come in at 6250.0 at inside a 48" MH and go out at 6251.0 at other side of MH.
I wanted to use a catch basin that shows the depressed curb & lip like the one in the Pipe Network Video
but it not in my parts Library even when I create a full parts list it still isn't there. Is ther a way to go on line and download part structures?
AutoCAD Inventor :: Pipe With Ports On One Side - True /False Parameters
Aug 29, 2012I am working on a pipe with a ports on one side. I created a True/False parameter to determine whether the ports are on one side or two and created a rule that does that, but now I am stuck with the CC:
Is there a way to publish a part to the content center with a true/false parameter? I made a rule to designate what true and false means but when I publish it to the content center I want to be able to choose whether it's true or false and it doesn't seem to be working. I also tried to publish without the T/F parameter and then after placing it just change the T/F parameter but I cannot change any parameter of a part that I placed from the content center.reciated.
AutoCAD Civil 3D :: Pipe Network Storm Sewer Pipe Plan View
Nov 20, 2013Pipe network storm pipes: Fairly new to Civil3D and trying to set up parts list for the storm sewer pipe and would like the plan view to appear as it does currently. We use a polyline for centerline of pipe, similar to dashed linetype but line and space are the same, width set to pipe width.
View 1 Replies View RelatedAutoCAD Civil 3D :: Depicting Both Slice And Cross Cut Pipe Profiles Of One Pipe
Jan 8, 2014One of the things I seem to struggle with is being able to depict a single pipe when it needs to be shown in one profile as a crossing pipe, and another profile where you you show a lenghwise slice through the pipe. I end up tracing the pipe with eliptical objects where I'm cutting across the pipe and setting up more for the lengthwise/sideview of the pipe. Is there a way to have two different styles for the same pipe, one for a cross cut and one for a lengthwise slice?
View 1 Replies View RelatedAutoCAD Civil 3D :: How To Include Pipe Min / Max Cover As Part Of Str / Pipe Label
Nov 26, 2013is there a way to include the pipe min/max cover as part of the str/pipe label?
Civil 3D 2013 SP1, Win 7-64 bit
12GB RAM
AutoCAD Civil 3D :: Connecting Pipe To Different Pipe Network Structure
Jun 20, 2012Using Network Layout Tools, can you attach a pipe to a structure in a different Pipe Network? 2013 Civil 3D
View 6 Replies View RelatedAutoCad :: Keeping Parameters With Edit In Place
Feb 27, 2012I have some blocks that I want to use to make a drawing. In the attached dwg, there are a few blocks inserted, and a shape made from those blocks.
As they stand, I can send the dimensions of each block into an excel spreadsheet or into a table. However, as you can see, if I want to make that triangle look like a triangle, I need to edit the blocks themselves. I'd like to edit each block in place (even though I'll have to create a new block for the edited version, that's okay), and still be able to reference the length of each block in excel.
If possible, I'd also like to figure out how to reference the angle into excel, so that when I look at the excel table, it tells me that I need that piece of material, cut to that length, with that angle.
AutoCAD VB :: Userform To Edit Parameters Manager Dimensions
Mar 2, 2011I have come to a road block, I am for a lost of how to connect the information that i type into textboxs and to change the values of dimensional constraint parameters ex. d1 d2 d3
View 4 Replies View RelatedAutoCAD 2010 :: Edit Array With Parameters Manager
Oct 23, 2012I want to make a grid that is adjustable by editing parameters. I want to change the size of the blocks. And i want to change the number of blocks in the x-direction and y-direction.
I have created a square with a width of 50mm and a height of 20mm. I have created 2 parameters called width and height. Next I added dimensions to the square and i call those dimensions width and height. Now I can adjust the width and height of the square by editing the parameters.
Next I want to copy this square in the x- and y-direction so that you get a grid. The number of copies in x-direction I call number-x. The same in the y-direction.
I then link the number-x and number-y to 2 parameters that i have named number-x and number-y.
The distance between the squares has to be the same as the size of the first square. Only then you get a grid. So i created parameters for this to. I call them width2 and height2.
Now I can adjust the size of the grid by editing these parameters. When i change number-x or number the grid becomes larger. But when i want to change the size of the initial square, it doesn't work. I think because of the fact that the first square has become a part of an array.
How to make a grid that is adjustable nu editing parameters in the parameters manager?
AutoCAD Inventor :: Edit Derived Part And Include Parameters
Apr 4, 2011How do I edit a derived part with a part file and include parameters I'm after?
I cant' seem to work out how to get to the reference components parameters to select whats visible and not visible.
AutoCAD Inventor :: Tube And Pipe Run - Edit Route Failed
Nov 28, 2013I've authored custom tube and pipe components, published them to library and created a custom tube and pipe style. But when I want to create a route with my custom style I get this error message "Edit route failed". The style only consists of a pipe and 90 elbow. All the other styles seem to work.
I also tried to create a custom style for tubing with bends and it worked fine so I guess it has something to do with my elbow.
AutoCAD Civil 3D :: SAC Using Target Parameters
Dec 16, 2013I am building sub-assembly, I just want to know if there is any example or tutorial on how to add target parameters to sub-assemblies.
View 6 Replies View RelatedAutoCAD Civil 3D :: Invalid Set Of Parameters In URL
Dec 30, 2012It happens when I try to use the "back" button on the web page when reading posts.
I am using Google Chrome.
AutoCAD Expert Elite
AutoCAD Civil 3D 2014 Certified Professional
C3D 2014 (SP1)
Win 7 Pro, 64-bit
AutoCAD Civil 3D :: Objects Having Parameters Like Revit
Aug 10, 2012I am currently using Civil 3D 2011 and 2012 but soon making the jump to 2013.In my project I want to able to present a 3D-object from Civil 3D 2011 to Navisworks, eg the body of a road. I am doing this currently with the add-on program from Autodesk Labs named Corridor Solids. The several different 3D-objects that represent the different layers of the road body needs to have a certain set of parameters. For instance, Name, Dimensions, Material and so forth.
Currently, the only thing that I can present in Navisworks is the layer name that I associate to that object when I export it from Civil 3D with Corridor Solids.Is there a way, in vanilla Civil 3D or perhaps an add-on program that I can use to associate more parameters to a solid?
AutoCAD Civil 3D :: Mill And Overlay Parameters
Dec 19, 2013I am trying to overlay a large area,I have a design profile grade that I must use. I need the new edge of the overlay pavement to be 2" above the existing as long as the pavement cross slope is between 1% to 1.5% . If the slope goes above or below the min or max I need it to take the min or max. If I use the overlaymillandlevel2 I am unable to get it to use the overlay thickness since i am using a profile.
civil 3d 2011 with all service packs, Window 7
Intel E5630 @ 2.53GHz 2.53GHz
8 Gig Ram
AutoCAD Civil 3D :: Description Key Format Using Parameters
Feb 21, 2012Is there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
AutoCAD Civil 3D :: Editing Subassembly Parameters
Aug 1, 2013I am using one assembly for this project and of course the existing surface does not always work well with one assembly so I have been using the corridor section editor to adjust each station individually. Attached is a picture of my first station, I started with a 3:1 fore slope (left side) and have changed it to a 2:1 slope. However, my ditch line elevation did not adjust and my parameter editor will not let me adjust the beginning elevation for the ditch line. I am curious as to what the simple solution is for this so my ditchline and back slope or slope to surface will be portrayed correctly.
View 4 Replies View RelatedAutoCAD Civil 3D :: Multiple Point Parameters
Feb 4, 2013Any way to create multiple lines in the full description so that i can display multiple parameters in the label?
i.e. instead of Cottonwood 48" Live
i want Cottonwood
48"
Live
AutoCAD Civil 3D :: Change Applied Subassembly Parameters?
May 12, 2013Is there a way to change programmatically parameters of applied subassembly?
View 1 Replies View RelatedAutoCAD Civil 3D :: Label Styles And Description Key Parameters
Jan 5, 2014I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedAutoCAD Civil 3D :: Scale Two Point Symbol Parameters?
Nov 5, 2008I need to scale the trunk and canopy on importing of a points file. I can scale one parameter through the description keys (So i have been doing the canopy) but would like to do both. My code is Tree 0.5 10. Parameter one being the trunk diameter and parameter two being the canopy size.
View 4 Replies View RelatedAutoCAD Civil 3D :: Modification Of Subassembly Parameters In Corridors
Jun 25, 2013Is it possible to change the parameters of a subassembly - for example in an assembly comprising several subassemblies, can I change a parameter in Subassembly.LaneOutsideSuper, for example, to vary the Lane Width from 4m at CH90 to 3.25m at CH160m and keep it at 3.25m for the rest of the corridor.
I am new to Civil3D.