AutoCAD Civil 3D :: Change Applied Subassembly Parameters?
May 12, 2013Is there a way to change programmatically parameters of applied subassembly?
View 1 Replies
ADVERTISEMENT
AutoCAD Civil 3D :: Change Sequence Of Input / Out Parameters In Subassembly Composer?
Mar 13, 2012When I created my subassembly with subassembly composer, it's difficult to change the sequency of the input/output parameters. Do we have an easy way to do that, Like moving?
View 4 Replies View RelatedAutoCAD Civil 3D :: Stripping Pavement Subassembly Applied To Only Fill Situations
Aug 22, 2013I am trying to apply the stripping pavement subassembly to only fill situation and even though my attachment point is only the fill case it applies it to both as shown. I am trying to get this information to provide a stripping volume for fill cases only.
View 4 Replies View RelatedAutoCAD Civil 3D :: Editing Subassembly Parameters
Aug 1, 2013I am using one assembly for this project and of course the existing surface does not always work well with one assembly so I have been using the corridor section editor to adjust each station individually. Attached is a picture of my first station, I started with a 3:1 fore slope (left side) and have changed it to a 2:1 slope. However, my ditch line elevation did not adjust and my parameter editor will not let me adjust the beginning elevation for the ditch line. I am curious as to what the simple solution is for this so my ditchline and back slope or slope to surface will be portrayed correctly.
View 4 Replies View RelatedAutoCAD Civil 3D :: Modification Of Subassembly Parameters In Corridors
Jun 25, 2013Is it possible to change the parameters of a subassembly - for example in an assembly comprising several subassemblies, can I change a parameter in Subassembly.LaneOutsideSuper, for example, to vary the Lane Width from 4m at CH90 to 3.25m at CH160m and keep it at 3.25m for the rest of the corridor.
I am new to Civil3D.
AutoCAD Civil 3D :: Set All Input Parameters And Create Subassembly In Drawing
Jan 12, 2014Is it possible to create subassembly from C3D Stock Subassemblies.dll programmatically using .NET? I need call procedure (Basic Lane for example), set all input parameters and create subassembly in drawing.
View 7 Replies View RelatedAutoCAD Civil 3D :: Subassembly - Generic Pavement Not Showing Its Parameters
Jan 15, 2013When i am creating a assembly, the sub assembly parameters for the generic pavement structure is not showing (such as the lane width or crossfall) Other sub-assemlies show these parameters. Is this a bug or is there a way i can turn this on.
I can change the parameters on the properties.
AutoCAD Civil 3D :: Typical Road Subassembly Carriageway Missing Parameters?
Feb 5, 2013I am just having some difficulties using the standard UKIE subassemblies where the carriageway is not showing the parameters correct. See the drawing attached. Eg:
1) The properties does not show the side correctly it has a zero value (not much of a issue as i can use the mirror command) (drawing subassembly)
2) I am unable to choose any superelevation on the subassembly . Now this is what causing me problems.
I have already re-installed the software from scratch and have also downladed the latest service pack.
AutoCAD Civil 3D :: How To Change Sequence Of Input / Output Parameter In Subassembly
Nov 28, 2013I hope Autodesk can have a easier way to edit the "input/output parameter" sequence. Today I found I cannot even delete a parameter. Whenever I want to delete a parameter, SAC just frozen.
View 2 Replies View RelatedAutoCAD Civil 3D :: Import Subassembly API For Custom Subassembly - Error?
Nov 12, 2013When I use ImportSubassembly API to import my subassembly created by Autodesk Subassembly Composer into my civil project, it reports error-"eFilerError".
the code like this:
atcFile = @"D:9f92eaa4ef514ac982518852e1169932.atc";
itemId = "ab660722-c69d-4ade-b373-0e9f99c94e55";
SubassemblyCollection subassemblyCollection = cDoc.SubassemblyCollection;
ObjectId subassemblyId = subassemblyCollection.ImportSubassembly("TestSubassembly", atcFile, itemId, this.doc.Editor.GetPoint("Select import subAssembly location").Value);
However, it is OK if to import subassembly provided by Cilvil 3D.
AutoCAD Civil 3D :: Subassembly Composer 2013 - Change Order Of Input / Output Parameter
Sep 24, 2013Is there a better an easier way to change the order of input/output parameters in the subassembly that i've created in SAC 2013 than the one where you have to go into a XML-file in the PKT archive file?
I've created my subassembly and I want to control the order of parameters to have a flow similar to the actual workflow.
AutoCAD Inventor :: Change A Subassembly Position
Jul 31, 2013I've tried this code here after setting the assembly flexible in the top level but it doesn't work.
ThisApplication.ActiveDocument.ComponentDefinition?.RepresentationsManager.PositionalRepresentations(?"Test").Activate
I will be pulling the subassemblies in as read-only parts and I would like to change the positional representation with code in the top level assembly.
AutoCAD Inventor :: How To Copy Subassembly To Create Similar But Different Subassembly
Sep 27, 2013(in Inventor Pro 2014,64 bit):
I've made an stairs assembly that contains adaptive parts that are all controlled by the assembly parameters.
Here is my assembly and the controlling parameters. The stringers on the side are made with the frame generator and use the "extend" feature to get the appropriate length, as driven by the parameters. The reason I used frame generator is so that I can easily change sizes of the stringers down the road, if needed. I chose to make the parts associative so I could control all of the parameters from within the assembly instead of opening each part separately.
My goal now is to be able to use this assembly (or something similar) as a template to create new sets of stairs, all to be placed in the same main assembly.
I attempted to duplicate all of the parts (append a "2" at the end of each file name and replace components in the new set of stairs with the 2nd version) but ran into problems with the two stringers. I can't figure out what to do to get the Frame00001 and Skeleton00001 to reassociate to Frame00002 and Skeleton00002. So any time I change my slope, the original stairs will end up trying to copy the new stringers instead of keeping the old ones.
how can I make this assembly reference a new frame, and secondly?
AutoCAD Civil 3D :: Missing SHX File Replacement Not Applied?
Sep 20, 2013So we receive a drawing from a partner and open it, and get this message, which is expected since FONTALT set to nothing
No problem, we click "Specify a replacement...", then get this dialog.
Where a replacement font is selected (it doesn't matter if we choose a TTF or SHX), and then the drawing continues to open. At this point we presume that any text with the style named "Style-WORKING" is going to be displayed using "Times New Roman".
But alas, open the STYLE dialog and.....surprise:
The font replacement never occurred. At this point if we choose a font and press Apply then REGEN the drawing, the text with the style "style-WORKING" shows up.
This sequence of events (except for the last step) occurred for a user and some important text in the drawing was overlooked because if was not being displayed. Even setting QTEXTMODE = 1 does not show the missing text rectangles.
So what is the point in telling the user that a font cannot be found and prompting him for a replacement font if it isn't going to be applied? (Yes, I know the sender should have used eTransmit, etc., but that isn't the point here)
AutoCAD Civil 3D :: How To Create Subassembly
Jul 24, 2013How can I create a subassembly..AND hot to add a Pave 3 option or another subbase depth.
View 9 Replies View RelatedAutoCAD Civil 3D :: Add Subassembly To Corridor?
Nov 18, 2013We are trying to edit a small portion of an existing corridor by adding a generic daylighting subassembly. The add subassembly tool in the Corridor Section editor works, but we get an error because the new sub doesn't have a target surface specified. how to add a target for a sub that is added after the corridor was created?
Civil 3D 2012 & 2013 & 2014
Toshiba Qosmio X505-Q890
2 x i7 - Q740 quad core CPU's
8GB of RAM
60GB SSD + 500GB HDD
NVidia GeForce GTS 360M - driver 8.17.13.0697
Win 7 Home Premium
AutoCAD Civil 3D :: Transition From One Subassembly To Other
Aug 28, 2012I need to transition to one subassebly to another. The first subassembly is at existing ground the other assembly is above ground. See following picture:
I need to transition from station 12+50 to 13+50. See following picture:
Here is a picture of the Corridor Properties:
Do I need to make a different subassembly in between the two stations? Is there a command I am not seeing that does it for me?
AutoCAD Civil 3D :: Where Is The Subassembly Composer
Aug 15, 2013I know this sounds like a really stupid question. Where is the subassembly composer? We have Civil3D 2013, and my understanding was that the subassembly composer was supposed to automatically install in 2013 as opposed to previous years when you had to download it from the Subscription Center.
C3D 2013
64-bit
AutoCAD Civil 3D :: Subassembly Always Is Placed At Right Side
Jul 30, 2013 my subassembly always is placed going to the right....
(The sub is avery basic sub.... 4 points .... 1 variable.. no targets.)
Civil 3D (2013)
GIMP :: Applied Filters Change Image To Grayscale?
May 23, 2013I'm new to GIMP. I've used Adobe Photoshop for years an years and no longer have access to the license. So I've been giving GIMP a test drive for a little while. I'm confused as to why when I apply a filter to my image or layer it changes the color to B/W or grayscale? I'm sure this is a relatively easy fix, but most filters I'm using don't have many options and I can't seem to apply the filter "as is". It always changes my whole graphic to grayscale. See "Before & After" attachments.
View 1 Replies View RelatedAutoCAD Civil 3D :: Express Grass On Subassembly?
Jan 6, 2013I want to know green area on subassembly.
I attach screenshot.
magenta color line is grass.
How can I express grass on subassembly?
AutoCAD Civil 3D :: Mill And Overlay Subassembly?
Mar 1, 2013I have a project where I am removing existing asphalt pavement and overlaying new pavement. I am changing the existing profile and cross-slope to tie-in to the existing profile and cross-slope. know of a mill and overlay subassembly that will allow you to tie the edge to a profile or feature line?
View 9 Replies View RelatedAutoCAD Civil 3D :: Assigning Material To A Subassembly
Mar 28, 2012Specifically to Subassembly.LinkWidthAndSlope / I only have Top or Datum options for that sub and if I assign either one in the code set it seems to overwrite all the other subassembly materials such as asphalt, curbs etc...with none set my realisic view has a gap between the back of curb and slope to existing.
Civil 3D 2012 SP1 on Win 7 64-bit SP1
Intel i7-2600kcpu @ 3.4ghz 16mb ram
ATI FirePro V4800
AutoCAD Civil 3D :: Subassembly Composer Superelevation
Jul 23, 2013How to use the superelevation. I read that I have to enter this command:
if((Side=Left)AND(SE.HasLeftLO), SE.LeftLO,
if((Side=Right)AND(SE.HasRightLO), SE.RightLO,
CType(slope,Double)))
but I don't know where, and I just want to create a simple assembly with a slope and delta X and having a lane outside superelevation for the both side.
AutoCAD Civil 3D :: Subassembly Line Colour
Oct 31, 2013Where do I change the colour of my assembly if I imported it from SAC?
View 1 Replies View RelatedAutoCAD Civil 3D :: Cannot Mirror Daylight Subassembly
Apr 26, 2012Why I can't mirror the Daylight Inside ROW Subassembly? For some reason I can only place it on the right side of my assembly and in the subassembly properties there is no option to flip it to the left. In the Modify Subassembly section when it's selected the mirror option is greyed out.
What I am trying to accomplish seems simple enough:
I have a utility easement in a drainage ditch that is 30' wide with a sewer line designed down the center, we need a very simple 10' access road on the uphill side of sewer line with 4:1 Cut/Fill slopes on either side when possible, however when the 4:1 won't catch within the easement I need it to daylight within.
At first glance the Daylight Inside ROW seems to be the appropriate subassembly for this instance but I can't get it on the left side of my road.Is there a way to set up this parameter with a different subassembly because I can get other subassemblies on the either side just fine, for example, the Cut Slope Layout Mode subaasembly works but when I build my corridor with it the slopes tie outside of the easement in several locations.
Civil 3D 2012
Windows 7 Service Pack 1
Intel Core i7-2600 CPU
16GB RAM
AutoCAD Civil 3D :: Tunnel In Subassembly Composer
Jul 13, 2012I am creating an subassembly for Tunnel in the subassembly composer.I am wondering how can i draw an ellipse with the minor and major radius data.I tried it with curve geometry but it doesn't seem to be accurate.best way to draw an ellipse with the major and minor axis parameter?
View 7 Replies View RelatedAutoCAD Civil 3D :: Subassembly Name Template Not Working
Sep 4, 2012For some reason my Subassembly Name Template is not being applied to my subassemblies. This happens in new drawings using the default Imperial Template that ships with the product.
I am showing the settings in a screen capture and the results when I apply them in a screen recording.
[URL]
Infrastructure Suite/C3D 2013, LDT 2004, Power Civil v8i SS1
WIN 7 64 PRO
HP Pavillion h8xt, i7 2600, 12 GB
RADEON 6450, 1 GB
AutoCAD Civil 3D :: Use Conditional Subassembly For Grading?
Jan 8, 2013I have an alignment running counter clockwise at the perimeter of a septic bed. I’m trying to use a conditional subassembly for the grading.From 0’ to 5’ of fill, grade to existing @ 3:1.Greater than 5” of fill, add a wall (no more than 4’ high) and grade to existing @ 3:1.
View 7 Replies View RelatedAutoCAD Civil 3D :: Autodesk Subassembly Composer
Dec 6, 2011I have a basic wall sub assembly that I created in SAC.Its looks fine in the SAC but when I import it into Civils it does not work...I have changed the extension from pkt to zip so that I can post it on here
View 5 Replies View RelatedAutoCAD Civil 3D :: Subassembly Composer Superelevation
Feb 13, 2013I am working with SAC , and cant understand how that superelevation works, how to make my models work in CIvil 3d in superelevations... how to build it properly in SAC. I would rly love to get .pkt file with working model as example , or at least get some usefull tip.
View 9 Replies View Related