AutoCAD Civil 3D :: Description Key Format Using Parameters
Feb 21, 2012
Is there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
View 4 Replies
ADVERTISEMENT
Jan 5, 2014
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies
View Related
Oct 30, 2013
I want to implement the following Key SAN10L....I have tried many codes to accomplish this: SAN*L, SAN##L, SAN?L. The 10 in the code represents a number from 1-99. The "L" is alphabetic. I want to use the survey database to create linework. I have everything setup, but cant get the code to work to generate the linework.
View 4 Replies
View Related
Nov 29, 2012
Just switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies
View Related
Sep 21, 2011
I would like my parameters to show in Description tab in BOM. Although I marked the for export I only see them in iprop.
How can use them in the create expression in BOM and add them to the part list later.Right now I dontsee them if I want to creat an expressin in the BOM
View 6 Replies
View Related
Dec 8, 2011
I have some parts with varies User Parameters that allow cusomization of part features. With numeric user paremeters we can check the export parameter box and then, in the description of the part we can refrence that parameter. For instance the description could be: =Width <Width>, Height <Height>, etc. Where it would desplay as Discription: width 22in, height 12".
We also have text User parameters. Is there a way to add these parameters to the description as well? They do not have the option of checking the export parameter box in the parameters table.
View 1 Replies
View Related
Oct 21, 2011
we are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies
View Related
Mar 14, 2012
Currently, when adding a parameter in the text dialog box, the parameter displays as a decimal (0.50). Is there a way to change this to display as fractional (1/2).
View 3 Replies
View Related
Aug 24, 2013
I have generated frame that has 100 members in it. Is there a quicker way of changing G_L unit to a mm so that I don't have to go into all 100 parts to change the custom properties? also I do not need unit string to be appear in my BOM.
View 2 Replies
View Related
Sep 27, 2013
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies
View Related
Apr 24, 2012
Is there a way to add descriptions to DS project folders after the fact?
View 9 Replies
View Related
Jun 19, 2013
I'm trying to make a description key set for our surveyors and am running into a problem with one description. For an iron rod they will use the description CH*IR 3/8 W/CAP. I cannot get the point to come in using the right point and label styles.
View 5 Replies
View Related
Mar 31, 2011
I know the default Description Key Sets can be set in the Properties. If I set the order in our template drawing this does not seem to hold when a new drawing is started with the template. How can I set the default description key for when a new dwg is created from the template?
View 8 Replies
View Related
May 5, 2012
For some reason in my base template for field work the "Disable Description Keys" option in Points Creation is set to "true"
How can make this default to "False" in my template. I've tried changing it and then saving the template again but it reverts to true all of the time. I have to select my points and do apply desc keys whenever I import points.
View 2 Replies
View Related
Jan 10, 2013
Civil 3D Newbie here.
I am making a directory full of the blocks we will use for the description key file to use. My understanding is that all of these blocks (manholes, hydrants, trees...etc) should be on layer "0" and of standard size. Manholes should be about 3' in diameter, transformer pads around 4' square....etc. Essentially, 1 = 1 true scale.
Is this true?
View 1 Replies
View Related
Jul 18, 2013
I currently use Leica Viva Smartworks for surveying and it captures the linework codes in its own field, so when I export my CSV file my Descrition comes on with the feature code but the linework code is another field. Is their a way that using the Format field in the description Key that I can get the Full description field to read something like "V-DOMW-PIPE B", which would pull the feature code from the raw descrition field and the begin line code from the Linework field.
View 5 Replies
View Related
Oct 10, 2012
I have to draft a lot of existing lots and easements from legal descriptions and recorded map documents. Does Civil 3D have an option to enter metes and bounds (bearing and distances into a table format and then "autodraft" from the entries in that table?
View 7 Replies
View Related
Mar 13, 2008
Is there a way to exclude points from a point group that have no description?
View 4 Replies
View Related
Jun 13, 2012
Creating a format to keep a number following a code.
My code is BCCD#
My format is DFL CC $+
My result now is:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL B CC (Ditch Flow Line and Type)
I am attempting to create a key that will create the following full description from the raw description:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL1 CC B (Ditch Flow Line and Type)
The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house. I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor
View 3 Replies
View Related
Nov 28, 2012
In LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
View 6 Replies
View Related
Apr 18, 2011
We use a lot of Null Structures but then give them different descriptions. More often than not when I give them a description and then get out of the drawing, the next time I get back in it says "Null Structure" again. How can I keep the description the way I want it?
I know that "the right way" would be to have specific structures made for each of these items, but that doesn't seem to be a priority at my company..
View 9 Replies
View Related
Apr 22, 2013
We are using the linework coding to process our figures and the survey .txt file provided to me uses codes to begin lines with "+" & "-". For example, driveways are coded + DR1 for begin and - DR1 to end the line. The linework process works fine, its when I go to display the point in the description keys that are causing me problems. All the points that are in between the begin and end points display to the appropriate style because they are coded as DR*. The begin and end do not display correctly as the + & - isn't being recognized in the description key. I tried many alternate ways such as *DR*, + DR*, - DR*, with nothing working.
Is there a different format I need to be using? There are way to many points to go thru to move the + & - behind the code.
View 7 Replies
View Related
Sep 4, 2013
How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies
View Related
Jan 4, 2013
I have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies
View Related
Apr 24, 2013
i need to put points on an alignment at each station. i've figured that part out. what i want is the station label to be the point description. i don't see a way to do this without editing each point which is way too time consuming.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 9 Replies
View Related
Dec 4, 2012
I just received a drawing with a bunch of points in it. One of the layer is called V-ROAD-CNTR-PNTS. Unfortunately, the point number, description, and elevation are all in that same layer. How do I keep just the elevation turned on but turn off the point description and number? When I turn off or freeze the layer V-ROAD-CNTR-PTNS, all three disappear. I just need the elevation showing.
Attached is an image of my screen.
View 5 Replies
View Related
Sep 10, 2012
How to set a default point description to match the point number. I need to match the point number and the point description as per below:
Point # = 1 - Description = 1Point # = 2 - Description = 2Point # = 3 - Description = 3and so on.
Is there a quick way to add this description once the points are already created?
Also, it seem I can't make the default style and label to work. I edited the Feature Setting on the Setting tab of the Toolspace and I made sure there's no child override. When I open the point creation menu, my default styles are there (grayed out), but when I create the points, they pick up another style and another label style.
View 9 Replies
View Related
Nov 14, 2013
How do you change the pressure pipe description ex. Ductile Iron to DIP? Or can you change it at all?
View 1 Replies
View Related
Aug 16, 2013
I am hoping to bring my spot shots labels in at a 45 degree angle. I have created this Desc Key Set. For some reason the points are still coming in like this.
I double checked my label style, it is set to object. I double checked the properties where it shows rotation it says property not set. I also tried to use the rotation set to parameter 1 and assigned the point a parameter 1 at 45 D with no success.
View 3 Replies
View Related
Oct 12, 2010
While generating a General Legal Description for Parcels xml report for a parcel with numerous tangent curves, reverse curves and compound curves, the report labels all of them as non-tangent.Also, I write my legal descriptions for curves by citing the bearing and distance OUT to the radius from the beginning of the curve, but the routine gives me the bearing and distance IN from the radius. It is using the code {curveStartDirection}.
Is there a different code I can use that would give me the opposite bearing? Is there some resource that lists all these codes for parcels?
View 9 Replies
View Related
Aug 10, 2012
I have created a custom point import with vb.net into Civil 3D 2012. I would like to be able to apply the description keys to the points after I import.
View 6 Replies
View Related
