AutoCAD Inventor :: Including User Parameters In Part Description?
Dec 8, 2011
I have some parts with varies User Parameters that allow cusomization of part features. With numeric user paremeters we can check the export parameter box and then, in the description of the part we can refrence that parameter. For instance the description could be: =Width <Width>, Height <Height>, etc. Where it would desplay as Discription: width 22in, height 12".
We also have text User parameters. Is there a way to add these parameters to the description as well? They do not have the option of checking the export parameter box in the parameters table.
View 1 Replies
ADVERTISEMENT
Jul 19, 2013
I made an assembly that adjusted to sized based on some key parameters. These key parameters are controlled by a form in the main assembly. The keys parameters actually adjust the skeleton file, which then drives the frame, then all the parts are adjusted.
after changing these parameters all necessary parts would adjust to size and keep the location constraints. Worked quite well.
The issue now is that, we adopted a new naming convention and this assembly requires all the part files to be renamed. I meticulously saved each part as their new name and then replaced each component in the main assembly. This worked to an extent. The problem that I am facing is that when I saved each part as there new name, the new part retained the linked parameters to the old part. Is there a way to change this link to the newly name skeleton file?
I looked into design assistant for this process as well, but the only changes I think available were to add a prefix or suffix. If worse comes to worse, I can remodel this project but, I am sure there has to be a way to alter this.
attached is a single part with those parameters in the image above.
View 2 Replies
View Related
May 21, 2012
I would like to have a rule that will add specific user parameters to a part file. These parameters need to be formatted so the width, depth and thickness will control the description of the part.
IE:
Width=4
Depth=2
Thickness=3/16
DESCRIPTION = TS <Width>X<Depth>X<Thickness>
I would like to format each parameter so that the:
Format=Fractional
Precision=1/16
Unit string=False
This is what I have so far:
oMyParameter=ThisApplication.ActiveDocument.ComponentDefinition.Parameters.UserParameters
oParameter=oMyParameter.AddByExpression("Width", "TOP_RAIL_WIDTH", UnitsTypeEnum.kInchLengthUnits)
oParameter.ExposedAsProperty=True
oParameter.Units="in"
[Code]...
The TOP_RAIL parameters are from a linked file.
View 9 Replies
View Related
Sep 21, 2011
I would like my parameters to show in Description tab in BOM. Although I marked the for export I only see them in iprop.
How can use them in the create expression in BOM and add them to the part list later.Right now I dontsee them if I want to creat an expressin in the BOM
View 6 Replies
View Related
Apr 23, 2012
I need to copy about 15 user parameters from 1 part to about 300 others. I used the DA to copy the iproperties but the user parameters are also needed.
View 2 Replies
View Related
Jul 18, 2005
Is there a way to create user parameter as TEXT Paramters does not accept the text paramaters . we always have tor create parameters as numbers.
View 9 Replies
View Related
Feb 25, 2013
Is it possible to add a user parameter into a general table in a drawing?
Example:
If I create a multi value text parameter called "Design", and give it two values "open" & "closed". Is there a way to add the chosen value into a general table on the drawing.
Autodesk Product Design Suite 2013
Win 7 Professional 32bit
Intel(R) Xeon(R) W3565 @ 3.2GHz QC
4.0 GB Ram
1GB Nvidia Quadro 2000
View 1 Replies
View Related
Aug 22, 2011
We are trying to add reference lines to the idw drawing for a sub-assembly. These lines represent centerlines of parts of the main assembly. The main assembly is not the reference file for the drawing. However, the required dimension setting the centerlines is a User Parameter in the sub-assembly. (The centerlines are represented by work planes in the sub-assembly file). Using iLogic, we were able to populate the User Parameter from the sub-assembly into the idw file. We can see it as a User Parameter in the idw file. However, when we go into sketch mode the User Parameter is not an option. In sketch mode, we pull a dimension between the two centerlines (d4). When you look at the parameters d4 does not exist so we cannot set d4 equal to our User Parameter (and we've looked there are no filters on). We need this dimension to be able to adjust as the length of the sub-assembly adjusts for different cases. Each case is unique and done on a job by job basis.
There are several places in our drawings where being able to place reference lines and set their relationship to the part would be very useful.
1. Why are the User Parameters not available for use in sketch mode on a drawing?
2. Why can the dimension IDs (ex. d4) not be seen by looking at the parameters?
3. alternative way of putting reference lines on a drawing?
View 4 Replies
View Related
Apr 10, 2013
I work with Inventor 2011.
It is possible to sort Parameters (user parameters) by code (simulating a click on column header) ?
View 3 Replies
View Related
Aug 3, 2011
How can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies
View Related
Feb 25, 2013
I have a large collection of parts that are controlled from an exteranl rule. I need to make slight changes to the external rule, but for the changes to be successful I need two extra user parameters to be added to each of the parts. There are hundreds of parts, so going in and adding the two parameters to each would take days.
Is there a simple way of getting the external rule to add the two parameters?
P.s. My VB skills are pretty limited, but my understanding of iLogic is pretty good.
View 2 Replies
View Related
Jul 11, 2012
I have a part with very irregular shape created by projecting geometry of other parts.
I wondered if there is any way of calculating area of this extrusion instead of dimensioning the sketch and creating equasions in user parameters?
View 9 Replies
View Related
May 1, 2013
I have an IPart with about 100 instances in it that is sheet metal. I created a user parameter for the gauge of the sheet metal relating to the thickness and that works fine in the ipart. My dilema is how to get the gauge to show up in my drawing in the general table. Pretty much I woud like the table to list part number, material and then have a column for the gauge of the steel related to the thickness in the Ipart table. I am using Inventor 2011 if that makes a difference.
View 2 Replies
View Related
Aug 30, 2013
I need import all new params, rules and forms from a new template to older parts. I'm trying to use an external rule to create a new iproperties and import params from xml file but I can't assign these parameters with these iproperties.
I attach the code.
View 3 Replies
View Related
Nov 21, 2012
I am trying to export a user parameter that is a text string to a custom I property. I am able to export other parameters to custom properties that are numarical values. I export check box is missing on the text user parameter.
Is there a way to acomplish this with I-logic?
View 5 Replies
View Related
Oct 3, 2012
Is it possible to spread text gathered from the part description on 2 lines? cause on 1 line is in this case to long.
Inventor 2013
View 3 Replies
View Related
Aug 31, 2011
I want to change 'mutil value select" to "custom value input" in ilogic user parameters. something like this:
if condition A then
multivalue.setlist("length", 1,2,3,4,5)
else
(users can enter any value they want, how can i remove the list first and set it to custom value input?)
View 2 Replies
View Related
Sep 5, 2013
Any example code of creating material from image file including the setting of parameters like seen in the materials dialog. I need to set the rotation angle along with the U/V tile and U/V offsets at the same time. This example shows part but does not do rotation.
[URL].....
I am trying to make the image fit a rotated face that is usually of the same proportions as the image.
View 1 Replies
View Related
Jul 30, 2012
I need to use parameters of a part in an assembly. How to do this? Do i need to define a rule? How is this done?
Can i do it without using an Excel sheet as a parameter source for both the assembly and the part? The target is to have inventor update an array of assets as soon as the width of a part is changed whether in Excel or in the Factory properties of the asset.
View 5 Replies
View Related
Oct 11, 2013
I'm new to Inventor. Lets say I create a part called Pipe.ipt. In it I specify the OD, Thk and Length of the pipe. If I then create an Assembly, and I want to use multiple instances of Pipe.ipt, but each instance has a different set of parameters (i.e. different OD, Thk and Length). How do I do this?
I see I can set up iPart, and I could set up tables with the OD and Thickness for various standard pipe sizes. But this doesn't address the length. How do I re-use the same Part in an assembly, but each part has it's own set of unique paramenters?
View 3 Replies
View Related
Feb 13, 2013
I have a part made where various parameters in it.
Now I place the part in a assy and from there i want the parameters to control the part.
I do this now by the same parameters from the part to add in the assy by typing the parameters manually in the assy.
Is there a way that you can define parameters retrieved from the part about the assy without retyping and therefore can make mistakes?
View 5 Replies
View Related
Feb 21, 2012
Is there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
View 4 Replies
View Related
Jul 13, 2012
How we can access the part parameters after hitting create iAssembly. do I need to make i parts first and then bring them to an assembly and make an iAssembly??
View 5 Replies
View Related
Mar 19, 2012
I have design tree like this:
Main Assembly
L Sub Assembly1
L Sub Assembly 2
L Sub Assembly 3
L part 1
in part i have a parameter name ("Panjang")... how to control "Panjang"?. I cannot access a part parameter in Sub-assembly.
[URL]
View 9 Replies
View Related
Nov 4, 2011
I am trying to control the parameters contained in a part that is not in my assembly. May sound odd, but I am using the multi body part modeling feature to create all of my bodies in a single part file, then making these components/sub assemblies, and pulling them into my assembly. However, I do not want to have the "control part" in my assembly, I just want it to drive the parts. I cannot figure out how to access these parameters without having the part included in the assembly...
View 7 Replies
View Related
Aug 7, 2011
I have the following problem. I design a simple part - an extruded base, so i have a parameter in this part that i can control the extrusion distance - i call this parameter D.
Then i create an assembly and place the part in it. How can i access the parameter D of the part from within the assembly?
I want to place multiple instances of this part in my assembly and control each parameter D of an instance using an excel worksheet that is linked with the assembly. How can i do it ?
My aim is to design a very simple manipulator. Each link has the same shape but a different length. I want to control each length from an excel worksheet and not from an ipart table. I want to have only one worksheet that controls the parameters of my assembly such as constraint angles , and link lengths.
View 5 Replies
View Related
Feb 18, 2013
I have a configurator assembly, which is controlled with an iLogic rule.
one of the parts is being changed in a lot of ways according to the different configurations. But in one of the Configurations the part must be suppressed, which works fine, however next time i run the rule i get an error message from all the other instances where it would change a parameter if the part was active.
I have tried adding if [the configuration that makes the part suppressed] = False then, in the beginning of the the code that fails, to simply prevent it from running, but it still makes an error.
and as you can see i have a lot of lines where the part normally would be configurated.
Error on Line 628 : Method arguments must be enclosed in parentheses.
Error on Line 629 : Method arguments must be enclosed in parentheses.
Error on Line 633 : Method arguments must be enclosed in parentheses.
Error on Line 634 : Method arguments must be enclosed in parentheses.
[code]........
I don't understand how to enclose the argument in parentheses.
View 9 Replies
View Related
Mar 28, 2013
In the recent past I've been putting textboxes (General Notes) on drawings, and using part-parameters in these textboxes to display the values stored in these parameters (see attached picture). Is there a way to automatically put a link to these parameters into the notes through the API / VBA so that these values update when the part changes? With the property obj_GeneralNote.Text it's only possible to add plain text.
Product Design Suite 2014
Inventor 2014, Vault 2014
HP Workstation Z220
Intel Xeon 3.4GHz
16GB RAM
Nvidia Quadro 4000
Windows 7 Professional (64bit)
View 1 Replies
View Related
Dec 7, 2012
I have 2 parameters in a part (a spring), "diameter" and "Length".
I change these parameters with iLogic to build several springs.
Is it possible to update the "Part Number" Each time I change the parameters "diameter" and "length"?
I want to get the following:
Mola_Ø-65_L-140
Where 65 is the parameter value and 140 is the length value.
I tried with the code below,
iProperties.Value ("Project", "Part Number") = "Spring_Ø-" Diameter "_L-" Length
but that returns: End of statement expected.
Autodesk Factory Design Suite Ultimate 2014
Autodesk Simulation Mechanical
Autodesk Simulation CFD
Windows 7
View 2 Replies
View Related
Oct 22, 2012
I created a basic part using Inventor and some how something created some parameters out of the blue. I know that I didn't create the parameters. The parameters got created automatically some how and I would like to know how this happened so I can do it again, because it would save a lot of time.
Here are some of the parameters that got created.
vParam_Title
vParam_Project
vParam_Description
I have included the file that this issue occurs in.
View 9 Replies
View Related
Jan 5, 2014
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies
View Related
