I would like my parameters to show in Description tab in BOM. Although I marked the for export I only see them in iprop.
How can use them in the create expression in BOM and add them to the part list later.Right now I dontsee them if I want to creat an expressin in the BOM
I have some parts with varies User Parameters that allow cusomization of part features. With numeric user paremeters we can check the export parameter box and then, in the description of the part we can refrence that parameter. For instance the description could be: =Width <Width>, Height <Height>, etc. Where it would desplay as Discription: width 22in, height 12".
We also have text User parameters. Is there a way to add these parameters to the description as well? They do not have the option of checking the export parameter box in the parameters table.
i use inventor 2012 and Vault Collaboration 2012.
for file naming format i use numbering scheme rule.
in the vault browser is eazy to show the description from each part, search by description etc.
but when ia want to select from inventor, for example i want to replace component from vault or add component from vault. i can't see this description.
my question is, how to show the description in the file browser from inventor?
Is there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
I set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedI am working in one assembly. in that assembly i created all the part with using i part & same part i called in to the assembly & created i assembly. while creating drawing i have facing problem to show the model parameters in to the assembly drawing table. How to link the model parameters in assembly parameters with using i assembly.
View 1 Replies View RelatedHow about setting parameters so these four columns show in a boom: Width ft., Width in., Length ft., Length in. Also, how about getting the bom to show surface square footage for coating purposes?
View 3 Replies View RelatedI am using parameters from a .ipt file to display dimensional information on a drawing file I have created (the fields colored red are the parameters it is reading). How do I get them to display as fractions instead of decimal? I want it to read 5"1/2 instead of 5.5", for instance. I have tried inputting them as fractions in the parameters dialog in the part file, but no luck, they still come out as decimal.
See attachment for reference.
When I add parameters to Excel, the new parameters do not show up in the linked parts. Even when starting
a new part and linking to the same excel file, the original parameters are all that are shown; not the new ones.
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies View RelatedI have an iPart that I have created parameters to perform some basic calcs so the values will show up on every member. The parameters are correct for the different member so it appears to be working correctly on the model side. For example I have a parameter called 'CutLength' that performs simple math functions. But when I make the table on the drawing and I include this parameter, I see the formula in the table instead of the value. Is there a way I can have it display the value instead of the equation?
View 2 Replies View RelatedHow to get a tangent bearing or radial bearing to show up in the legal description writer? All I can get are their opposites. Is there some code that I can add that will swap their direction (say NE for a SW)?
The convention out here (OR/WA) is to show a radial bearing (from the PC to the radius point) or a tangent bearing (into the beginning of a curve) for any non-tangent curves. So far, I haven't been able to figure out how to do this automatically.
Also, any good guide or list of variables for using the Parcel Reporting for legal descriptions in c3d? I really want to know what ALL the different pieces of data are that I can use in the legal writer, and how to manipulate them.
we are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies View RelatedIs there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
How do I set the animation graph in Axis FX to show only those parameters that have been modified ? Currently takes me a while to locate the parameters that I want to tweak.
View 5 Replies View RelatedI am sure this is extremely simple to do but I am missing something. I am wanting to set the Description of a part in the Iproperties using values from the parameters. For instance, if the part has a length value of 10 and a width value of 5 I want the Description to say: 10 x 5 Floor Sheet
I cannot figure out how to extract the parameter values and place them into the iproperties. Here is what I have tried: iProperties.Value("Project", "Description")=" =<Length> x <Width> Floor Sheet"... This gives me the following result in my description: x Floor Sheet
I have a custom iPart for a rectangular flat bar that's 100x10mm. The length is the custom field.
I would like the description in the BOM to append the length, e.g. 100x10 Flat bar-235mm. (This is so that I don't have to create a length column in the BOM just for this item).
I have tried 100x10 Flat bar - <length> but this gives an error.
I'm trying to insert a parts list into an assembly drawing but whenever I do all of the descriptive fields (format, zone, item, part number, description, etc, etc) are all in Russian. I've looked on the wiki and it notes that some of this is expected, I just don't think it's correct that all of the above are in a different language.
I've attached an example in Excel.
I have a question on Leader Text. Lets say I have a multiple sub-assys in a main assy. When I do the leader text on one of the sub-assys it will take the description from the individual part in the sub-assy. Is there a way I can make it put the assembly description rather than the part description?
View 9 Replies View Relatedis there a way to set the justification to left in the revision table justification? I've tried playing with the formats and I can't get it to do anything but be centred.
View 9 Replies View RelatedI am trying to get an "idw" or "dwg" title blocks "DESCRIPTION" property using an Inventor macro.
For example, if the description property on a part (ipt) file is "SIDE PLATE", how can I can the same result if the file extension is a "idw" or a "dwg"?
Say you model a custom nut or bolt with threads. Is it possible to put the thread designation in the description iproperty?
Something like:
=bolt, hex head, <dia> - <thread designation>
We would like to enforce that our designers save all Inventor files by the Part number only. This is not a problem when using Vault to open files as the interface can be customized to show the iProperty description field. The problem comes in for users who open files from the local drive before they have been added to Vault. There is no way for them to see the iProperty descrition for the files except if they hover over each file and wait for the tooltip to show which then shows a number of iProperties.
I found that I can add a Windows description column but by default it is blank. Is there anyway to get the iProperty description to synchronize with the windows description column?
I have a user that is creating frame work using custom members copied from the standard. We have edited the frame members to use the company's part numbers and description and everything works fine. The Parts List populates with the correct part number / stock number and description just fine. I have customized the Part List style to display the stock number if one is available so that it shows correctly.
The problem comes when changing the size of a frame member out. Frame Generator creates a new file for that member and the Parts List displays the correct Stock number but the description still shows the original size's description not the one associated to the new member's size.
I haven't tried it but I am sure that deleting the Parts List and reinserting might fix the problem but there are other lines in the Parts List that have Static overrides and the user would have to redo all that. Why does the PN/Stock Number update correctly but the Description does not?
Dell Precision T3500
Xeon 2.13GHz - Windows XP sp3
3GB RAM
nVidia Quadro FX 580
Erik J. Kurek
MCADAE, ICE, MICE
Manufacturing SME
Inventor 2013
Dell Precision WorkStation T3500
Bus Clock: 4800 megahertz
2.40 gigahertz Intel Xeon
8192 Megabytes Installed Memory
Windows 7 Professional (x64) Service Pack 1
NVIDIA Quadro FX 3700
I want to change the description of a bolt to be "M(bolt size) bolt. then add the length in another column. example M10 bolt.
I want to know if it is possible to do this using the Family Properties & changing the "Family Description" to something like M=<NND> BOLT. i have tried but had no luck as it only comes back with "M Bolt" & no diameter
Any other way to make it populate a BOM easily.
I'm trying to change the value in the description column through the formattedtext but the final result is not what is supposed to be, this is a part of my code.
Sub HoleTab()Set oDrwDoc = ThisApplication.ActiveDocumentDim oSheet As SheetDim i As IntegerSet oSheet = oDrwDoc.ActiveSheetDim oHoleTables As HoleTablesSet oHoleTables = oSheet.HoleTablesDim oTable As HoleTableDim oTableRow As HoleTableRowDim oTableRows
[Code] .......
Is it possible to spread text gathered from the part description on 2 lines? cause on 1 line is in this case to long.
Inventor 2013
Parts generated with the FG can be changed with the 'Change' option within the Frame Generator menu in the Design -tab on the ribbon.
However, when I change the size of the profile thru this menu all properties will be changed according to the settings of the table in the Content Center, except the Description property.
The Description column in the table is configured with the size of the profile and is mapped to 'project.description'.
I'm using Inventor 2013 SP1.1
Can I change the description that appears in the properties from content center files ? I want that appear Pa Allen or something like it, but the description is "Hexagon Socket Button Head Screw - Product grade A" from Content Center.
View 1 Replies View RelatedHow can you access user-defined parameters/function defined in the Parameters Manager dialog?
View 1 Replies View RelatedIm wondering if its possible to link either a constraint dimension to an action parameter or vice versa. Or using a linear parameter's value in an user parameter formula.
Its a 2D cylinder, for winding purposes we just have a rectangle, with a distance from the Y axis for radial.
Parametric dimensions: B=thickness, C=Lenght, R=radius
User parameter: A=Diameter (R*2), Mass in kg ((((pi*(c*b))*(A+B))*1.25)/1000)/1000
For the BOM, i need A, B, C & mass
For drawing references for peoples on the floor, to distinquish a cylinder from a stick, we put lines at the top and bottom of the cylinder, 1mm distance inbetween them.
I figured that making a linear parameter + stretch on the thickness to replace the B parametric dimension, allowed me to make an array of that line, with increments of 1mm as i stretch the cylinder. The thing is that the mass formula cant take the value of action parameters....
Other alternative is to keep the B parametric dimension, and add a linear parameter as above for the array. But then i have 2 places to adjust, and from a test i made, if i change the R dimension, the linear one does not follow. Its very frustrating.
What i was hoping autocad would be able to do is distance1 for array to be same as B dimension, but it does not allow me to do that, unless im missing something.