is there a way to set the justification to left in the revision table justification? I've tried playing with the formats and I can't get it to do anything but be centred.
View 9 RepliesI'm simply trying to delete the revision table if it exists on a drawing. I did find where you can't do anything with Rev Tags with the API, but what about the Actual Revision Table?
Trying to get this to work;
If iProperties.Value("Project", "Revision Number")>0Dim oRevTable as RevisionTableoRevTable = ActiveSheet.Sheet.RevisionTable.Item(1) oRevTable = nullRevisionTable
I 'd like to keep the old Revision table rows available , but off the sheet rather than delete all the rows & start from , let's say, Rev 10.Is this possible in 2012?
Inventor Suite 2013 Ultimate
I have never attempted any i-logic before and this may be running before I can walk, but I was wondering if this premise even sounded do-able. I would like to create a rule to set the last row of my revision table to all static values, and then add a row.
View 5 Replies View RelatedI tried to add a revision table by vba routie. useing fllowing code
Dim oRevStyle As RevisionTableStyle
Set oRevStyle = oDoc.StylesManager.RevisionTableStyles.Item("Revision Table_NEW")
Dim oRevTable As RevisionTable
Set oRevTable = oDoc.ActiveSheet.RevisionTables.Add2(oPoint, , , , , oRevStyle)
It adds revision table is not shown correct in the drawing. I have to manually select certain style in the drawing.
I try doc.update or view.update. it doesnt work.
Autodesk Inventor Professional 2014
Autodesk Product Design Suite Standard 2013
Microsoft Office 2007 & 2013
Windows 7 64bit
Synergis Adept 2013
Visual Studio Express 2010
way to set the default to be 0. When we release a drawing we have it as Rev 0, Released for Fab..
It's a pain having to change it from 1 to 0 for every idw.
Work ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit ~ i7 20gb
Nvidia Quadro FX 1700
Home ~ Inventor Ultimate 2013 SP1.1
Win 7 64bit i7 - 16gb
Nividia GeForce 9800 GT 1GB
240g Kingston HyperX SSD
is it possible to do an individual revision table for multiple sheet drawings. if you typed in description 'sheet 3 nut changed from m3 to m5......etc' then all the bunf would carry over to every sheet
View 1 Replies View RelatedJust created a 2nd drawing sheet in my IDW, and when i place a revision table it is missing most of the data that is shown on sheet 1. All i get are the description column entries, nothing else.
View 9 Replies View RelatedI have a situation where I just created brand new drawing templates and they have the revision block inthem already. The revision block that comes with Inventor. The vault is driving the revision in the titleblock and when the revision is placed in the revision block it too is linked to the vault. When the drawing is checked into the vault and the lifecycle is changed to "Released" and then back to "WIP" the revision updates. Both in the titleblock (which I want) and in the revision block which I don't want. Not only is it change the revision block, but the last revision posted as per the image below.
how do I change the property in the settings of the title block to not get it's revision from the vault or allow it to be manually driven?
I am trying to insert "Depth", "Counterbore", etc. Symbols in a revision table, but can't find ALT + XXXX for them. I did find the symbols in the Windows character map in AIGDT font group and they have Character codes but no ALT + codes? How to insert these symbols in a rev table?
View 1 Replies View RelatedIs there any way you can use the "Application option" "user name" in a revision table column?
The "APP'D" by "Author" is not very useful considering most changes are done by various people.
If this is not an option could it possibly be added?
Inventor 2013-
Is there a way to pin or standardize where a revision table is located in a drawing?
I have a title-block set up and would like a revision table either embedded or populated upon command, just above my title-block. It would also need to extend upward with additional revisions...
Inventor 2014 crashes when executing revision table edit. This started after installing windows 7 SP1(x64) and SQL server 2012 express (x64).
View 1 Replies View RelatedIs there a way in the description field of an Inventor hole table to have mixed units? Some hole sizes at fractions, some at 2 plc, and others at 3 places.
Inventor Pro 2013 or 14
a customer has a title block with a revision table ( standard vault revision table) add on top of it.
If you change the sheet size the revision table remains his position.
If found the way to reposition the table with a ilogic rule.:
'point afstand in cm
PointX=(ActiveSheet.Width/10)-13
PointY=5.5
'punt vanaf rechtonder gemeten in cm
[Code]....
This is working perfectly. But now the challange how to trigger this rule to run if you change the sheet size?
if tried:
trigger=Activesheet.size
or
to create a userparameter and added this line in my rule : Size=ActiveSheet.size, normaly is you change parameters it triggers the rule to rule. but both way didn't work.
Can event triggers from the API be used? Do i need the "Onchange" event? Any example for a ilogic rule?
I'm trying to change the value in the description column through the formattedtext but the final result is not what is supposed to be, this is a part of my code.
Sub HoleTab()Set oDrwDoc = ThisApplication.ActiveDocumentDim oSheet As SheetDim i As IntegerSet oSheet = oDrwDoc.ActiveSheetDim oHoleTables As HoleTablesSet oHoleTables = oSheet.HoleTablesDim oTable As HoleTableDim oTableRow As HoleTableRowDim oTableRows
[Code] .......
I have a rule in the .idw drawing template, that displays a dialog box asking for the size (A, B, C, D...). Once the size is selected, it displays the appropriate border and title block. There is a small & large title block, so an A or B size gets the small, and a C or larger gets the large. This works great.
My question is, how can I have the appropriately sized Revision Table (small or large), automatically ready for use, based on the drawing size? The (2) Revision Tables are defined in the Styles library.
Product Design Suite Ultimate 2014 | Vault Basic 2014 (SP1)
Dell Precision M6600 | Intel i7-2820QM - 16GB
nVIDIA Quadro 4000M | Windows 7/64 Pro
I am trying to create some new templates for 2013 and I'm trying to figure a way to get the model revision number to populate into the drawing's iproperty revision number so that they will match upon save. I'm trying to do this by creating an ilogic rule but I don't see a system property in the idw that will allow me to access the 3D model iprops. I am going to Event Trigger the rule to run Before Save. Is this possible?
On the drawing border I have created a formatted text box that is built as:
Type: Properties - Model
Property: Revision Number
It simply pulls the data from the models revision number and populates the text box. I need this same thing to happen but rather than populate into a text box I need it to populate into the drawings revision number iprop.
Boxx Technologies 4920 Xtreme - Win7 64bit
Intel Core i7 3960X @ 4.5 GHz - 64GB RAM
NVidia Quadro 4000 - Quadro 600 - Tesla C2075 (driver 307.45)
Product Design Suite 2014 (SP1) - Vault 2014 Pro SubRel1 - CFD Sim 2014 - Bunkspeed Pro 2012
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies View Relatedideas on Drawing Revision Table / Record on Title Blocks that they would share?We are re-designing our Title Blocks and I was wondering if there was a different or better way of doing this, besides a static block with attributes.
View 2 Replies View RelatedHow would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
The angle or radius are outside the table boundaries. I have used bend tables before and have not run into this. See screenshot. What I don't understand is that in the error dialog box the Thickness is correct the Radii are correct and the Angle is correct except it is showing a -90 degrees. Is that the problem? The negetive? Why is it showing a negative number. I can't change the way the part is formed. The problem seems to be with the lower left hand curl. It does go ahead and flatten it, but I don't trust the results when I have the three errors.
View 1 Replies View Relatedwe are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies View RelatedI have a part where I have placed a number of table driven iFeatures. These features generate parameters in the model that I can see in the parameter table. I am trying to find a way to have these iFeature parameters show up in the hole table in my drawing.
By 'exporting' the parameters, I have been able to get the values to show in notes and drawing view labels but I can't find a way to add them as a 'New Property' in my hole table.
I have three rules in our stamp to the revision date and revision number to fill in.
Along our project number should include the revision letter stand out with the latest date.
Now I would like to see if the date entered by the revision number and revision letter that the letter therefore become filled in along the project number.
If the next date is fill in with the letter, that letter must be completed along the project number The dates and letters are "Prompted Entry" or do i need other properties.
Can this be done with iLogic?
Youre drawings are as good as the symbols that compleet them.....
Is there a workaround to delete the last revision row with the edit icon (I've put in by mistake and would like to remove)According to Autodesk HELP:
"Note:The active row is always the most recently added row to the revision table. It is denoted by an edit icon and cannot be deleted."
We revise multiple items on a drawing at the same time. When we do this we add a number next to the revision letter to reference in the revision block. For example if we are on rev B and we revise 3 items we would need tags that say B1, B2, B3. We can edit the tags to reflect this, but I was wondering if there is any way to get the tags to do this automatically without using code.
View 2 Replies View RelatedI have a question about the revision tag. It's seam that we can not change the size of the balloon or Triangle. But we can use a user symbol. But we can make this choice only after placing the tag. see picture.
My question is : It is possible to make this choice in the stylelibrary ?
I'm trying to write a routine to work with a non vault revision table. I'm working with Vb .net & Inventor 2012. I am working with sheet scope tables.
From the inventor dialogue box there are two commands to add rows to the table.The insert row command. Which inserts a row in the table.
The add row command which inserts a row set the sheet revision property & sets the new row active.
I have tried to insert a new row with the following code & make it active but this does not work. Is is possible to create a new active row through the api? The new row gets added but cannot get the new row to become the active row.
dim new_row as RevisionTableRow
new_row = revtable.RevisionTableRows.AddCustom(table_length -blank_rows) ' This works as expected.
new_row.IsActiveRow = True ' this has no effect.
How to add in revision clouds in Inventor 2014? I want to draw in drwaings revision clouds.
View 9 Replies View RelatedIs there a way to add a revision row with I-logic?
Inventor 2013