We use a lot of Null Structures but then give them different descriptions. More often than not when I give them a description and then get out of the drawing, the next time I get back in it says "Null Structure" again. How can I keep the description the way I want it?
I know that "the right way" would be to have specific structures made for each of these items, but that doesn't seem to be a priority at my company..
One good thing about null structures is the way they display in 3D. They cover that gap in the pipe segments. Can I steal that shape?
I am currently using a simple cylinder for water pipe "joints" and turning it off like most people do I think.
Some of our structure styles for null structures are set to display as a block in profile. When we label these null structures in profile, the label dimension line extends to down to zero, way off the profile view. When I change the style to display the boundary of the null, the label pops back into place, but when I change the style back to a block, it will drop back to zero. I just upgraded to 2014 and this did not occur in 2010-2013. I've upgraded a drawing with existing profiles and also created a new pipe network and the results are the same. What changed in 2014 that would cause this?
View 4 Replies View Relatedwe are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies View RelatedWe use C3D 2012 (metric only) - We are attempting to customize our list of structures for Sanitary Sewers. The structure list shows sizes we do not use and we would like to modify them. However, when we try to select the "Inner Diameter" it displays a list of sizes that we can not seem to modify or add to.
I have looked at some of the XML files to try and modify or add new sizes (example: AeccStructConcentricCylinder_Metric.xml) , but they do not seem to be recognized even after I restart the program.
Here is what the file looks like:
<ColumnConstList desc="Inner Structure Diameter" dataType="float" unit="mm" name="SID" id="CCL1" visible="1" context="StructInnerDiameter" index="0">
<Item id="i0">1200.0000</Item>
<Item id="i1">1350.0000</Item>
<Item id="i2">1500.0000</Item>
<Item id="i3">1800.0000</Item>
<Item id="i4">2050.0000</Item>
<Item id="i5">2300.0000</Item>
<Item id="i6">2550.0000</Item>
I tried modifying the last line replacing 2550 with 3600.
I also tried adding a line <Item id="i7">3600.0000</Item>
I saved the XML file and restarted the program with nothing changing that I can see.
Looking for correct file(s) to edit so I can modify the LISTS that come up in the piping modules.
I have drawn a pipe network with multiple concentric sturctures. I need to make them all eccentric now. Is there an easy quick way to do this, or do I have to redraw all of them. When I go to the properties, I cannot find an option that allows me to change this.
View 2 Replies View RelatedI have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null?
View 2 Replies View RelatedI have set the migration defaults to my part list and the pipes come in as expected but all the structures come in as null? I even went as far as setting every option to my rect junction NF and they still come in as null? What did I miss?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
64 Bit Win7 OS
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies View RelatedI have a sanitary run manhole to manhole with null structures in between for lats. Each null is named "wye(lot#)" which I really do not need labeled anywhere but grants me the illusion of order and control. When I label the manhole (style uses text for each component) it references the inverts as from adjacent structure the nearest of which is the null. I need it to reference the upstream manhole as the from structure. BMP?
Another issue is the text for each component. There are times when I need to have the manhole label show "INV 8" IN 209.50 Int Drop (MH110)" or "INV 8" IN 208.75 w/ Slide (MH 108)". But as you know if I add to one I add to all. I found a post that discussed editing the xml to do this but my code either looked different than the example or I was looking at it cross eyed. I think if I could add an invert type column to the structure properties pipes tab the text for each component could add it to the label.Is there a better way people have been handling this?
Is there a way to add descriptions to DS project folders after the fact?
View 9 Replies View RelatedI want to implement the following Key SAN10L....I have tried many codes to accomplish this: SAN*L, SAN##L, SAN?L. The 10 in the code represents a number from 1-99. The "L" is alphabetic. I want to use the survey database to create linework. I have everything setup, but cant get the code to work to generate the linework.
View 4 Replies View RelatedI'm trying to make a description key set for our surveyors and am running into a problem with one description. For an iron rod they will use the description CH*IR 3/8 W/CAP. I cannot get the point to come in using the right point and label styles.
View 5 Replies View RelatedI know the default Description Key Sets can be set in the Properties. If I set the order in our template drawing this does not seem to hold when a new drawing is started with the template. How can I set the default description key for when a new dwg is created from the template?
View 8 Replies View RelatedFor some reason in my base template for field work the "Disable Description Keys" option in Points Creation is set to "true"
How can make this default to "False" in my template. I've tried changing it and then saving the template again but it reverts to true all of the time. I have to select my points and do apply desc keys whenever I import points.
Civil 3D Newbie here.
I am making a directory full of the blocks we will use for the description key file to use. My understanding is that all of these blocks (manholes, hydrants, trees...etc) should be on layer "0" and of standard size. Manholes should be about 3' in diameter, transformer pads around 4' square....etc. Essentially, 1 = 1 true scale.
Is this true?
I currently use Leica Viva Smartworks for surveying and it captures the linework codes in its own field, so when I export my CSV file my Descrition comes on with the feature code but the linework code is another field. Is their a way that using the Format field in the description Key that I can get the Full description field to read something like "V-DOMW-PIPE B", which would pull the feature code from the raw descrition field and the begin line code from the Linework field.
View 5 Replies View RelatedIs there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
I have to draft a lot of existing lots and easements from legal descriptions and recorded map documents. Does Civil 3D have an option to enter metes and bounds (bearing and distances into a table format and then "autodraft" from the entries in that table?
View 7 Replies View RelatedIs there a way to exclude points from a point group that have no description?
View 4 Replies View RelatedCreating a format to keep a number following a code.
My code is BCCD#
My format is DFL CC $+
My result now is:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL B CC (Ditch Flow Line and Type)
I am attempting to create a key that will create the following full description from the raw description:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL1 CC B (Ditch Flow Line and Type)
The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house. I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor
In LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
We are using the linework coding to process our figures and the survey .txt file provided to me uses codes to begin lines with "+" & "-". For example, driveways are coded + DR1 for begin and - DR1 to end the line. The linework process works fine, its when I go to display the point in the description keys that are causing me problems. All the points that are in between the begin and end points display to the appropriate style because they are coded as DR*. The begin and end do not display correctly as the + & - isn't being recognized in the description key. I tried many alternate ways such as *DR*, + DR*, - DR*, with nothing working.
Is there a different format I need to be using? There are way to many points to go thru to move the + & - behind the code.
How can I show the description (in this case, MUDSTONE) in a profile label? I've tried modifying the style but the description refuses to appear even though it is one of the available labels.
View 3 Replies View RelatedI have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies View Relatedi need to put points on an alignment at each station. i've figured that part out. what i want is the station label to be the point description. i don't see a way to do this without editing each point which is way too time consuming.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I just received a drawing with a bunch of points in it. One of the layer is called V-ROAD-CNTR-PNTS. Unfortunately, the point number, description, and elevation are all in that same layer. How do I keep just the elevation turned on but turn off the point description and number? When I turn off or freeze the layer V-ROAD-CNTR-PTNS, all three disappear. I just need the elevation showing.
Attached is an image of my screen.
How to set a default point description to match the point number. I need to match the point number and the point description as per below:
Point # = 1 - Description = 1Point # = 2 - Description = 2Point # = 3 - Description = 3and so on.
Is there a quick way to add this description once the points are already created?
Also, it seem I can't make the default style and label to work. I edited the Feature Setting on the Setting tab of the Toolspace and I made sure there's no child override. When I open the point creation menu, my default styles are there (grayed out), but when I create the points, they pick up another style and another label style.
How do you change the pressure pipe description ex. Ductile Iron to DIP? Or can you change it at all?
View 1 Replies View RelatedI set my des. key up like this: However this produces one single line of text with the description "span 0 dia. 0.0 Ht. 0" I want them on 3 separate lines, like the above picture.So I set up a label style With this component...So how I get the parameters $1 $2 $3 to go in the correct label component?
View 9 Replies View RelatedI am hoping to bring my spot shots labels in at a 45 degree angle. I have created this Desc Key Set. For some reason the points are still coming in like this.
I double checked my label style, it is set to object. I double checked the properties where it shows rotation it says property not set. I also tried to use the rotation set to parameter 1 and assigned the point a parameter 1 at 45 D with no success.