In LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
I am trying to get my points to displey the " mark from our descriptions. The description keys are set to $* and I have tried changing the Label Style from full description to raw description. I cannot get any information after the " mark from our field data. LDD used to put it in, but civil 3D truncates the information. I know I can do a find and replace in the .csv file, but would rather not have to continually edit the .csv file. Where the setting in civil 3D is to allow this to happen? I have even messed with the Point File Formats to no avail.
View 2 Replies View RelatedCivil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIs there a way to exclude points from a point group that have no description?
View 4 Replies View RelatedI have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies View RelatedI just received a drawing with a bunch of points in it. One of the layer is called V-ROAD-CNTR-PNTS. Unfortunately, the point number, description, and elevation are all in that same layer. How do I keep just the elevation turned on but turn off the point description and number? When I turn off or freeze the layer V-ROAD-CNTR-PTNS, all three disappear. I just need the elevation showing.
Attached is an image of my screen.
I am trying to set up our templete and I am having issues. I have set up description keys and such. When I import our survey data all comes in (ie blocks and linework). The problem is when I try to plot the block that are inserted on what appears to be the correct layer they do not plot out. When I freeze the point layer the block disappears as well. What setting am I missing that will create the blocks according to the description key and keep them on a separate layer like it did in Land Desktop but keep them dynamic? I am not sure if the subscription service covers.
View 9 Replies View RelatedIs there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
Civil 3D 2013 SP1 (64bit)
When importing an event, my point descriptions are cutoff at 16 characters.
Is there any setting to increase this?
If I have Microsoft Access installed on my computer, can one easily modify the table?
If you can modify the table using Access, can you define a default DB or would I have to redefine the string length within a table everytime I create a DB thru Civil 3D GUI?
How shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use.
How would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
C3D 2012 SP4
Win7 Pro
I want my survey symbols to come in on their own layers, separate from the point label. Lets use UPOL as an example: I have a point style UPOL*. It has assigned to it a block representing the utility pole.The size is set to drawing units, and sized to .1 inches.
The marker is on layer: V-NODE-POLE-SYMB
The label is on layer: V-NODE-POLE
The description key is as follows. UPOL*
Style: UPOL*
Point Label Style: Standard
Layer: V-NODE-POLE-SYMB
No other parameters have been choosen; scale parameter, fixed scale, or use drawing scale.
Have I done this correctly, to accomplish my task? I also noticed that I cannot turn the point label off by picking it. I have to turn the layer off in the layer manager.Should I use the description keys to scale the symbol, instead of the point style?
In an effort to firm up my understanding of how styles, point groups, description keys and layers collide, I followed the recommendations of an article. How groups/deskeys function together for layer visibility.
This process of Layer visibility that is supposed to make the program flexible makes it almost impossibly complicated.
I have been trying to export our 2012 DescKeys with Point Styles and Labels to 2011. How to do this without recreating them all.
View 2 Replies View RelatedJust switched to 2012 from 2010. When I try to edit the description format field in the properties window of a selected cogo point, I can't type in caps, it's all lower case. If I right click and edit the point, I can use capital letters, however. (running C3D 2012 sp4, Win7 64bit, 8GB)
View 2 Replies View Relatedwe are updating fron LDD 2004 to Civil 3D 2012 needles to say it a huge change. I've got my template almost done I'm just having one problem. With LDD any point that came in with a raw descripitoin not within the description key it would be placed in the current layer with point number, descripton and elevation. How do I make that happen with Civil3D do I have to change my default lable settings? When I import points with a raw description not within my description key it places the point on Layer 0 and only shows the node no point number.
View 2 Replies View RelatedI am importing a Gis (2007) shp file into C3D 2013 (Attaching Query and everything else) and everythings seems to be working. However, I get an elevation of 3 for all contours (Even before the Query a 3 feet elevation is depicted in the properties windows).
The only reason behind this, that I could think of, is that C3D is not reading after the 3.***** in the dbf file.
I think you will see from the pic my line mabel do not = the distance or property mesurement. all the labels are truncated so there is no auto rounding..
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
Is there any way to automatically fill in description in iProperties (.idw) from model description?
View 7 Replies View RelatedIs there a way to add descriptions to DS project folders after the fact?
View 9 Replies View RelatedI want to implement the following Key SAN10L....I have tried many codes to accomplish this: SAN*L, SAN##L, SAN?L. The 10 in the code represents a number from 1-99. The "L" is alphabetic. I want to use the survey database to create linework. I have everything setup, but cant get the code to work to generate the linework.
View 4 Replies View RelatedI'm trying to make a description key set for our surveyors and am running into a problem with one description. For an iron rod they will use the description CH*IR 3/8 W/CAP. I cannot get the point to come in using the right point and label styles.
View 5 Replies View RelatedI know the default Description Key Sets can be set in the Properties. If I set the order in our template drawing this does not seem to hold when a new drawing is started with the template. How can I set the default description key for when a new dwg is created from the template?
View 8 Replies View RelatedFor some reason in my base template for field work the "Disable Description Keys" option in Points Creation is set to "true"
How can make this default to "False" in my template. I've tried changing it and then saving the template again but it reverts to true all of the time. I have to select my points and do apply desc keys whenever I import points.
Civil 3D Newbie here.
I am making a directory full of the blocks we will use for the description key file to use. My understanding is that all of these blocks (manholes, hydrants, trees...etc) should be on layer "0" and of standard size. Manholes should be about 3' in diameter, transformer pads around 4' square....etc. Essentially, 1 = 1 true scale.
Is this true?
I currently use Leica Viva Smartworks for surveying and it captures the linework codes in its own field, so when I export my CSV file my Descrition comes on with the feature code but the linework code is another field. Is their a way that using the Format field in the description Key that I can get the Full description field to read something like "V-DOMW-PIPE B", which would pull the feature code from the raw descrition field and the begin line code from the Linework field.
View 5 Replies View RelatedIs there a way to change a RAW description such as EC12 +, or EC11 -, to say SWP12 +, SWP11 -
I'm not having much luck using the parameter settings. 1$
I tried Code = EC*, format=SWP1$
That didn't work... I got literally SWP1$ instead of SWP12 +
Is it a space thing? Do I have to rename all the descriptions to have a space before the parameter?
i.e. EC 12 +
I'm hoping this isn't the case and some form of wildcard can be use.
I have to draft a lot of existing lots and easements from legal descriptions and recorded map documents. Does Civil 3D have an option to enter metes and bounds (bearing and distances into a table format and then "autodraft" from the entries in that table?
View 7 Replies View RelatedCreating a format to keep a number following a code.
My code is BCCD#
My format is DFL CC $+
My result now is:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL B CC (Ditch Flow Line and Type)
I am attempting to create a key that will create the following full description from the raw description:
Raw Desc. BCCD1 B (Bottom of Concrete Ditch)
Full Desc. DFL1 CC B (Ditch Flow Line and Type)
The reason that I need to change the description is to comply with certain standard codes from an outside entity but I do not wish to change the filed coding that we use in house. I cannot seem to find a parameter that would allow me to keep the number behind the DFL descriptor
We use a lot of Null Structures but then give them different descriptions. More often than not when I give them a description and then get out of the drawing, the next time I get back in it says "Null Structure" again. How can I keep the description the way I want it?
I know that "the right way" would be to have specific structures made for each of these items, but that doesn't seem to be a priority at my company..
We are using the linework coding to process our figures and the survey .txt file provided to me uses codes to begin lines with "+" & "-". For example, driveways are coded + DR1 for begin and - DR1 to end the line. The linework process works fine, its when I go to display the point in the description keys that are causing me problems. All the points that are in between the begin and end points display to the appropriate style because they are coded as DR*. The begin and end do not display correctly as the + & - isn't being recognized in the description key. I tried many alternate ways such as *DR*, + DR*, - DR*, with nothing working.
Is there a different format I need to be using? There are way to many points to go thru to move the + & - behind the code.
