I am importing a Gis (2007) shp file into C3D 2013 (Attaching Query and everything else) and everythings seems to be working. However, I get an elevation of 3 for all contours (Even before the Query a 3 feet elevation is depicted in the properties windows).
The only reason behind this, that I could think of, is that C3D is not reading after the 3.***** in the dbf file.
In LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
I think you will see from the pic my line mabel do not = the distance or property mesurement. all the labels are truncated so there is no auto rounding..
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
i have lidar contour file that is a shape file, when i import this file using map with data connect i is imported with the correct elevation but is not useable for presentation only, when i import it with the map import command it does not retain the elevation on the polyline that it imports.
View 5 Replies View RelatedI am trying to create an elevation label that will give me the spot elevation followed by the letters "TC" and then on the line below subtract 4 inches from the elevation followed by the letters "BC". It's easy enogh to add the letters but the simple equation of elevation - 4 inches eludes me.
View 3 Replies View RelatedWhen I snap a point to an object, the point takes on the elevation of the object. I would rather the point's elevation stay as is.
-changing osnapz variable
-latest civil 3d service pack
A few weeks ago I did not have this problem but once my computer was switched to the company's global server and c3d was reinstalled the problem appeared. Furthermore (post switchover), when a colleage of mine prepared a simple test drawing with just a line and a point, he was able to snap to that line without the point changing elevation. When he sent that drawing to me and I tried snapping the point to the object, the same problem occured with the point taking the elevation of the line object. I suspect it is a system variable issue
i have some existing drainage pipe and structures in a base plan that i need to change the invert (which is the easy part) and the top elevation to the existing top elevation that does not meet the minimum presect in civil 3d 2012 is there a way to change these min. to match my exisitng elevation for example i have a catch basin invert is 15.45 top is 17.56 with a 18" rcp the cover will be less than 12" and i need to change this.
View 3 Replies View RelatedI am trying to get my points to displey the " mark from our descriptions. The description keys are set to $* and I have tried changing the Label Style from full description to raw description. I cannot get any information after the " mark from our field data. LDD used to put it in, but civil 3D truncates the information. I know I can do a find and replace in the .csv file, but would rather not have to continually edit the .csv file. Where the setting in civil 3D is to allow this to happen? I have even messed with the Point File Formats to no avail.
View 2 Replies View RelatedI am battling is bringing in LiDAR files from ArcGIS. I have tried TXT and ASC, and they both seem to only maintain the elevation to the nearest foot, as you can see in the attached image.
What is strange, is that when the file is brought back into GIS, this issue is a problem. Is there a setting for reducing the amount of units when importing data? The text file as I shared has data to the thousandth.
I have a bunch (hundreds, so manual input not an option) of X,Y points without elevation data that I would like to import into a DWG and assign an elevation that is based on an existing surface object. Is there a way to do this for a point file? The command for inserting individual points would be the "Create points - Surface > Random" but I don't see a way to do this in a batch type method where i have my PNE formatted input file to just move the points to sit on the existing surface.
View 2 Replies View RelatedWhen I try to open a large (98MG) tiff file in PhotoShop, I get the following message: "This file may be damaged (the file may be truncated or incomplete)." When I continue, the image appears with a blue line through it. I am, however, able to view the file using Microsoft Office Document Imaging, and the image is perfect.
View 3 Replies View RelatedI am using Civil3D 2010. I am trying to export the offset/elevation data from my cross sections to a text file or excel file so i can paste the info into another program. so far i've been labeling the offset/elevation info on the section and typing it into excel by hand.
View 9 Replies View RelatedThis might be simple, but what is the best way to hatch a part of a surface at say RL4.00 only so that any part of the surface below RL4.00 is hatched and the rest of the surface is not.
View 2 Replies View RelatedI used the Volume dashboard to cal volume so when I view the surface in object viewer or 3D I see my TIN volumes surface at zero elevation is this right? I think the reason is because they want us to see both surface so they are not on top of one to another.
View 5 Replies View RelatedAny way to label the elevation of an object where it is picked? For example, I'd like to be able to pick on the node of a feature line or 3D polyline (or any object really) and have a label placed that displays the elevation of the object at the point where it was picked. This could appear similar to the surface spot elevation label, but instead of getting it's elevation from a surface, it would come from the object where picked.
Alternatively, any way to create a label style, perhaps using the Note label, to display something like this? I don't even care if it is dynamic or not, static would be fine. However, I do need it to scale innovatively . Tool Pac has a feature that does this, but the label is just a polyline and text that is not annotative.
I turned the visibility of Elevation & Offset label off. How do I get it back. Not all just one spot.
View 1 Replies View RelatedIn the good old days I would create 3d polylines by elevation to create curb lines and driveway cuts. The command was in the terrain pull down. Has this feature been completely down away with?
View 3 Replies View RelatedSuperelevation curve criteria specifies axis of rotation but the assembly does not contain pivots.
okay i got this Before , just when i wanted to change in the Super Elevation Wizard , to outside lane rotation , i recently used AOR type , but yet no luck. also in my profile the super elevation the Cross slop Band : i always no matter what a rotation about center line.
I have a surface profile 1 and a corresponding water level profile 1 of a flood plain. Now I get an updated surface profile 2 and the engineer ask me to ajust the water level according to the difference of surface level 1 and 2.
How can I add a irregular distance (water depth) to surface profile 1?
I conducted 2 surveys on different days and somehow the second survey was off by exactly 0.9 (don't ask because I do not know). With the temperatures being -10C with a very high windchill. I said I would worry about it after the fact once I put it into CAD.
So I am on to Civil3D 2014. I imported the 2 .FBK files and was wondering how to do an elevation drop of 0.900m for just the one survey quickly.
I'm getting a zero elevation for the surface I create when I compare surfaces to get volumes. What am I missing?
View 9 Replies View RelatedI have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
When working in a drawing with a surface referenced there is usually a flag attached to the cursor that reveals the surface and the elevation of the spot the cursor is hovering over; mine has disappeared.
View 8 Replies View RelatedI have a drawing that someone else created that has a spot elevation label for a surface. It labels the surface (PAD) then automatically subtracts a set distance for another elevation (GFE) and adds a set distance for another elevation (FFE). After doing some research, it looks like it was created with an expression?
I have two questions:
First, where to go to get a better understadning of this? I'm not familiar with expressions.
Second, where can I find the expression in drawing to make an edit to the set distances. I can remove the GFE/FFE as they are separate components in the label style, but I don't see where to modify the distance it adds or subtracts.
I have created a surface, when I hover over a contour on it I used to get name,style, layer, elevation. Now I get them all except elevation, I didn't change anything (not on purpose at least) in my drawings.
View 6 Replies View RelatedI have a few vary large stockpile that i need to get volumes of the stockpile at 1 meter intervals- is there a quick way of doing this, other then finding the area of each elevation and calculating the volumes.
View 8 Replies View RelatedAny way to get an expression that calculated the difference between two points and pick up the results as point elevation.
View 5 Replies View RelatedI've tried to create a surface analysis by using a point group reading xdata to set the elevations and when I set my surface properties to display the elevation shades it will only allow me to set the range to 5 or less. All of the other analysis settings for direction, slope, and slope arrows allow me to input the nuber of ranges I want, but I need the elevation analysis.
View 5 Replies View RelatedIs there a way to show the MES Top Elevation as blank or a dash? It would be great if I could make an expression but without the use of text strings in the expression editor, I don't know how to accomplish this without using wipe out boxes over the elevations.
View 2 Replies View RelatedI'm working on a runway in Civil 3D 2011. I want to transition cross slopes along the runway. i.e. 1.5% for sta 1+00 to 10+00 and then transition into 1.0%. I thought super elevation would be the best way to do this (I dont want any actual super elevation, just transitions in cross slope). When I select the alignment and "Calculate/Edit Superelevation" i get the following message in the commanding line:
"_AeccCalcEditSuperelevation No superelevation data has been calculated for the selected reference alignment." It does not bring up the wizard.
My runway alignment doesn't have any curves and I'm thinking that's the problem. Is is possible to create super elevation without curves?
I am using Civil 3d 2013 and I am trying to calculate the superelevation information in which the curve will max at 2%. Is there a way in which the superelevation can be calculated using the superelevation wizard in which a 2% SE is the max? So far it will only let me use the SE for 4% local roads and I have to edit it using the SE layout.
View 3 Replies View Related