AutoCAD Civil 3D :: Surface Elevation Labels
Jun 26, 2013
I have a drawing that someone else created that has a spot elevation label for a surface. It labels the surface (PAD) then automatically subtracts a set distance for another elevation (GFE) and adds a set distance for another elevation (FFE). After doing some research, it looks like it was created with an expression?
I have two questions:
First, where to go to get a better understadning of this? I'm not familiar with expressions.
Second, where can I find the expression in drawing to make an edit to the set distances. I can remove the GFE/FFE as they are separate components in the label style, but I don't see where to modify the distance it adds or subtracts.
View 1 Replies
ADVERTISEMENT
May 3, 2012
We work with Hydro graphic surveys that have large numbers of points. We would like to be able to display girded spot heights colored to represent the elevation. (Similar to elevation banding)
I have created a surface and then created surface elevation points on a grid with spacing of 15m. I have tried looking at setting up a style that will adjust the color depending on the elevation ie 0 to -1 = red but haven't made any progress.
View 2 Replies
View Related
Oct 30, 2012
I have a project I designed and grading plan is almost done. My proposed surface lables read as 1256.50. How can I get them to read just 56.50? I have a FG surface I created and am labeling using surface elevations. I am running out of room and need to free up some space. I don't want do drop my surface 1200'.
View 3 Replies
View Related
Oct 31, 2011
Is there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies
View Related
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
Apr 4, 2012
Is there any way to change the referenced surface on a Surface Elevation Label. I can see the surface in the properties but cannot change it.
C3D 2011
View 1 Replies
View Related
Oct 4, 2011
I have several hundred cross sections for a surface that I need to label the major section breaks. Civil 3D gives the option of weeding based on distance, but I want to label only the major grade breaks (i.e. more than 1%). Is this possible, or is the only option manually labeling the section?
View 2 Replies
View Related
Mar 21, 2012
Attached is a pdf showing the issue I'm having with the way elevations labels appear on the outside edges of cross sections.
Issue #1:
I added the dimension to show that the bottom of the cross section is actually at 97.5 but is labeled as 98
Issue #2:
I would prefer the bottom of the cross section to be at an even elevation (98 not 97.5)
View 2 Replies
View Related
Jul 2, 2013
Why not show the labels in sections?
View 2 Replies
View Related
May 9, 2013
Is there a way to remove the extra (In) and (out) invert elevation from my labels? If the IN or OUT (I.E.) is the same there is no need to label them twice. So, can I remove them? If you can remove them, how do you do it?
This is what I have
NEW CATCH BASIN A-11
TOP=427.30
I.E.(IN)=421.60
I.E.(IN)=421.60
I.E.(OUT)=421.60
View 3 Replies
View Related
Feb 22, 2013
I created several cross sections for a roadway design utilizing sample lines. I created multiple sample lines along the CL alignment and inserted the cross sections without any errors. The peculiar part is when I try to inquiry or label any cross section, nothing happens. Using the inquiry tool, I get an message that reads "Warning: Specified point is outside the section view. Try Again." If you see the attached PDF, you'll notice that the point I selected is dead center of the particular cross section in question. When I attempt to use labels to mark elevations, in the command line, it repeats "Pick a Point" but does not insert a label.
I created other cross sections in the same fashion and do not have this issue.
View 3 Replies
View Related
Dec 7, 2012
Is it possible to rotate the point labels when working with point files from an elevation Survey in Ciivil 3D? When activating the labels visibility they are horizontal, but when I rotate the drawing to a side view I am can´t see them.
So far I was working with Autocad (importing a dxf). Is there a way to rotate at the same time all the points labels, wich in this case are just text items?
View 4 Replies
View Related
May 21, 2012
Trying to change the position of the "elevation" labels on the horizontal axis. They come default as being inside the profile and i want them shown on the outside of the profile box.
View 3 Replies
View Related
Aug 28, 2012
i created section view as in pic1. In Bands, Existing surface elevation labels at existing surface grade breaks, top of road elevation labels at top grade breaks, datum is the same. Can i add existing surface elevation labels at top of road grade breaks? (pic2)
View 7 Replies
View Related
May 22, 2013
I used the Volume dashboard to cal volume so when I view the surface in object viewer or 3D I see my TIN volumes surface at zero elevation is this right? I think the reason is because they want us to see both surface so they are not on top of one to another.
View 5 Replies
View Related
Sep 27, 2013
I'm getting a zero elevation for the surface I create when I compare surfaces to get volumes. What am I missing?
View 9 Replies
View Related
Apr 25, 2013
I have created a surface, when I hover over a contour on it I used to get name,style, layer, elevation. Now I get them all except elevation, I didn't change anything (not on purpose at least) in my drawings.
View 6 Replies
View Related
Feb 8, 2006
I've tried to create a surface analysis by using a point group reading xdata to set the elevations and when I set my surface properties to display the elevation shades it will only allow me to set the range to 5 or less. All of the other analysis settings for direction, slope, and slope arrows allow me to input the nuber of ranges I want, but I need the elevation analysis.
View 5 Replies
View Related
Apr 17, 2012
In the previous C3D 2012 version I was able to set surface transparency just setting it on a layer with defined transparency. Example: I set my "existing ground" surface to a created "EG" layer (example name) and set transparency layer to 50% (example, again) and it WORKS! My surface become transparent...
But now, in the C3D 2013, I can't get the same results... my surface is not getting transparent. I already tried to turn off/on hardware acceleration and adaptive degradation and show/hide transparency.
More details: I can get transparency on points, triangles, contours etc... but not on elevation, and this is my priority.
Autocad Civil 3D 2013 - Infrastructure Design Suite
Windows 7 64 i7 860 @2.80GHz 8GB Ram Quadro 2000D
View 9 Replies
View Related
Aug 16, 2013
I have a question about pipeline networks.
I have a civil3d pipe network that has modeled by my co-worker before.
Now I want to put that pipe network on new surface and get rim elevation from surface automatically and also after stretch it can update rim elv based on that surface.
View 3 Replies
View Related
Feb 18, 2013
I got this plan from a third person and, the point from the survey have the property " bloc ". In their attribute property, I can see the elevation value. but in the z of the actual bloc, it shows zero. I would like to tell C3D to use the attribute elevation for his actual Z in the drawing. How can I achieve this ?
View 6 Replies
View Related
Nov 15, 2013
is it possible to export elevations from a surface at a given interval? i can easily export all the data i used to build the surface, but now I am wondering if its possible to export/extract the surface to a CSV or TXT file with a position and elevations, say, every 5 feet?
View 3 Replies
View Related
Jun 24, 2013
I have a surface with all sorts of heights, and want to add color to different heights. Getting the color there is not that difficult, but how do I swap them around? i.e. red is 'low ground' and blue is 'high ground'. In Holland we use it the other way around though, so blue should be low ground and red high ground.
Where exactly do I change this? I've tried it in the surface style tab, surface properties tab, analysis tab, and some others, but no success so far.
View 9 Replies
View Related
Jun 19, 2012
I am using Civil 3d 2012 and an trying to apply elevation banding (one color) to a surface that is completely flat. Everything seems to be in order but nothing shows up. If I add another point file to it that has a variety of elevations then the elevation bands show up, if i remove it it disappears again. I can view the boundary and get elevation readings when I mouse over the surface.
View 6 Replies
View Related
Sep 27, 2013
I just used 8 points to create a surface - see the right-hand-side of the 1st attached file.
I went to Settings => Surface => Label Style => Spot Elevation =>Elevation Only => Label Style Composer - Elevation Only => Text Contents: <[Surface Elevation(Uft[P2[RN]AP[SN|OF]>P<[Description(CP) - see the 2nd attached file..
I went to Prospector => Surface => Surface1 => Definition and I did not see any place for editing Elevation - see the left-hand-side of the 1st attached file.
How to make the Elevation and my stuff in Description show up in the DWG.
View 8 Replies
View Related
Feb 27, 2012
I just got a topographic map of some land we plan to develope, and would like to work out some preliminary earthmoving analysis.
I would like to sample that surface at very specific locations -- I could produce the required points in PNE format.
What I want is to find the way to: (1) import those points, (2) sample elevation from the surface at those locations, and (3) export the 3D poitns in PNEZ format.
View 2 Replies
View Related
Jun 6, 2012
Site layout has moved and rotated a little. Have spot elevation labels in my sheet but unable to use align command. Align command is able to be used but only moves labels rather than move and rotate.
View 9 Replies
View Related
Mar 29, 2012
So I have an existing grade surface and I am laying out a number of different site designs. I've got all my surfaces from those site designs on different layers each displayed in a different layout. I need to label existing contours on each layout in different places. I've setup additional contour label styles (two for each design, major, and minor) and layers (two for each design, major, and minor). However, when I add labels to my existing surface, they come in on the right layer, but whenever I freeze any of the many layers my contour labels are on, they all turn off. The only workaround I can figure is to make copies of my existing surface for each design option and label each independantly. However, this is inacceptable as far as data management goes, since my one file will be hundreds of megs with all those surfaces.
Windows 7 x 64 bit
NVidia Quadro 2000 Dual Monitor
6.00 GB RAM
Intel Xeon W3550 @ 3.07 GHz
Civil 3D 2013 SP 2, Civil 3D 2012 SP2, Civil 3D 2011 V3, Civil 3D 2010 V3
View 8 Replies
View Related
Jun 17, 2009
I need write Cut and Fill Labels on Volume surface in each 10x10 meters. Civil 3D can write Spot Levels on grid, but I need write Cut
and Fill values in grid area. Using Surface >Utilities>Bounded volumes I can get the values on selected closed polygon, but write to all is very long work. How to do write Cut and Fill labels on grid.
View 7 Replies
View Related
May 13, 2013
I have surface percent slopes labels in my drawing. I want to change the current style precision to only one decimal not three and I don't want to see the negative in front of the slope value.
View 1 Replies
View Related
May 26, 2010
I'm just trying to figure out how to label my surface with slope values in Degrees. The existing options are rise/run, percent...
View 4 Replies
View Related
