I think you will see from the pic my line mabel do not = the distance or property mesurement. all the labels are truncated so there is no auto rounding..
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
We sre doing 3 line profiles for a road and the left and right curb should be .13' lower than the centerline elevation. In many cases we are getting .14' or sometimes more or less. We tried resampling the cooridor with a tighter interval but still the same results.
View 9 Replies View RelatedI am importing a Gis (2007) shp file into C3D 2013 (Attaching Query and everything else) and everythings seems to be working. However, I get an elevation of 3 for all contours (Even before the Query a 3 feet elevation is depicted in the properties windows).
The only reason behind this, that I could think of, is that C3D is not reading after the 3.***** in the dbf file.
In LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
I am trying to get my points to displey the " mark from our descriptions. The description keys are set to $* and I have tried changing the Label Style from full description to raw description. I cannot get any information after the " mark from our field data. LDD used to put it in, but civil 3D truncates the information. I know I can do a find and replace in the .csv file, but would rather not have to continually edit the .csv file. Where the setting in civil 3D is to allow this to happen? I have even messed with the Point File Formats to no avail.
View 2 Replies View RelatedI am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
How can I evaluate and expresion to the nearest tenth?
Civil 3D 2012 & 2013
HP Z210 Workstation
Intel Xeon CPU E31240 @ 3.30 Hz
12 GB Ram
Note: Its all Resistentialism, so keep calm and carry on
64 Bit Win7 OS
I have 2 surfaces that I am sampling and have the bands depicted in the attached. I would like to have all bands with 1 digit of precision and the values in the Cover Depth band add up. The Cover Depth is supposed to be subtracting the two but is often off by one digit. I have tried changing the rounding options in C3D but there is always disagreement between the data in the bands.
I tried searching for this issue to no avail. Perhaps I need to have an expression to do the rounding is what one case eluded to. Seems that C3D may use a type of rounding that rounds to the nearest even number?
I have a problem where the Inverse Report is returning values of "N 89-59-60 E" instead of "N 90-0-0 E".
I have attached a screenshot. A simple rectangular parcel rotated 1 degree.
The head of our survey department is going nuts trying to check things.
Civil 3D 2011 (SP1)
Windows 7 (32 bit)
How do you set an object's annotation, say a line, to display a line's angle or bearing precision to the nearest 20th second.
Kinda like this for decimals:
0.000
0.00
0.0
But for degrees minutes seconds.
Also, I will require the seconds to hide if the nearest 20th second was a 00. I also need a leading zero for minutes if the minutes was under 10 minutes.
My workflow consists of building a point cloud object from a LAS file, filtering it for ground data, and and building a surface object with it. Breaklines are inserted into a surface object, and then the surface object is exported to a DEM file to be used in a GIS application. The problem is that Civil 3D rounds the elevations to 1-foot intervals, even when the file is structurally floating point. How to override this rounding to get floating point values that reflects the original data?
View 7 Replies View RelatedI am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedWhen generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies View RelatedI opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies View RelatedI need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedI worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
If you're displaying the part number in a balloon, is there any way to truncate what is shown?
e.g., I have a part number "abc12xyz89", and want the ballon to display only "xyz89".
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View RelatedI have an existing topic dwg and it has points from the survey crew shots in the dwg, I need to label this points. I want to extract the TC and Gutter information from the points by picking the the points I want to label.
View 1 Replies View RelatedI would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies View RelatedMy labels are only displaying as tags. How do I get them to display as bearing and distance again?
View 3 Replies View Related