AutoCAD Civil 3D :: Create Labels That Are Non-associative?
Jun 11, 2013Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
ADVERTISEMENT
AutoCAD Civil 3D :: Create Labels For Specific Contours
Jan 11, 2013 I have a drawing with contours every 1m and according to the area that I have to display in my layouts I have to display contours either 2m, 5m or 10m.
How is possible to create labels for only this elevations and if it is possible, create several labels along one of these contour with specific interval.
AutoCAD Civil 3D :: Create Labels With Dynamic Blocks?
Nov 21, 2013I am labeling my pipe network structures and I was trying to create a label with a dynamic block. I want to have an octagon with text that I can change. So when I label INLET 1 I will have the information I need plus a symbol that corresponds to it.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
AutoCAD Civil 3D :: Why Does Program Create Multiple Labels For Each Marker Or Link
Jun 17, 2013C3D 2012 SP3..I want to label the subassembly I have created. It is easy enough to create the label style and apply it through the code set styles. I want to drag the labels for pavement depth, creating a leadered situation. Why does the program create multiple labels for each marker or link? Can this be limited to one lable for the marker and link?
View 2 Replies View RelatedAutoCAD Inventor :: Set The Drawing View To Be Associative Or Non-associative By Default?
Mar 4, 2013Is there a way to set the drawing view to be associative or non-associative by default in my .idw template?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
AutoCAD Civil 3D :: Add Elevation Labels At Any Position On A Feature Line Without Having To Create A Surface?
Oct 31, 2011Is there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies View RelatedAutoCAD 2010 :: Set Associative Dimensions To Be Non-associative?
Aug 20, 2009Is there a way to set associative dimensions to be non-associative without exploding them?
I have a large drawing with a bucket load of dimensions. I did not realise until too late that my dimensions styles were set to be associative by default. Now whenever I alter the drawing such as breaking a polyline that a dimension is associated to the dimension sometimes goes haywire. If I select affected dimensions I can see in the properties window that the dimension is associative but the field is greyed out and I can't alter it.
Is there a global or per-object way to change this association? Exploding is not an option.
AutoCad :: Differences Between Associative And Non-associative Hatch?
May 5, 2013What is the concept and differences between associative and non associative hatch, dimension etc?
View 7 Replies View RelatedAutoCAD Civil 3D :: Surface Slope Labels - Rise:Run Custom Labels?
Dec 27, 2013I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
AutoCAD Civil 3D :: Why Does Not Consider Curve Labels As A Part Of Alignment Labels
May 3, 2013I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
AutoCAD Inventor :: Create Non-associative Solid Base Feature In Second Part
Sep 19, 2013“Associative body copy API Sample” 2013 API help.
The above code in the API help shows how to do an associative or a non-associative copy in an assembly of one part into another part. ..BUT the non-associative copy does not always work correctly....
I have been testing this sample code and notice the following limitations with the lower part entitled “Create a non-associative solid base feature in the second part”...
The code uses the proxy body for the source object but it does not use the proxybody for the target object and therefore the relative positioning is wrong for the nonparametricbasefeature when it is created in the target object if the real target body is in a different place than the targetbodyproxy (e.g. it has been rotated/moved in assembly space).
I notice that if you perform this manually using the “copy object” button the relative positioning is maintained correctly even if both target and source objects have been rotated/moved in the assembly...
AutoCad :: Associative Leaders Becoming Non-associative?
Jul 20, 2012We have been having a problem with our leaders for the last few weeks. We are running Acad2009LT and Acad2009 full versions. Our leaders are becoming non-associative. I made a drawing yesterday and was the only one editing the drawing. I made some leaders with text. I know they were working fine because I had to move some text and the leaders went with it. This morning when I opened the drawing. Some, not all, of the leaders that I made yesterday have become non-associative. I made some new leaders and they are working properly. Other people in the office have been having the same issue. Nothing has changed on our systems. We have been using the same program since 2009.
View 6 Replies View RelatedAutoCAD Civil 3D :: Where Is Associative Array Ribbon Tab
Feb 2, 2013Where is the Associative Array Ribbon Tab? I want to put into my Contextual Tab States for when I select my arrays.
C3D 2014 SP1
W7x64; i7 8gb; Radeon HD 5700
AutoCAD Civil 3D :: Associative Network Evaluation Error?
Jan 9, 2014I am working on a project and just about to issue set out data and am getting an Associative Network Evaluation Error.
How to track down which objects are affected and are not updating?
AutoCAD Civil 3D :: Can't Get Scale Of Labels Right
Sep 12, 2012I am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies View RelatedAutoCAD Civil 3D :: Contour Labels 2
Sep 20, 2011When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
AutoCAD Civil 3D :: IF Statements In Labels
Jan 12, 2013I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
AutoCAD Civil 3D :: Fields Within Labels
Oct 4, 2012Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies View RelatedAutoCAD Civil 3D :: Labels Are Not Rebuilding
Jun 4, 2013I opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies View RelatedAutoCAD Civil 3D :: Intersection Labels With POT POC
Oct 25, 2010I need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies View RelatedAutoCAD Civil 3D :: Clearing Tag Labels
Oct 17, 2012I worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
AutoCAD Civil 3D :: Labels Not Next To Markers?
Aug 15, 2013I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
AutoCAD Civil 3D :: Contour Labels Will Not Add
Dec 16, 2013I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
AutoCAD Civil 3D :: Disappearing Profile Labels?
Jul 25, 2012acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
AutoCAD Civil 3D :: Parcel Labels In Layouts
Apr 4, 2013On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
AutoCAD Civil 3D :: Code Set Style Labels
Apr 29, 2013My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
AutoCAD Civil 3D :: How To Edit Station Labels
Mar 28, 2012First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
AutoCAD Civil 3D :: Reinserting Alignment Labels?
Apr 29, 2009I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies View RelatedAutoCAD Civil 3D :: Existing Points Labels
Mar 5, 2013I have an existing topic dwg and it has points from the survey crew shots in the dwg, I need to label this points. I want to extract the TC and Gutter information from the points by picking the the points I want to label.
View 1 Replies View RelatedAutoCAD Civil 3D :: Profile Alignment Labels
Oct 4, 2012I would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies View RelatedAutoCAD Civil 3D :: Labels Displaying As Tags
Aug 20, 2013My labels are only displaying as tags. How do I get them to display as bearing and distance again?
View 3 Replies View Related