AutoCAD Civil 3D :: Labels Are Not Rebuilding
Jun 4, 2013
I opened a project that i had not been into for a month and for some reason the surface and labels will not rebuild automatically anymore. Surface is set to rebuild automatic and i've gone in and changed the regenauto from on to off to on again, also rebooted the computer with no luck. I have a combination of feature lines and points. If I edit the elevations along the feature line the contours do not rebuild and the label does not change either. If I hover over the elevation node in the feature line it will show the new elevation but the elevation label for that point does not reflect the change, neither do the contours. If it is a point and I change it with the panorama window, the elevation tag will change but the contours do not rebuild until I tell it to rebuild. Any slope labels going to that point do not update with it though.
View 2 Replies
ADVERTISEMENT
Oct 2, 2012
slow corridor rebuilding after adding superelevation?why?was ok previous years.
Civil 3D 2012
Work: Xeon W3503, 12GB, Quadro 2000, Dell P2211H x 2
Home: 3930k, 12GB, GTX 590, U3011, QX2710
View 9 Replies
View Related
Nov 6, 2013
I'm getting several messages saying "value on wrong side of alignment" when I rebuild my corridor. I've checked the two target alignments that I'm using and they are on the correct side.
Civil 3D 2014
View 2 Replies
View Related
Dec 27, 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
View 2 Replies
View Related
May 3, 2013
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
View 9 Replies
View Related
Apr 26, 2013
Rebuilding viewbase views? I have a drawing with unresolved views and I'm not sure how it happened.
On a semi-related note.. Does viewbase based sheet layouts make Autocad more unstable?
View 9 Replies
View Related
Oct 1, 2013
My company has an access database that has all of our service data on it. I am currently considering rebuilding the database because it is a database with one table and a million fields. I want to split the database up into separate tables with relationships. All of these tables would be linked based on the same key field Service_ID.
Now here is the hard part. The data would be in a one to many relationship with one record for service info and multiple records per service for pipe info. The data is currently linked to objects in AutoCAD Map 3d 2014 based on the Service_ID key field and a "service" link template.
If i rebuild this database, am I going to lose all of my links? or will i retain the links? Also, is there a way to automatically generate links based on the service_ID field? For instance there are 3 records of pipe information for 1 service. Previously all of these records would be in the same table, but now the tables are split. Since they have the same Service_ID as the Service information, will the links show up?
View 9 Replies
View Related
Jun 5, 2012
I'm working in a large top level assembly and the following is happening
1. Assembly is happy with no broken constraints
2. Edit a constraint (in this case, to rotate a part based on an angular constraint with another part)
3. Error message pops up telling me dozens of constraints in subassemblies are broken
4. Click Accept, assembly does not visually update
5. Click "Rebuild All" button under manage tab
6. 3 minutes later the model is updated, everything is happy, model looks how it should.
This type of problem has been happening lots to different assemblies with difference constraint scenarios.
View 5 Replies
View Related
Aug 10, 2012
I have a model that has been made up from a revolved sketch and then had loads of bits done to it etc.. Basically it is a tapered ring with a fillet on the top edge, I need a top face dxf export for profiling and to do this I need to remove the radius on the edge, but because it is a revolved sketch and it is not filleted it is not so easy to do with other references involved.
Is there a way I can temporally rebuild the edge to remove the fillet, I tried in fusion but it won't allow a Zero fillet edge?
I can't upload the sketch to show you unfortunately.
View 3 Replies
View Related
Sep 12, 2012
I am trying to label my drawing (bearings and distances) and am having a bit of trouble. . First, the precision isn't right. I keep trying to set the precision but whenever I add a parcel label it comes up with the wrong precision. Also, I can't get the scale of the labels right. They are too big and I can't seem to size them down any smaller.
View 2 Replies
View Related
Sep 20, 2011
When generating a line of contour labels with Contour-Multiple, most of the labels are orientated properly but some of them on the line are rotated 180 degrees. Why aren't they ALL orientated in the same direction?
Also, sometimes, all of them will be orientated in the wrong direction such that they are, essentially, upside down. Is this a bug or is there a setting to adjust?
View 4 Replies
View Related
Jan 12, 2013
I am trying to create a label for slope ratios. I want to have the label show only whole numbers if it is a whole number and go to the 10th place only when necessary. Is there a way to use the label editor to do this? I would think it would work something like
IF(<General Segment Grade>=0|1|2|3|4|5|6|7|8|9 then <[General Segment Grade(FRun|P0|RN|AP|GC|UN|SD|OF)]> else <[General Segment Grade(FRun|P1|RN|AP|GC|UN|SD|OF)]>)
but I'm not even sure I'm going in the right direction.
View 3 Replies
View Related
Oct 4, 2012
Is there a way to add a field within a label style? I made a custom alignment label and I would like to add a field that references a sheet (I'm using SSM) i.e. "See Sheet 1-2".
View 6 Replies
View Related
Oct 25, 2010
I need a style for intersection of alignments that automatically includes the abbreviations for Point On Tangent (POT), Point On Curve (POC), etc. I can create a style with the basic information of Station, Alignment Name, but adding the POT, POST, etc. in front of all alignment’s stationing and name doesn't seem available still in Civil 3D 2011.
View 9 Replies
View Related
Oct 17, 2012
I worked this out with C3D back in the day but for some reason I can't figure out how to renumber line tag label designations. What's making it tougher is that I need to create the tags in a block and try to create the line table OUTSIDE the block (this is so that I can have the block rotated to a deed bearing with dynamic labels in the block while retaining it's true orientation from state plane coordinates in model space). I have an old lisp file CLEARTAGS.lsp but this is not working. Perhaps this was made for 2010 or earlier. When I save the block, it jumps all the tag numbering way up for some reason.
Civil 3D 2012
Windows 7 Enterprise SP1
Dell Precision T3400
(Q9550 @ 2.83 GHz)
8GB RAM
Nvidia Quadro GTX 650 Ti BOOST
View 3 Replies
View Related
Aug 15, 2013
I seem to have a random, we'll say error for lack of a better term. I have a set of Point Styles with a Description Key set up for our survey points. When I import the points from a csv, I have 9 points that do not come in with the labels in the right spot. The label is supposed to sit next to the point style (see included image) Instead they sit 1 unit away. If you look at the included image you will see a point called COMH that is inserted correctly. Right above it is a point called WTMH that has the label coming in far to the right of the point style. Both the COMH and the WTMH have the same settings in the description key, and other than the block for the point, the same settings in the Point Style. I have completey re-written the description key, as well as re-created all the point styles, but this keeps happening. I have even re-created the block drawing and redefined the block in the dwt as well as an existing drawing.
P.S. I have added an image of the description key coding as well as the point style for the COMH andthe WTMH.
View 3 Replies
View Related
Dec 16, 2013
I am using Civil3D 2012 and have a drawing that will not allow me to add Contour Labels.
Unable to create contour labels
Issue You were unable to create contour labels. When you tried to create a single contour label, you could not select any of the contour lines of a surface. When you tried to create multiple contour labels, the contour label line disappeared after you selected the second point.
View 9 Replies
View Related
Jul 25, 2012
acad c3d 2013
My sag and Crest profile labels disappear when opening the drawing.
View 6 Replies
View Related
Apr 4, 2013
On a road project I have an acquisition parcel that is matched across 2 viewports on one layout. I would usually slide the parcel label so it's only visible on one layout. Then I'd add a second label that would be visible on the second layout.
This line happens to cross the viewport near the end. If I add a label in the lower viewport that looks reasonable. It will overlap in to the upper viewport. I can drag the label to very near the end of the line but it doesn't look right there. I don't think it's good procedure to try and force one parcel label on to it's own layer so it can be frozen in that one viewport.
Any technique for handling this situation?
Civil 3D 2012 SP 2.1
Dell Precision T7400, Xeon CPU 3.16 GHz
Win 7 Pro, 64-bit,12 GB RAM, Nvidia Quadro FX 4600
View 7 Replies
View Related
Apr 29, 2013
My sections are showing a label for some of my links that are coded as "top". My label style for the "top" link is set to none and some of the labels are still displayed.
The labels show in the sections, but not the assembly. We are running Civil 3D 2012.
View 2 Replies
View Related
Mar 28, 2012
First - the alignment station label text size when viewed in model space is fine but when viewed in paper space it comes in way to big. How do i adjust this so i see things in paper space as they are in the model?
Second - Would like to adjust the station label style from the defalt 0+00.00 to 0+000.000
View 3 Replies
View Related
Jun 11, 2013
Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
View 9 Replies
View Related
Apr 29, 2009
I accidentally deleted the major and minor station labels along my alignment. Is there a way to re-insert them?
View 5 Replies
View Related
Mar 5, 2013
I have an existing topic dwg and it has points from the survey crew shots in the dwg, I need to label this points. I want to extract the TC and Gutter information from the points by picking the the points I want to label.
View 1 Replies
View Related
Oct 4, 2012
I would live to label the PVI on my Profiles but not show the PVI label at the start and end of my profile. How to set this?
View 1 Replies
View Related
Aug 20, 2013
My labels are only displaying as tags. How do I get them to display as bearing and distance again?
View 3 Replies
View Related
Feb 14, 2013
i'm having an issue with C3D 2013, i have a plan drawing, with various layouts linked with a sheetset. I'm having trouble when plotting them from the sheet set. It doesn´t plot my alignment labels. Also happening on some other drawings like plan and profile. If i do plot them one by one from the drawing, they plot fine. The problem is that it's a lot of drawings to be ploting one layout at a time...
View 2 Replies
View Related
Mar 22, 2012
I have multiple profile views with a pipe network. In a number of cases, I have a pipe that extends to the end of one profile view and continues on the next. I can label the pipe on one profile but not on the other. Is there a way to add two labels to the same pipe - one label on one profile view and another label on the other profile?
View 2 Replies
View Related
Apr 3, 2012
We are working on a file here and the lables on the drawing are missing. We had station offset lables in our drawings and are now missing from the plans.
View 3 Replies
View Related
Apr 8, 2012
I am having a lot of problems with my vertical curve labels. I created a style that shows the length of the vertical curve, the k-value, the end and start elevations, and the elevation and station of the PVI, as shown. My problems are the fact that when I want to flip a label, they all flip (shown in the second picture). I also have noticed that there is only one drag point. Is this a setting that I unknowingly edited, or is it possible to flip labels individually?
View 9 Replies
View Related
Feb 12, 2013
I would like to have the leader arrow attached to the rim of the structure in profile view. Now they are attached along the side of the structure well below the rim. This is for the dragged labels. How can I adjust the arrowhead attachment point?
View 1 Replies
View Related
