I have a drawing with contours every 1m and according to the area that I have to display in my layouts I have to display contours either 2m, 5m or 10m.
How is possible to create labels for only this elevations and if it is possible, create several labels along one of these contour with specific interval.
I want to extract contours with elevation labels from a C3D 2011 surface for use in another 2011 drawing without the surface, as polylines and labels. Is there a way to do this?
View 9 Replies View RelatedHow to choose “no color” for the line extending between the contours labels?
I labeled the contour lines but sounds that it draws a line between them. Is there a way to hide this line to give it “no color” to have a better presentation for the entire map?
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
How do I rotate only specific parcel labels in Civil 3D? i saw posting for v2004, but no response. I'm guessing parcels haven't changed too much since then..
View 9 Replies View RelatedI followed the steps I found online to create color-specific surface labels (I assigned red to the cut elev and green for the fill elev.), but when I display them using the spot elevation on grid, I am getting both red and green elevations on same point (they are both fill elev or cut elev.), and why are there two elevations (cut-red and fill green) displaying?
View 9 Replies View RelatedI've an old countour map (hard copy drawn ages ago) which now I want to digitize.
I've scanned this map (can be saved in JPEG, PDF etc format) however I don't know if there is an easy way to create contour lines from this JPEG image.
I created a new surface, pasted my OG surface into it, set the build to exclude elevations less than and greater than but my surface still is showing every contour range. I want to only show contours at elevations of 371.5 and 370.5
Is it because it's a pasted surface?
So I received a whole bunch of contours from an architect. They are lines and arc. big sweeping arcs. Whats the best and fastest way to create a good surface. I can change them globally to a polyline but I need to add vertices like every 5 or 10 feet to get a good surface. Can I select multiple feature lines (after converted) to add vertices?
View 3 Replies View RelatedSome background: We have a composite surface of existing surveyed contours as a TIN pasted into existing aerial contours that we received from a client. We used polylines to generate our proposed contours, and then generated a proposed surface from that. We've made a blank surface, pasted in the existing surface, and are trying to paste in our proposed surface... only the existing contours outside of the proposed suface no longer line up correctly once we do.
We've tried applying the method laid out here: [URL] ........ (and the link referenced in the bottom) but are still having trouble getting the surface to work. We've tried offsetting as little as 0.25' and as much as 5' with the feature line draped over the existing surface, but it seemed that the greater the offset, the greater the discrepancy.
Just to make sure we even tried that correctly - should the breaklines that we add be standard or non-destructive? (I've tried it both ways with little success either way, so I don't know if it matters much in this instance, but perhaps for future reference it would work.)
I've attached a screen shot of our surfaces. The pink and green lines are the proposed contours, the white dashed are the existing. The outer red line is offset 0.25'. As I've mentioned, we've tried offsetting various amounts with decreasing success.
Is it possible to create C3D labels that are non-associative? That is, they do not adjust font size, etc., with changes in viewport scale.
C3D 2014
I am labeling my pipe network structures and I was trying to create a label with a dynamic block. I want to have an octagon with text that I can change. So when I label INLET 1 I will have the information I need plus a symbol that corresponds to it.
AutoCAD Civil 3D 2012 SP4
Windows 7 (64)
C3D 2012 SP3..I want to label the subassembly I have created. It is easy enough to create the label style and apply it through the code set styles. I want to drag the labels for pavement depth, creating a leadered situation. Why does the program create multiple labels for each marker or link? Can this be limited to one lable for the marker and link?
View 2 Replies View RelatedIs there a way to add elevation labels at any position on a feature line without having to create a surface?
View 9 Replies View RelatedI created surfaces in Civil 3d 2011 for existing and proposed and I did a surface volume between them. Is it possible to create a specific contour in the volume surface that represents the fill volume elevation (daylight line I think)? My proposed surface is a flood water elevation and I need to define the boundary at that elevation.
View 3 Replies View RelatedIs there a way to create a table of stations and offsets along a specific alignment at chosen locations?
Dynamic would be preferred.
I'm currently using version 2013.
Windows 7-64
8GB RAM
AutoCAD Civil 3D 2013
I am trying to create a surface rise:run slope label for our company template file. I have it set using the default values that I want. But right now the text is just 1:1...where we want it to read 1V:1H.
how I can keep the label dynamic to the surface, but put the V & H in the label after the values.?
I think it is normal to want a style showing stationing, speed design stattions, etc.But.... Radii of curves ? Clothoid parameters ?
Why is the reason Autodesk developers think that designers dont want to see this information instead of "add labels, aligments, multiple segments,. etc ....
(aligment by aligment ...... of a whole project ?
Civil 3D (2013)
I'm using AutoCAD Civil 3D 2012 and have a question about creating a surface. Firstly, I know how to create a surface and then add contours, how to add a boundary to the surface, and how to draw a polygon around contours and trim everything out and then create a surface of what's remaining but how can I create a surface from contours within a polygon I draw without trimming any contours out? That way I can have a smaller surface to work with but still have additional contours all around it.
View 3 Replies View RelatedI'm trying to create structure contours from drill holes, where I do not have a significant number of drill holes for the area being modeled. I've tried all of the contouring options, using strata polylines, and smoothing contours. creating smoother, more realistic contours?
View 3 Replies View Relatedi'm exporting a surface from 2013 to be used in 2010 for presentation. works great but the contour interval is not the same as the surface i'm exporting. working in 5/25 contours...xml import comes in with 2/10 contours. looked for a setting but can't seem to find.
View 2 Replies View RelatedI'm drawing a topo and trying to figure out a way to manually smooth out my contours. I'm not talking about the little jagged edges that you can remove if you use the smooth surface option under surface properties but the big ugly looking jumps you see when contouring a relatively flat lot. In the ancient version of AutoCAD my company used the contours came in almost like splines and you could move the vertices around to make them look good. I know you can go in and delete some TIN lines and edit point elevations but that is very time consuming and I'm hoping there is a quicker way.
I know I can extract them into polylines but there are too many little segments to be useful. I've seen the SIMPLIFY SURFACE option and while that takes away some of the roughness it creates some as well. Is there some better option than extracting and then drawing a spline between the parts I want to smooth out? These contours don't need to be 100% accurate, I just need them to look simple, like if someone was drawing them by hand.
I have added contours to my surface (the blue lines). For some reason the surface generated contour (the orange line) is jumping across the contours I've added.
View 8 Replies View RelatedMy TIN surface either did not generate contours or did not display them on my drawing. I created and tried surface styles of many contour intervals(from 0.5' and 4' to 2' and 10') without success. I made sure my contour layers on both the Style Dialog box Display Tab and Layer Properties Manager were turned on, still no success.
View 6 Replies View RelatedI'm having problems contouring in C3D 2014.
I'm using the command PL - polyline to create my break lines (Centerlines, top and bottom of curb)?.
In this particular drawing the first point I click on is carrying the elevation throughout the entire length and yielding bad contours.
Essentially the bottom of curb on each side of the street should be the same elevation with a crown at the centerline.
Instead the elevations are about five feet different because the beginning point is around the corne at a point of tangency on a hill.
This has not happened in any other drawings and I've done them the same way.
I redid the breaklines with the 3DPOLY command and aside from a few minor edits the surface came out OK.
I've been reading about 3DPOLY command but have not found out too much about what the actual difference is between 3DPOLY and PL commands.
Seems like 3DPOLY is the way to go.
I do not have too much experience with C3D 2014 and am making a huge jump from 2004 LDD. How to build 3D surfaces/contouring.
When I generating contour(surface) using Civil 3D it gives very complicated contours.Some times those contours cuts each other and have very strange shape.
I used to use SURFER software to generate contours.It gives simple contours.But I like to use Civil 3D because.
I attached SURFER contours and Civil 3D contours. I also attached AutoCAD file those who using older versing of Civil 3D.
I know how to smooth contours in Civil 3D but it does not solve my problem. You may say "You should use commands like swap edge,delete line .
We have a total of three machine at our office that are running 64-bit Windows 7 with Civil 3D 2013. Two of the three machines have problems with drawings that include AECC_Contours. When you try and start a polyline or line the mouse will begin to jump and lag. As you move the cursor off of the AECC_Contours the mouse returns to normal operation. I have looked around throughout forms and have yet to find anything that relates to this. Also I have disable Aero within Windows, thinking that may have been the issue. All three machines are running the same version of Civil 3D with the latest service pack.
View 6 Replies View RelatedWhile working in a drawing with civil 3D points and a surface created from those points, once in a while the contours will disappear. The contours disappear during any number of different commands, so it doesn't seem to be linked to a specific set of commands. If we save the drawing, close it, and then open it back up the contours are there with no problems. Is there a fix for it beyond closing and reopening the drawing. We are using Civil 3D 2010 in our office, and all of the current updates.
View 5 Replies View RelatedIm working in Civil 09. I need to adjust the surface I created in order for the contours to be correct. Right now I'm interpolating point elevations to adjust the contours. I find myself adding lines and adding and deleting points. It's tedious. I tried changing the grid spacing to smaller one. It didn't seem to work.
View 9 Replies View RelatedI have a surface with a bunch of contours. I want to view the contours at elevation 550. In Microstation there is a set display depth command. Is there a tool in autocad where I can view certain elevations.
I want to make layouts/viewports that are clipped to different elevations. For example I have a surface with 5' contours. I want to create multiple viewports on a sheet showing what each contour looks like at its elevation.
Civil 3D 2012 SP4.0 Windows 7 Enterprise 64-bit
C3D 2014 SP1
Dell M6600, Core i7 @ 2.3GHz, 16 GB ram
Dell T3500 workstation, too much ram to post
I encountered a problem while creating contours from the points. what actually is the problem with the points or tell the steps once again that would be great. I'm attaching the points file.
View 9 Replies View RelatedI'm running 2012. Is it still true that I need to label my contours in every drawing? I have a drawing that contains my existing surface (about 90 Acres). I have labeled the contours in that drawing. I then have a output drawing that the existing contours are a data shortcut. The contour labels do not show up.
View 3 Replies View Related