Is there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
Civil 3D 2013 SP1 (64bit)
When importing an event, my point descriptions are cutoff at 16 characters.
Is there any setting to increase this?
If I have Microsoft Access installed on my computer, can one easily modify the table?
If you can modify the table using Access, can you define a default DB or would I have to redefine the string length within a table everytime I create a DB thru Civil 3D GUI?
How shall I draw lines into a created surface using raw or full description of ascii file format(COGO)
for example in the imported file i have points to describe a road center line(CL),or edge of the road(ERD),breaklines(BRKL) and want lines represented by the descriptions to be drawed in the surface so that i can use the lines as guides in profiles design.I didn't want to use point number which are not serially ,and have tried to use point grouping without any success
The attached file could be of good use.
I am new to Civil 3D upgrading from LDD2009. I am trying to edit some point descriptions brought in through a fieldbook import through my survey database. Under my survey database in Survey Points I hit EDIT POINTS and it brings up the SURVEY POINTS EDITOR. My points are listed as white observed points but when I click on the description cell it won't allow me to change anything.
View 7 Replies View RelatedCivil 3d 2012..I used 3d orbit, it crashed. My points, point groups and newly updated description keys are gone.I have looked at all my backup files etc, and they do not want to display.
View 4 Replies View RelatedIs it possible to break multiple lines at a single point without a gap along a perpendicular line??
View 6 Replies View RelatedIs there a way to exclude points from a point group that have no description?
View 4 Replies View RelatedIn LDDT 2009, I was able to describe points like this: STK #32
But in Civil 3D 2013, whenever I use the # symbol, the description gets truncated. So, using the point description above, it will show up in Civil 3D 2013 as STK rather than STK #32.
Is this a setting or something that I can switch on so that the I can use symbols such as # and - in my point description?
I needed to remove a feature line that I used as a break line when creating a surface. When I removed the feature line from the definition of the surface, the grading did not change. It appears the points created by the feature line remain which is why grading didn't change. The only work around was to delete these points.
I noticed the same thing happens when I removed the surface boundary and inserted a new boundary. why these points remain and how to remove when I delete boundary and feature line from surface?
I have a couple hundred cogo points with all different descriptions. is there a way to add "use these" to the beginning of all the nodes at once?
View 2 Replies View RelatedI just received a drawing with a bunch of points in it. One of the layer is called V-ROAD-CNTR-PNTS. Unfortunately, the point number, description, and elevation are all in that same layer. How do I keep just the elevation turned on but turn off the point description and number? When I turn off or freeze the layer V-ROAD-CNTR-PTNS, all three disappear. I just need the elevation showing.
Attached is an image of my screen.
I am trying to set up our templete and I am having issues. I have set up description keys and such. When I import our survey data all comes in (ie blocks and linework). The problem is when I try to plot the block that are inserted on what appears to be the correct layer they do not plot out. When I freeze the point layer the block disappears as well. What setting am I missing that will create the blocks according to the description key and keep them on a separate layer like it did in Land Desktop but keep them dynamic? I am not sure if the subscription service covers.
View 9 Replies View RelatedIs there a way to have cad automatically create a survey point when a surface point is added manually?
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
We need to move a survey point. I know the point can be unlocked in the drawing and moved, but how can the survey database be updated? After the point is moved the database does not update even after closing and reopening the dwg and database.
View 5 Replies View RelatedHow are you or your company managing points as in field shots, storage, dulplicate point numbers?
are you using vault?
are you using the point database?
are you using one drawing file to import and store the points?
what we are doing now is using the point database as a storage location but it fails for notification on when a point # is duplicated.
surveys has a drawing file they use to import, store and build the existing ground surface from the points. this allows the notification of when a point number is duplicated. but it is not as secure or flexable as the old LDD way.
We don't use field books just text files from the collectors imported in. Vault is not an option for us. (at this time)
so what i am looking for is how others are adapting to this change, and what worked or not.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
It ought to be easier to move a survey point..I do believe my survey points are unlocked and I still can move them.
View 4 Replies View RelatedIs it possible to change te Break command permanently in the Break at Point command?I never use break, only break at point.
Changing te macro for break ^C^C_break to the macro for break at point ^C^C_break \_f @ doesn't work.
To do it manualy at the command prompt takes to much keyboard entries and mouse clicking.
How would I create a Point Table that would allow me to have Point#, Type, Size in individual columns when I have decription keys that area like this;
GUM 6 to be a 6" GUM.
Is there any way to have the data for the Type in one colum and the size in another?
C3D12
C3D12-13
Win7x64 6gb
C3D 2012 SP4
Win7 Pro
I want my survey symbols to come in on their own layers, separate from the point label. Lets use UPOL as an example: I have a point style UPOL*. It has assigned to it a block representing the utility pole.The size is set to drawing units, and sized to .1 inches.
The marker is on layer: V-NODE-POLE-SYMB
The label is on layer: V-NODE-POLE
The description key is as follows. UPOL*
Style: UPOL*
Point Label Style: Standard
Layer: V-NODE-POLE-SYMB
No other parameters have been choosen; scale parameter, fixed scale, or use drawing scale.
Have I done this correctly, to accomplish my task? I also noticed that I cannot turn the point label off by picking it. I have to turn the layer off in the layer manager.Should I use the description keys to scale the symbol, instead of the point style?
Question 1: Is it possible to change a Survey COGO point to a regular COGO point so you can edit the datum?
If not:
Question 2: Is it possible to transfer the survey database from one office to another so the end office can make datum changes to the survey COGO points. Will the link between the file and the database still apply?
C3D 2013
Windows 7 64 bit
Is there a way to "data shortcut" information imported from a data file into multiple drawings? If so, is there a way to lock the data points "in place" and not be able to adjust the point location/elevation, but allow the movement the text information around within the drawing.
The goal is to have multiple drawings with these data points and be able to move the text information from the style, but not (in a million years) be able to move the data point itself. There may be multiple drawings with these points located within them.
Converting files from Civil 3D 2013 to AutoCAD 2007. We are currently trying to utilize ETRANSMIT to share drawing files with our clients. When going through the command we choose "AutoCAD 2007 Drawing Format w/ Exploded AEC Objects"
This seems to work for everything except for the survey symbols. All of the linework, xrefs, labels and drefs come in fine when opening in LDD 2009. However upon closer inspection, we have no symbols: tress, power poles, gas meters, etc.
Sharing our files with a utility company becomes impossible without these symbols. Is there anything we can try?
Win 7 Pro 64-Bit - Dell T1600
Intel Xeon 3.30Ghz
8Gb RAM
Civil 3D 2013
Survey database is open for edit, drawing displays survey points and figures from imported survey data files. When I try to use _AeccCreatePointManual, after selecting a location, entering a description and elevation, no point is created. The command appears to complete and gives no error but no point shows up in the drawing or survey database. Default layer is <use current>.
View 6 Replies View RelatedI am wondering if it's possible to have a point code automatically add data to a user-defined field either in the survey database or in a drawing. For instance, our surveyors currently will code a catch basin as CB INV2.2 if it has an invert depth of 2.2'. I have a survey point user-defined property called InvertDepth. Is it possible to get the survey database to automatically add 2.2 to that user-defined property or does that have to be manually input? I have an expression and a label style that will take the elevation shot and subtract the depth number to give me the invert elevation on a lable, but I'd like to see if this can be done automatically without having to manually type in the depth on every point that is a catch basin or other inlet.
I've looked into the description key-set's parameters, but they seem to be mostly for display purposes and writing a full description.
It is my understanding that C3D will only display the first point when there's more than 1 code for a survey point.
My first thought was to copy the line in the PENZD txt file and edit so that there's only 1 code listed. I tried appending the point number with "A" and ".1" without luck I assume I would need to use the next available point number.
An example of my txt file is:
17371,298429.877,568639.651,801.030,LPM SGN This produces only the light pole symbol and not the sign.
C3D 2012 sp1
W7Pro 64bit
HP Z400 Workstation
16 GB RAM
Intel Xeon CPU W3565@3.20GHz
NVIDIA Quadro 4000
When I import Points (w/o Survey Database) that contain Point UDP's they come in just fine, (see attached). However, when I import those same Points thru the Survey Database it does not populate the addition UDP info on the Point Label (see attached). Why? I have created the Styles, Point File Format and I have even added data to Survey DB Extended Properties.
View 3 Replies View RelatedIs it possible to rotate a survey point symbol, my grips are missing? Civil 3d 2013.
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
In an effort to firm up my understanding of how styles, point groups, description keys and layers collide, I followed the recommendations of an article. How groups/deskeys function together for layer visibility.
This process of Layer visibility that is supposed to make the program flexible makes it almost impossibly complicated.
I'm looking to change an elevation of a survey point within a drawing. I can see where it is possible to manually unlock the points from the Survey Database to allow the user to edit the point. I'm not seeing a method or property in the API Help for 2013 to do the unlocking with code.
Also is it possible to convert a Survey Point to a regular Cogo Point through the code? Or do I have to delte the point and then recreate it as a COGO point? I think this will be my work around if the above doesn't work.
Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
I have been trying to export our 2012 DescKeys with Point Styles and Labels to 2011. How to do this without recreating them all.
View 2 Replies View Related
