I am new to Civil 3D upgrading from LDD2009. I am trying to edit some point descriptions brought in through a fieldbook import through my survey database. Under my survey database in Survey Points I hit EDIT POINTS and it brings up the SURVEY POINTS EDITOR. My points are listed as white observed points but when I click on the description cell it won't allow me to change anything.
View 7 RepliesIn 2012, the survey cogo points no longer seem to update after browsing to the observation data, making an edit and then saving. It worked fine in 2010.
(running C3D 2012 sp4, Win7 64bit, 8GB)
here's my process:
1- Import the asc file into my drawing.
2- Convert the asc file to a FBK file
3- Import my FBK file. The survey figure linework generated doesn't overlay my previously imported asc file. I checked the FBK file and the coord's match the asc file. I'm confused as to why the survey figures don't overlay the survey points from the asc file, since the coords match in both? The survey figures are all shifted .7' and 54deg. from the points. The elevations are all good on the survey figures, as they match the survey points.
So my quick fix is to explode the survey figures, since I don't really need them for what I'm doing, and then select all the 3d polylines and move them to them to an appropriate survey point. Everything then looks fine and I can get the job done.
However, I would like some insight as to why this might be happening. It's strange that the FBK and asc coordinates match, but the survey figures aren't lying over them.
Is there a way to have a multiline point description? For example, in the raw description, i wrote out the text, but I would like to return a line for the parentheses.
Civil 3D 2013
Windows 7 64-bit
Inteel 2.40 GHz 8 GB RAM
Dell T7600
Civil 3D 2013 SP1 (64bit)
When importing an event, my point descriptions are cutoff at 16 characters.
Is there any setting to increase this?
If I have Microsoft Access installed on my computer, can one easily modify the table?
If you can modify the table using Access, can you define a default DB or would I have to redefine the string length within a table everytime I create a DB thru Civil 3D GUI?
i need to put points on an alignment at each station. i've figured that part out. what i want is the station label to be the point description. i don't see a way to do this without editing each point which is way too time consuming.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
How to set a default point description to match the point number. I need to match the point number and the point description as per below:
Point # = 1 - Description = 1Point # = 2 - Description = 2Point # = 3 - Description = 3and so on.
Is there a quick way to add this description once the points are already created?
Also, it seem I can't make the default style and label to work. I edited the Feature Setting on the Setting tab of the Toolspace and I made sure there's no child override. When I open the point creation menu, my default styles are there (grayed out), but when I create the points, they pick up another style and another label style.
I have created a custom point import with vb.net into Civil 3D 2012. I would like to be able to apply the description keys to the points after I import.
View 6 Replies View RelatedI am building a new template for our office and just finished building my Description Key Code Set, and Figure Prefix Database. I stopped to do a quick trial run on one of our surveying files, but when I imported the file all of the figure lines imported correctly but the points all came in the default point style and label style. I went to the Settings Tab/Points/Commands and made sure my "Disable Description Keys" was set to False. This is not my first template and I have never had this issue before.
View 4 Replies View RelatedWe are using Civil 3d 2010.
In a description key code file, I would assume that a description key code of simply * would capture all points, but it seems this code gets ignored. How do we create a key code that captures all points?
For example, if I want to take advantage of the hierarchical processing of DKC files to assign layers, point styles, label styles, etc, I can theoretically create a 'design' DKC file that makes all points, regardless of their desciptions, to be sized relatively, and then move that DKC file to the top of the DKC file list.
I know this can be accomplished through the "_all points" point group, but I want to be able to control point layers as well, and as far as I know, neither point groups, point styles, nor label styles affect the insertion layer of a point, but DKC files do.
I have a user that imported srrvey points and after getting all the points in and set up has discovered that the point over 100 have an extra 0 in between the letter identifer and the point number so instead of A100 he has A0100 , there are several hundred point descriptions to change is there a way to get rid of all the extra 0's without editing each one.
View 3 Replies View RelatedI am trying to find a way to offset points along an alignment showing station, offset and description. This is for a plan and profile sheet see attached example clouded in red.
View 2 Replies View RelatedI had an issue where I dropped points into my drawing for a survey and they weren't at the distance compared to recorded plat. I have checked the points mathematically, and they were dead on. A coworker suggested that I WBLOCK the points I was working with that way I don't move single points out of place. I disagreed, because the way i move points is I use the TOOLSPACE and move them as a group. So what I did was to drop the points again and now they were dead on the second time. I don't like turning points into a block due to the fact that it messes up my drawing.
View 6 Replies View RelatedCan I apply a default style to points with a raw description not in the description key sets?
When I import survey points into the drawing my description keys will assign specifed styles (and therefore layers) to descriptions it recognises, and a default style (and layer) to ones it does not recognise.
Then if i change raw descriptions in the drawing I can "Apply description keys" and have the styles and layers change based on the changes I made to the raw description. This is fine for descriptions in the key set.
Can I get Civil3D to apply the default style to points that did have a description that is in the DKS but has now been changed to one that is not? As it works for me now, these points remain unchanged in there layer and style.
Civil3D 2014 - Windows7 64bit
C3D 2012 SP4
Win7 Pro
I want my survey symbols to come in on their own layers, separate from the point label. Lets use UPOL as an example: I have a point style UPOL*. It has assigned to it a block representing the utility pole.The size is set to drawing units, and sized to .1 inches.
The marker is on layer: V-NODE-POLE-SYMB
The label is on layer: V-NODE-POLE
The description key is as follows. UPOL*
Style: UPOL*
Point Label Style: Standard
Layer: V-NODE-POLE-SYMB
No other parameters have been choosen; scale parameter, fixed scale, or use drawing scale.
Have I done this correctly, to accomplish my task? I also noticed that I cannot turn the point label off by picking it. I have to turn the layer off in the layer manager.Should I use the description keys to scale the symbol, instead of the point style?
My field crew assumed a coordinate system and surveyed a job. I need to rotate the points in my dwg to match another survey. I have not found a rotate points command. Other LDT type commands have been replaced by standard ACAD commands by adding the transparent commands to them. I tried to use the ACAD rotate command and the transparent commands to rotate my points, but there is no transparent command to find multiple points. I need to select the points by point number range if possible.
View 9 Replies View RelatedHere is my procedure.
1. Import survey point via ascii file into a new drawing call it Field-dwg.
2, Create a survey data base
3. Import all points in the the data base under import event.
4. open existing drawing, work-dwg, import points as needed from the Survey Data Base.
Problem : Survey points needs be renumber.
I goto field-dwg, and fix the points (renumber).
open survey data base for edit, and import Event, field-dwg/points/update : nothing happen
also try Import Event, field-dwg, survey points, update : nothing happen
so I re-import the points, all is good.
Then I goto work-dwg, and try to update the point, nothing happen.
I was wondering what is the difference between importing points under the Prospector tab versus importing points under the Suvey tab? And how either of the two methods relate to using Data Shortcut?
I would like to create a survey topo drawing that contains points and surface information which other Design drawings that are attached to the Data Shortcut project can access but not be able to make any changes to the original points and existing surface information.
I would like to remove certain points from my survey database. I have all the points that i want to remove queried into a point group. Is there a quick way to delete these from the database?
View 9 Replies View Relatedwhat if i have points that are non-consecutive? the survey crew is new at this so i'm getting some higher number points that line work wise appear in the middle of lower number points. the figure seems to draw numerically. is there a way to do a figure by proximity?
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
I have created cogo points for field staking. I'd like to share them through the survey database.Can I add the points to the Survey Database without first having to export them to a file?
View 1 Replies View RelatedI am unable to delete points from my survey database. What could be preventing me from performing this task?
View 1 Replies View RelatedEvery week I recieve new survey data (typically around 20 points) to insert onto an existing surface of our local landfill.
The surface is displayed as minor and major contours. The new survey data typically always has higher elevations then the exist surface and shot roughly 2 meters apart.
Here's my issue...when the survey data is inserted and the surface is rebuilt, the contours seem to turn into little cones at each new point. see attached...
how to eliminate these 'cones' so the surface contours seem more relistic?
Sometimes when i import points Civil 3d creates a Point group in the drawing with the name of the point file, sometime it does not. I prefer when it does create this point group. It always seems to create a Survey Point Group. How do i control wether or not a point group is created in the import?
Civil 3D 2013
HP Z400 Workstation
6GB of RAM
296GB HDD
ATI FirePro V5700(FireGL)
Win 7 Home Professional
How to set stakeout points on a pipe network? I have an alignment from the engineer that also has a pipe network associated with it that I would like to automatically set points vertically and horizontally on (like I can do with a regular alignment/profile).
C3D - 2014
Which is the preferred database to store survey points?
View 2 Replies View RelatedWe need to remove multiple survey database points from a drawing but not all, due to construction on a site previously surveyed. What is the best method for this?
C3D 2013 (latest updates)
Win 7 Pro, 64-bit
16 GB RAM
While adding a vertex to a survey figure, if I click too near (like within 0.5') a survey point, the new vertex snaps to the survey point and uses its point number as the new vertex. Is there a setting for this snap feature to turn it off or change the tolerance?
View 9 Replies View RelatedI remember in LDD you could insert points in an area, Is that possible in civil 3d. I have a small area of an big project that i want to review all the points. This project has 517000 points in it so it takes to long to insert all of the points.
View 9 Replies View RelatedMy surveyor gave me a topo survey done in no particular coordinate system. He set up his total station on a PK nail and gave it a coordiante of (5000, 5000, 100). I used this survey to generate a surface.
I also have a site survey of the same site, done in state plane coordinate system. the two surveys have mulitple common points; pk nails, iron pins ect.
What i need to do is move the points for the topo survey over to the survey that is in state plane. A simple move command will not do this.
How do i go about moving these points to thier correct location without having to manually edit the .txt file?
I’ve run into an issue with importing survey data using field books.
I started by importing my primary control using a field book. There were no issues with importing these points. I then proceeded to import subsequent field books with additional control and then topographic mapping. In the last field book some points were accidentally overwritten due to an error in the field collection. No error message was given to let me know the survey points were in use and being overwritten. Luckily I caught the error before I proceeded to the next field book.
I tried to reimport the field book that originally created the points that were overwritten. At that point C3D told me that the points being occupied in the field book did not exist. I checked the point list for the primary control field book under the "Import Events" in the Survey Tab of the Toolspace and indeed the points in question were no longer listed.
I then proceeded to reimport all the field books in order, starting with the primary control. I got through several of field books before C3D again told me the point being occupied did not exist. This despite the fact that this same point was occupied in previous field books. After trying once again I was able to get through the field books.