When I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 RepliesIm trying out the "Demo"version and now find some anomaly.
If i use in ACAD2007: With "PSELECT" and then "P" or "L" i could select the last marked Object/Selectionset. I had just to select the Object with the mouse. Now in ACAD2010, with this routine i can only select objects which i have selected in a command (before or within).
For example: Draw a few circles and lines. Then copy 3 of them. ESC. And select another few. ESC and then use PSELECT P and it marks the three which i selected to copy and not these i've selected with mouse!
The same in Lisp with: (entget(entlast)) . You aren't able to select those object which where only marked by mouse.I know; mostly you use a command with some objects and then use another with the same objects, and it works. But when you klick ESC or even in Script or Lisp you got problems, and its not very "proper" at all. Is this the new handling with the selection set: feature odr big?
On one computer when I select my selection tool I have a circle with a + inside or - whichever I choose to select or deselect an object. BUT, on my other computer I have a large cross hair type thing and I can't tell whether I am selecting or deselecting... what the heck is going on!!
View 2 Replies View RelatedI cannot get the advanced select objects tools to work.
I type:
select <enter>
wp <enter>
Make my polygon, and then I'm stuck in a single item select mode. If I hit enter, they all unselect and I can't do anything. Typing a command (like "m") does nothing.
Typing m <enter>, and then doing the selection yields the same result. At the end of my selection process and I hit <enter>, it sits in the single object selection mode (the little box cursor). Hitting <enter> here again makes the selection dissapear and I'm back to square one.
every time I select something a small box pops up in my way with the object's properties. I can't figure out how it became turned on, and don't know how to get rid of it.
View 4 Replies View RelatedAs I move my cross hairs over an object in a drawing it wants to select or highlight the object without clicking on it. On detailed models/drawings it takes alot of time and is almost impossible to use. Is there a way to turn or toggle this function off?
View 2 Replies View RelatedWhen dealing with blocks, in this instance. If I select the entire object, I get one type of color in the layer pull down. If I select a portion of the object, I get a different color-what is going on? Is there a switch or something that I am missing?
View 1 Replies View RelatedIs it possible to select an object for reading in an XRef?
PS I think it has something to do with Editor.SelectNestedEntity() but it is the end of a long day and I can't fathom it out
HOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
I can toggle "Selection Modes, Object Grouping" on by checking the box and save my file. When I close AutoCAD 2012 and come back in Object Grouping is turned off again, even if I pull up the same drawing. I can't seem to find a lisp function or command to turn this on. Seems that my only option is to go back to the options each time and turn it on. I've got a registry entry or a lisp command I an issue to keep this turned on.
View 2 Replies View RelatedWe have this problem with nothing showing up in the properties tab when we select a line/object.
We have tried everything from here:
[URL]
But still can't get it work.
Is this more of a Windows issue rather than AutoCAD? We are running Windows 7/64.
When objects are selected, they don't show up on the properties panel (or on the Quick Select panel either) It doesn't matter what method I use:
-Pick one object (lines, arcs, circles, blocks, etc), the Quick Properties flyout appears, but empty. Properties flyout show "no selection"
-Window-select object or objects. Quick Properties bar shows up empty again. Properties flyout show "no selection"
-Click on the Quick Select icon. It prompts me to pick geometry. I do. The Quick Select window comes up, but where it says "Object Type", it only has the option "Multiple", and not the normal list of the geometry you selected.
Have Autocad 2011, as well as Autocad 2010 and Inventor 2010 (trial license) on the same machine.
Intel Core2 Quad Q8200 2.34 GHz
8 GB RAM
Windows 7 Pro 64 bit
have to select an object under an artistic media brush object. i try hold down alt key when select the object under the artistic media object but it select the second object
View 2 Replies View RelatedHow do I drag to select over the top of objects without selecting and moving the objects under the mouse when I begin the "drag to select" motion?
View 2 Replies View RelatedI've already started using the AutoCad 3D.
how to put a 3D object on top of the another 3D object in autocad"! E.g.,I want to put a 3d object of one leaf (raised 1") on top of the vase, so that the edges of the leaf are placed completely on the surface of the vase.
I extruded the leaf 1" first, then tried to copy it on a solid cylinder of a vase, but it didn't work!!! It seems to be simple, maybe not!
In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View Relatedmaster im new in autocad 2014....i have a problem now when i select line or object it highlight or make a broken line....but when i select the other object or line my previous selected back to normal..i mean i can select only one line if i use single selecting....how to select all object or line with single select continuously, except using hold left click...
View 1 Replies View RelatedI trying in max 2012 to select some object(object count 600)by select from sence option but this selection process is taking long time.
View 2 Replies View RelatedHow can I select all the objects (lines, plylines, etc) in the drawing using C# + AutoCad?
AcadSelectionSet select = _acadCurrentDocument.SelectionSets.Add("my");select.Select(AcSelect.acSelectionSetAll);
Trying to modify this coede, but something is missing.
We have a schedule tag for space objects created on our tool palette. When you use the Multiple option, you cannot do a window selection unless only spaces are visiable. If other object types are in the selection set, the program seems to get hung up... no error is produced... it just seems to spin relentlessly. We have to Cnt+Alt+Delete to get out of it. You cannot preselect the spaces and use 'P' for previous selection set, since the last selection set was the first one you selected to place the first shedule tag.
I thought I could create a tool to return the selection set to the select object prompt with the simple line of code, like this - this should work but does not:
(ssget "X" (list (cons 0 "AEC_SPACE")))
it returns the spaces to the prompt, but for some reason they get filtered out.Below is the command line snippet that shows multiple attempts...
Command: _AecScheduleTag
Select object to tag: Specify location of tag <Centered>:
Select object to tag [Multiple]: m
Select objects to tag: (setq ss (ssget "X" (list (cons 0 "AEC_SPACE")))) <Selection set: 12dc> 7 found 7 were filtered out
Select objects to tag: !ss <Selection set: 12dc> 7 found 7 were filtered out, 0 total
Select objects to tag: !ss <Selection set: 12dc> 7 found 7 were filtered out, 0 total
I am working on a drawings with nested xrefs and am experiencing major delays when selecting objects using crossing windows. It is as if the computer thinks I am selelecting the xref even though the curser doesn't touch any visible exref entities. Basically, I click to start the window and the curser freezes for 10 to 20 seconds. I am experiencing the same problem with other commands (intermittenly) such as move, line, and offset. The exrefs are on a separate locked layer and have been moved to the back of the drawing.
View 2 Replies View RelatedHaving problem with object selection when covered by other objects ie lines,arcs etc on a solid model---autocad 2011---did not seem to be a problem in 2006 version,but wondering if switching layers on and off is the only way?
View 9 Replies View RelatedI'm creating a VB.Net routine which will run the REVCLOUD command. In my application I prompt the user to select a single polyline using:
EntRslt = acDoc.Editor.GetEntity(EntOpts)
Then later I run the REVCLOUD command using:
acDoc.SendStringToExecute("_revcloud Object Poly No ", False, False, True)
Where Poly is the polyline I selected earlier. Of course, the line above doesn't work since "Poly" is interpreted as a string. But I would like to figure out how to pass my VB.Net selected Polyline into the REVCLOUD command.
How I might do this? The REVCLOUD command will not accept the "Previous" selection set so setting the Implied Selectoin does not work. If my Polyline was the Last object in the database I could use the "Last" option, but it isn't.
Question,
I have a list of blocks in a datagrid. When i double click a certain record it gets the objectid or handle.
Now i know how too highlight the object. But i don't want to highlight the entity but select it so i can change it's property's in the property pallet.
In the first screen shot you see the code i have. wicht highligts the record but the propperty pallet display no object selected.
But i want it to work like the next picture.
So the question is. When i know an entity's objectid or handle how do i select that entity programticly.
I have a data grid view with all alignments included in the drawing file. If I choose an alignment in data grid view, I have Id of that alignment.
I have a button, and I would like that if i press that button then selects that alignment in the drawing(graphic). I would like that there was only one object selected, and if there are more selected objects before,then un-selected them.
I have seen in internet, the code snipset:
"Autodesk.Autocad.Internal.Utils.SelectObjects(objectId[ ] Ids)"
Is it obligatory that objectId be able a List or array?
and
"Editor,SetImpliedSelection"
But I don´t understand them. Are there any full samples about his?
When I select an object to move I am unable to snap to the grips of the object or any other object close or any intersections. I have double and triple checked my osnap settings. Also, If I select a circle to move I am unable to select the center of the circle through additional osnap settings. One last issue, If I select an object and do a copy with base point command, I am unable to select a definitive base point. No grips or intersections show up.
My co-workers are able to do these functions but I am not.
STEPS: Group > Select Ojbects
PROBLEM: When I go to select the objects as as a SINGLE OBJECT, each object within the group is selectable -- as if they were not grouped.Shouldn't it be that when I select ANY of the objects within the group ALL OBJECTS in the group get selected, and not just each object?
how or why objects aren't being highlighted BEFORE you select them?
In 2011 I was able to (say preview the object) highlight the object before selecting it.
I noticed this when I have a few lines on top of each other and couldn't 'toggle' through to bring the correct line to the front.
Also occurs when hatching by Object, object doesn't highlight.its just a variable I can change.
We have a perenial problem with our old GIS software where files corrupt and drawing objects are lost.
There are few export options available, but export to shape is one of them. This means that I can export a damaged file and then import it into CAD with the layers intact and the tagged numbers (similar to object data or a block attribute in CAD) imported as object data. In order to make a new uncorrupted version for the GIS program.
Is there a way to select objects by object data?
If a file is corrupted, the only real way to repair it at the moment is to go back to the original cad drawing and reimport and then retag every single tagged attribute on what can be thousands of drawing objects, and by then we may no longer have the handdrawn data to even do that.
The next workaround is if I creat new dwgs from the cad drawing, Each one containing the objects with the same object data, and each saved with a file name that matches that object data, and then reimport into the GIS. (it can use the filename as a tag). This creates a new GIS file with the surviving information that should not lose any more data and we may be able to patch the 'holes' afterwards.
The problem is selecting all the polylines in the cad drawing that have that same tagged number in the object data. Select similar just goes on object type and layer. This would be easier if I could select by object data and get everything with the same tag in one go.
A way to batch create the new dwgs from that selected data would be nice too.
C3d 2013
I am trying to create a small application in C#.Net where by clicking a button, I should be able to select a drawing object in the AutoCAD file to get the object's handle.
I am able to open the Drawing file from the application but unable to figure out how to get the drawing object handle by clicking on it through the application.
i need a code to save user onscreen selection to jpg.
i think i will declare Graphic object and draw each entity in this object but what will i do for the text dimension complicated blocks.