As I move my cross hairs over an object in a drawing it wants to select or highlight the object without clicking on it. On detailed models/drawings it takes alot of time and is almost impossible to use. Is there a way to turn or toggle this function off?
View 2 RepliesI am having this problem for the first time with my most recent install of 2014 on a Windows 8 computer. When copying a line or any other object along another line as a base, when I type the distance that I want to copy the object, it deselcts the autosnap vector that I had specified. For example, now when I copy an object along a line at various intervals, I have to move my mouse after entering the distance each time to enable the object snap to reselect the direction I want to copy it (along a line that should stay selected through the object snap: nearest).
Is there some object snap or dynamic input setting that I need to change?
I used object snap tracking for years.Since I upgraded to AutoCad 2014 why does object snap tracking only work with Dynamic input turned on?
Personally I do not like to work with Dynamic imput on, when I use object snap tracking with out DI turned on it doen't work right. Past versions worked fine. What do I do to get this back?
My Object Snap settings will not stay "set". Each day i have to reset the options i wish for each dwg i open up that day. also the settings do not stay set even when working on same dwg for several hours. Every couple hours i have to reset them to my options.
View 2 Replies View RelatedThe problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedWhen I select an object and pan to make another selection the first object "deselects". The object(s) will stay selected until I pan and as soon as I start to pan the grips go away and the object(s) is deselected.
View 9 Replies View RelatedFor as long as I can remember, across all versions of Autocad, I've had problems picking the right item on the popup menu for object snap (shift-right click). It frequently picks the item below the intended one, i.e. it will pick Parallel rather than Perpendicular. Trying a second time works every time. This problem has been so consistent that I don't believe it is user error. The item is highlighted, after all. There is no way I'm repeatedly missing it. Is it possible to calibrate the mouse in Autocad?
View 9 Replies View RelatedObject Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedIm trying out the "Demo"version and now find some anomaly.
If i use in ACAD2007: With "PSELECT" and then "P" or "L" i could select the last marked Object/Selectionset. I had just to select the Object with the mouse. Now in ACAD2010, with this routine i can only select objects which i have selected in a command (before or within).
For example: Draw a few circles and lines. Then copy 3 of them. ESC. And select another few. ESC and then use PSELECT P and it marks the three which i selected to copy and not these i've selected with mouse!
The same in Lisp with: (entget(entlast)) . You aren't able to select those object which where only marked by mouse.I know; mostly you use a command with some objects and then use another with the same objects, and it works. But when you klick ESC or even in Script or Lisp you got problems, and its not very "proper" at all. Is this the new handling with the selection set: feature odr big?
When dealing with blocks, in this instance. If I select the entire object, I get one type of color in the layer pull down. If I select a portion of the object, I get a different color-what is going on? Is there a switch or something that I am missing?
View 1 Replies View RelatedHOW DO YOU TURN THIS OFF????!!!!!!!
If you select an object and then drag it, it moves. This is without initiating the MOVE command and without picking any grips.
I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I'm trying to snap one object to the other with vert snap.
It's trying to snap from the center of my object rather then the vert I am hovering over. In the Snap settings I have only "vertex" checked so it should snap to whatever vertex I hover over but no...This keeps up I'm going back to 2008 when all this worked fine.
I'm new to working with dynamic blocks, using AutoCAD 2007. I have a base cabinet elevation block and want to have it so that when I change the height the door swing line stays at the midpoint of the door.
View 9 Replies View RelatedI am creating a dynamic block of a conveyor belt it has a set number of widths and needs to be stretchable in length, which I have managed to do. The motor is placed half way down the length of the conveyor and needs to stay centered
I know I need to use the move command and put in a factor of 0.5 somewhere, but I can't remember how to do it.
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
In Quick Select command function, I want to use more properties value to select one type text or other object.
View 9 Replies View Relatedmaster im new in autocad 2014....i have a problem now when i select line or object it highlight or make a broken line....but when i select the other object or line my previous selected back to normal..i mean i can select only one line if i use single selecting....how to select all object or line with single select continuously, except using hold left click...
View 1 Replies View RelatedAutoCAD exchange or any books that are available on the web. Everyone simply says "here, it exists" but I can't find a description of what object snap enforcement is, nor have I managed to figure it out from its behavior in AutoCAD.
View 4 Replies View Relatedusing autocad 2013.
is there 3D object snap tracking?
I get inconsistent results when I try to use the object snap to a point such as an intersection in an xref. Sometimes it works and sometimes it does not. Even the "nearest" doesn't seem to recognize the xref consistently. Is there a way to insure that the point is recognized?
View 9 Replies View RelatedHow to use keyboard shortcut to allow for a temporary override of my "Nearest" OSNAP. I often find myself pulling leaders from splines and/or circles and need the "Nearest" OSNAP active.
I was in CUI and saw the temp override shortcut key was setup but inactive as it has no ties to any keys. I also saw others setup with shortcuts keys and decided to give them a demo. While in a line command (for example) i held 'SHIFT + C' to trigger the temp override of "Center." It didn't seem to work. Dynamic input popped up as if i was entering "C."
I want 'SHIFT + N' to be temp override for "Nearest" OSNAP.As a side note, i was able to set up ACAD to zoom extents and close dwg simultaneously with 'CTRL + W' without any hiccups.
When using object snap feature, if a particular point has multiple roles, by which I mean it could be {endpoint, node point, circle, intersection, etc.} at the same time, is there a way to toggle the snap point selection?
mt.png
For example, does there existKey or key combination 1: Change the object snap mode to “single” amongst all enabled modes. Key or key combination 2: Iterate one by one through all available modes.
tg.jpg
I no longer seem to be able to snap to the nodes of block attributes.
My osnap settings are set to snap to nodes. I wonder whether it's a variable that on my previous version of AutoCAD was set to one thing and the new version defaults to another.
I love the feature of Object Snap Tracking but for some reason or another it has stopped working. I normally use F11 to turn it on or go through the drafting settings menu to turn it on. The Object Snap Tracking box is checked and should work, but it doesn't. Is there a magic variable that needs to be set?
View 2 Replies View RelatedHow do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replies View RelatedI am looking for the perpendicular function specifically. However, at this point I can not find the tool bar for any of the snap functions.
View 3 Replies View RelatedI just switched from Autocad 2007 to 2013. how to display the object snap toolbar? the one with center snap, mid-point snap, etc options?
View 3 Replies View RelatedUsing AutoCAD Civil 3D 2013, now installing Service Pack 1 (kept crashing, this time it's working though), and I'm trying to find the area of a pathway that I've drawn in 2D with standard lines. Using the area tool, I want to find the area of the path, but it arcs around a 180 degree corner. I tried getting a rough estimate of the area by clicking at several points along each of the arcs, but after clicking a point where the arc joins the straight line of the straight section of the path, it literally won't let me click the next point. I can, however, specify the next point as long as it's nowher near the arc. Same goes for the polyline tool.
Just got an error code for the Service Pack installation, too. "A problem prevented the service pack from being installed, contact your administrator. Error 1603"