Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replieshow to snap 3D text to a defined vanishing point. Seems pretty straight forward but it does not seem to be snapping to the plane I defined?
Video:[URL]...
How can I snap the center of an arbitrary symmetrical object to the grid? For instance the center of a circle or rectangle. According to this discusssion it's not possible: [URL]
How can I define a reference point in an arbitrary object or in a group of objects and snap this to the grid?
Object Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedI am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies View RelatedI have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
I'm trying to snap one object to the other with vert snap.
It's trying to snap from the center of my object rather then the vert I am hovering over. In the Snap settings I have only "vertex" checked so it should snap to whatever vertex I hover over but no...This keeps up I'm going back to 2008 when all this worked fine.
is it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
I used the measure command to place points along a polyline. I'd like to draw a poly from the points that were created. I can't seem to snap to those points. I don't see anywhere to get the osnaps to snap.
View 2 Replies View Relatedif i'm using polyline it doesnät show any snap points?
View 9 Replies View RelatedI'm using AI CC now, but I noticed this problem in earlier versions of AI: If I want to place a one-word label on an illustration I move the type insertion cursor to a speific point on the screen image and click, but then the flashing insertion point, where the label will actually start, pops up elsewhere, usually a line or two above where the cursor was, and a pica or two to the left, forcing me to type the label, then move it into position rather than simply typing it in the right place and moving on. The problem is merely annoying, but I'd like to fix it. It's probably a matter of ignorance-I simply haven't read the right documentation, but I don't know what to call the problem. Where can I find out how to change the position of the cursor relative to the insertion point?
View 2 Replies View RelatedForm Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
View 3 Replies View RelatedSince switching over to Inventor 2012 I have been having trouble snapping to tangent points on a curve or circle to pull dimensions. I would do it manually but if the dimension is not referencing a specific point in the model it turns pink to identify an error.
Is there a setting that may be not allowing me to snap to tangent points?
For some reason we cannot snap to the node on several of our point symbols. I cannot see anything different when compared to the other point symbols that we can snap too. Basically if i try to draw a line of obtain a distance using the NOD osnap on these point symbols i get nothing, its like they dont have a NOD to snap too.
View 9 Replies View RelatedI must not be the only one required to produce 2d dwg's for work.
I'm using INV 2009 and our vendor swears up and down in 2012 every thing is fixed, which somehow I doubt since they failed to fix the conversion from idw to dwg in the previous 12-13 releases.
Anyways, my problem today is that the dimiension lines I spent so much time making them meet our industry and company standards in my idw are all wrong in the dwg's I saved.
(please see attached).
can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
Lines snap at an offset distance (0.0000274 m e.g.) from the actual point. What change of settings can resolve it?
View 2 Replies View Relatedhow to match up certain points. I have imported 2 point clouds and have tried to use the 'align' tool to specify three points from the source object (cloud) and three points from the destination object (cloud). When doing this, it does not properly align them. The point cloud makes it difficult to select the exact point I would like to align, since there may not be a point at that exact location, but close to it. Does AutoCAD require the points in alignment to match up perfectly or is it capable of doing a best fit?
Also, is AutoCAD capable of creating a solid 3D piece from the point cloud? I would like to take all of my points and make a smooth object.
I have two lines and I am wanting the end of one line's point to snap to the other line's end point. I've dragged the end point to exactly where the other one is but instead of correctly snapping to the end it sort snaps about 0.5px away from it - there's no way I can get it to snap correctly without it deciding to move away.
View 8 Replies View RelatedAutoCAD exchange or any books that are available on the web. Everyone simply says "here, it exists" but I can't find a description of what object snap enforcement is, nor have I managed to figure it out from its behavior in AutoCAD.
View 4 Replies View Relatedusing autocad 2013.
is there 3D object snap tracking?
I want to make a block which is visible to snap only on a special point, say pivot point.
View 7 Replies View RelatedI get inconsistent results when I try to use the object snap to a point such as an intersection in an xref. Sometimes it works and sometimes it does not. Even the "nearest" doesn't seem to recognize the xref consistently. Is there a way to insure that the point is recognized?
View 9 Replies View RelatedHow to use keyboard shortcut to allow for a temporary override of my "Nearest" OSNAP. I often find myself pulling leaders from splines and/or circles and need the "Nearest" OSNAP active.
I was in CUI and saw the temp override shortcut key was setup but inactive as it has no ties to any keys. I also saw others setup with shortcuts keys and decided to give them a demo. While in a line command (for example) i held 'SHIFT + C' to trigger the temp override of "Center." It didn't seem to work. Dynamic input popped up as if i was entering "C."
I want 'SHIFT + N' to be temp override for "Nearest" OSNAP.As a side note, i was able to set up ACAD to zoom extents and close dwg simultaneously with 'CTRL + W' without any hiccups.
When using object snap feature, if a particular point has multiple roles, by which I mean it could be {endpoint, node point, circle, intersection, etc.} at the same time, is there a way to toggle the snap point selection?
mt.png
For example, does there existKey or key combination 1: Change the object snap mode to “single” amongst all enabled modes. Key or key combination 2: Iterate one by one through all available modes.
tg.jpg
I no longer seem to be able to snap to the nodes of block attributes.
My osnap settings are set to snap to nodes. I wonder whether it's a variable that on my previous version of AutoCAD was set to one thing and the new version defaults to another.
I love the feature of Object Snap Tracking but for some reason or another it has stopped working. I normally use F11 to turn it on or go through the drafting settings menu to turn it on. The Object Snap Tracking box is checked and should work, but it doesn't. Is there a magic variable that needs to be set?
View 2 Replies View RelatedHow do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg