AutoCad :: No Snap Point With Polyline?
Mar 15, 2012if i'm using polyline it doesnät show any snap points?
View 9 Replies
ADVERTISEMENT
AutoCad 2D :: Snap Polyline To A Point
Jan 21, 2014I used the measure command to place points along a polyline. I'd like to draw a poly from the points that were created. I can't seem to snap to those points. I don't see anywhere to get the osnaps to snap.
View 2 Replies View RelatedAutoCAD Map 3D :: Use Snap To Draw Water Mains From Point To Point?
May 31, 2012I am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies View RelatedAutoCAD Civil 3D :: Draw Polyline From Point To Point Using Imported Points?
Aug 16, 2013Im still new to Civil 3D and i would like to know how to connect inported points using 3D polylines. I imported my points from Excel in a PNEZD format. How do i get the 3d poly line to snap to my points so I can Connect them? someone mentioned using a feature line to connect the points but im not sure how or what that would do.
View 3 Replies View RelatedAutoCad 2D :: Snap Not Working After Drawing Polyline
Jul 17, 2012After I drawn a Polyline or rectangle, I wasn't able to Snap the Object. So measuring was a hard thing to do.I found a solution to this bug: Disable the Linetype Generation. After that snapping will work again.
This problem occurred out of nowhere. It always worked without changing the linetype generation.
AutoCad :: Create A Block So That The Base Point Is The Only Snap Point On The Block?
Aug 22, 2013is it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
AutoCAD 2010 :: Can't Snap To Intersection Point
Jul 10, 2012Form Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
View 3 Replies View RelatedAutoCAD Inventor :: Snap To Tangent Point
Apr 4, 2012Since switching over to Inventor 2012 I have been having trouble snapping to tangent points on a curve or circle to pull dimensions. I would do it manually but if the dimension is not referencing a specific point in the model it turns pink to identify an error.
Is there a setting that may be not allowing me to snap to tangent points?
AutoCAD Civil 3D :: Can't Snap To Point Symbols
Feb 24, 2011For some reason we cannot snap to the node on several of our point symbols. I cannot see anything different when compared to the other point symbols that we can snap too. Basically if i try to draw a line of obtain a distance using the NOD osnap on these point symbols i get nothing, its like they dont have a NOD to snap too.
View 9 Replies View RelatedAutoCad :: Snap Point Type Of Object?
Sep 7, 2011Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replies View RelatedAutoCAD Inventor :: Save As To DWG Changes Snap Point Of Dim Line To CLs
Dec 9, 2011I must not be the only one required to produce 2d dwg's for work.
I'm using INV 2009 and our vendor swears up and down in 2012 every thing is fixed, which somehow I doubt since they failed to fix the conversion from idw to dwg in the previous 12-13 releases.
Anyways, my problem today is that the dimiension lines I spent so much time making them meet our industry and company standards in my idw are all wrong in the dwg's I saved.
(please see attached).
AutoCAD Inventor :: Turned Off Snap To End Point In Sketch Mode?
Oct 19, 2011Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
AutoCAD 2013 :: How To Set User Coordinate To Always Start In Last Snap Point
Jan 9, 2014Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
AutoCAD .NET :: Get Point On Polyline
Jan 31, 2013I have a line polyline and point1 (outside polyline) . I want to define a point2 (on polyline ) aligned or perpendicular with polyline. What method to use?
View 1 Replies View RelatedAutoCAD 2010 :: Using Break Switches Off Snap (Grid) For First Selected Point
Oct 6, 2011I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
AutoCad 2D :: Lines Snap At Offset Distance (0.0000274 M) From Actual Point?
Aug 22, 2011Lines snap at an offset distance (0.0000274 m e.g.) from the actual point. What change of settings can resolve it?
View 2 Replies View RelatedAutoCAD .NET :: How To Set Polyline Start Point
Aug 12, 2012I tried to set Polyline.StartPoint to new position (Point3d):
Polyline.StartPoint = myNewPoint3d;
I have "not implemented" exception.
Also, I tried to do it as:
var seg0 = acEnt.GetLineSegmentAt(0);
seg0.Set(newPoint3d(0, 0, 0), seg0.EndPoint);
It doesn't work also. I can do it as:
acEnt.SetPointAt(0, my2dPoint);
But it's 2D point, not 3d
Of course I can remove polyline and create it again, but. How to set start point correctly for 3d point?
AutoCAD .NET :: How To Get A Point In Polyline With Set Distance
Oct 23, 2013How to get a point in the polyline with a set distance and obeying my current ucs. A projection of the point as an orthogonal snap.
I wrote a code creating a polyline between the lowest and the highest initial polyline and obtaining the intersection. But when it comes to many points the rendering is quite time consuming.
AutoCAD Civil 3D :: Create Point From A Polyline
Aug 14, 2013I want to create points from the polyline to identify in the field. For example, I create a square for a concrete pad and I want to identify the corners of the pad.
View 4 Replies View RelatedIllustrator :: Does Not Snap To Point
Nov 7, 2013I have two lines and I am wanting the end of one line's point to snap to the other line's end point. I've dragged the end point to exactly where the other one is but instead of correctly snapping to the end it sort snaps about 0.5px away from it - there's no way I can get it to snap correctly without it deciding to move away.
View 8 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Make Block Which Is Visible To Snap Only On Special Point
Dec 27, 2011I want to make a block which is visible to snap only on a special point, say pivot point.
View 7 Replies View RelatedAutoCAD .NET :: Create Polyline With Insertion Point Prompt
Mar 13, 2012I've been going through some examples on [URL] to create polylines and i've managed to make some code run. One thing that I can't seem to find information on though, is how to use the default AutoCAD command line options in my code. For instance, I would like to be able to prompt the user whether they would like to snap the polyline to an insertion point, everytime they create a new verticie.
Below is some example code from the site that i'm working from:
namespace MyPlineApp
{
public class MyPlineCmds
[Code].....
AutoCAD .NET :: Detect If Selected Point Of Polyline Is Its Vertex?
Feb 10, 2012I would like to know if there is any way to detect if selected point of the selected polyline is its vertex?
1. The user is drawing rectangle or any other figure with polyline.
2. Entering command "GetMe".
3. Selecting polyline.
4. Selecting point.
Is there any built-in function in Autodesk's API?
AutoCAD .NET :: How To Find The Start / End Point Of Polyline With Program
Jun 6, 2013I draw 3 lines to form an open polyline. They are still in lines, not converted into a polyline.
How do I find the start or end point of the polyline with program? I am thinking to check all points which is not shared by two lines.
AutoCAD 2013 :: LISP For Placing A Point On Polyline
Feb 16, 2013i need a lisp routine for a situation like this:
I have a polyline consisting of various point intersections, total length of polyline is around 600m. I want to place a point along this polyline at some distance e.g. 50m.
AutoCAD .NET :: Offset Polyline By Pick Point On Side?
Feb 3, 2013how to offset a opened polyline by pick point on side of opened polyline.
View 3 Replies View RelatedPhotoshop :: 3D Type Not Snap To Vanishing Point?
Feb 21, 2013how to snap 3D text to a defined vanishing point. Seems pretty straight forward but it does not seem to be snapping to the plane I defined?
Video:[URL]...
AutoCAD Visual LISP / AutoLISP :: Angle Of Polyline Segment At Specified Point
Mar 19, 2013I am writing a routine that will place a piece of text at a specified point along a polyline. My problem is to determine the angle for the text. It needs to be the same as the segment of the polyline that it falls on. Just can't get my head around how to get that angle?
I can get a list of the vertex point of the polyline, but how do I determine the segment the point falls on?
AutoCAD Visual LISP / AutoLISP :: Draw Polyline Which Point From Sub-entities Possible?
Jun 28, 2013I continue learning....
(setq ins (vlax-ename->vla-object ( ssname sele cod)) nombre (vla-get-name ins) ) (setq bloque1 (vla-item (vla-get-Blocks (vla-get-Document ins) ) nombre ) ) (setq s_ent1 (vla-item bloque1 1)) (setq pt1 (vla-get-startpoint s_ent1 ))(setq pt2 (vla-get-endpoint s_ent11 ))(setq s_ent2 (vla-item bloque1 2)) (setq pt3 (vla-get-startpoint s_ent2 ))(setq pt4 (vla-get-endpoint s_ent2 ))(command "_pline" pt1 pt2 pt3 pt4 "c")
Why dont draw de _pline?
Revit :: Unable To Snap To Point Cloud Work
Mar 19, 2012I'm trying to use a point cloud in Revit, and I can't make Snap to Point Cloud work.
The "Snap to Point Cloud" box in Manage/Snaps is checked, but there is no snap available when I eg. try to insert a wall in plan view.
I use Revit Architecture 2012, Build 20110916_2132(x64) Update Release 2 with Point Cloud Hotfix installed. The point cloud is indexed in Revit from a .pts file.
Illustrator :: Snap Object Reference Point To Grid?
Jun 15, 2012How can I snap the center of an arbitrary symmetrical object to the grid? For instance the center of a circle or rectangle. According to this discusssion it's not possible: [URL]
How can I define a reference point in an arbitrary object or in a group of objects and snap this to the grid?