AutoCAD Inventor :: Save As To DWG Changes Snap Point Of Dim Line To CLs
Dec 9, 2011
I must not be the only one required to produce 2d dwg's for work.
I'm using INV 2009 and our vendor swears up and down in 2012 every thing is fixed, which somehow I doubt since they failed to fix the conversion from idw to dwg in the previous 12-13 releases.
Anyways, my problem today is that the dimiension lines I spent so much time making them meet our industry and company standards in my idw are all wrong in the dwg's I saved.
(please see attached).
View 1 Replies
ADVERTISEMENT
Apr 4, 2012
Since switching over to Inventor 2012 I have been having trouble snapping to tangent points on a curve or circle to pull dimensions. I would do it manually but if the dimension is not referencing a specific point in the model it turns pink to identify an error.
Is there a setting that may be not allowing me to snap to tangent points?
View 1 Replies
View Related
Oct 19, 2011
Inventor 2010
Some how I turned off the snap to end point in the sketch mode. where is the dialog box to control snap settings
View 2 Replies
View Related
May 31, 2012
I am working on a utility map with water valves and hydrants. I collected my points with a Trimble unit and converted them to shape files. I am unable to snap to these points, how i can use snap to draw my water mains from point to point?
View 5 Replies
View Related
Nov 26, 2012
When I use a tool such as 'move'/'select base point' in the sketch environment, I used to be able to select line midpoints.
Is this no longer possible? My constraint options seem to be fine.
Recently upgraded to 2013
View 6 Replies
View Related
Apr 19, 2011
I'm not sure what i changed but when im trying to sketch a line usually the little cursor turns from yellow to green when it snaps to an edge or a center. but its not snapping, how to get my line snap back.
View 8 Replies
View Related
Aug 22, 2013
is it possible to create a block so that the base point is the only snap point on the block?
In other words supose I have a block of a simple rectangle with the base point in the center.
If I try to snap to the block, I will be able to snap to all the corners, but not the base point. I know that i can put a point at the base point, but can I turn off the snap to the corners (just for the block) in other words, have an object that is unsnapable to without turning the snap mode off.
View 7 Replies
View Related
Jan 21, 2014
I used the measure command to place points along a polyline. I'd like to draw a poly from the points that were created. I can't seem to snap to those points. I don't see anywhere to get the osnaps to snap.
View 2 Replies
View Related
Mar 15, 2012
if i'm using polyline it doesnät show any snap points?
View 9 Replies
View Related
Nov 23, 2012
I have an assembly with a curved line made in a sketch, and a part with a point in the bottom.
I want to constrain the point to the curved line, but the regular Constrain options wont let me do so.
I am making an animation with Inventor Studio, so I need this constrain, so I later on in studio can manipulate it and insert the first part into the other.
View 2 Replies
View Related
May 25, 2012
Does SDK have two line Intersect Point?
View 3 Replies
View Related
Apr 5, 2013
I am trying to create a workplane by a point and a line. I can do this maually, but have not been able to reproduce this in code.
BTW: I realize I can create a fixed workplane by using the point, the edge, and an edge perpendicular to the edge, but I cannot have this as a fixed workplane.
View 6 Replies
View Related
Jul 10, 2012
Form Autocad 2000 to 2012, there is always with this problem. It happens sometimes in object snap, it does not work to snap a intersection point (two crossed lines) when drawing a line or arc or others. For sure, these two lines are in the same plan and can be filleted or chamfered. So I turned on the Apparent intersection, it works with apparent intersection point, I am not sure if this apparent intersection will cause other problem. I am working on pure 2-D drawing, do not want to get any 3D objects inside the drawing.
View 3 Replies
View Related
Feb 24, 2011
For some reason we cannot snap to the node on several of our point symbols. I cannot see anything different when compared to the other point symbols that we can snap too. Basically if i try to draw a line of obtain a distance using the NOD osnap on these point symbols i get nothing, its like they dont have a NOD to snap too.
View 9 Replies
View Related
Sep 7, 2011
Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replies
View Related
Aug 31, 2011
I have to create a hole (extrude) in a wall part in my assembly document where a stack will be installed.
To determine where, I verify if a line segment pass through the wall (XY Plane).
But I get an error with the command: IntersectWithLine
Here's my
Public Function IntersectionPoint(ByVal app As Inventor.Application,
ByVal wp As Inventor.WorkPlane) As Inventor.Point
Dim oTransGeom As Inventor.TransientGeometry = app.TransientGeometry
Dim startPoint As Inventor.Point = oTransGeom.CreatePoint(Me.StartVertex.X,
[Code] ......
View 2 Replies
View Related
Jan 9, 2014
Before when I was creating models the origin (0,0,0) was always set in the snap point i started the line in. Now suddenly something happend and now 0,0,0 is always starting in the Original XYZ point.
How do I get back to the old settings?
View 6 Replies
View Related
Jun 9, 2011
I'm trying to draw a plan of my house in Autocad 2009 but I seem to be endlessly using trim and extend because I can't easily select the points that I want with osnap. Eg. imagine I have a box, and I want to start drawing another box inside it that has each side as 10 units smaller than the corresponding side on the outer box.
Step 1 - I draw a small line from the top left corner of the big box using the endpoint snap, typing in "5" for the length.
Step 2 - I then do the same at right angles to the first line to get me to the starting point of the inner box. This always leaves me with 2 small lines to remember to delete.
Step 3 - Then in order to draw the top line of the inner box I end up drawing to a random length because I can't say "draw until 5 units away from the right hand side of the big box", then I end up trimming it later once I've repeated steps 1,2 and 3 for the next side of the inner box.
I know in my example above I could have scaled the box down or something but that's not what I'm getting at. I really want a way of selecting line start and end points that are a known position away from an existing point.
View 9 Replies
View Related
Oct 6, 2011
I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
View 5 Replies
View Related
Aug 22, 2011
Lines snap at an offset distance (0.0000274 m e.g.) from the actual point. What change of settings can resolve it?
View 2 Replies
View Related
Jun 20, 2012
My current code consists of a simple line to save my .idw that is produced as a .PDF.
_invApp.ActiveDocument.SaveAs(CurrentDirectory &"Submittal_Sheet_0" & drawing_count & ".pdf", True)
Within Inventor, if you select Export --> PDF, you can select an option that disregards the lineweights set in the drawing. How to set it up in VB to do that?
View 9 Replies
View Related
Nov 7, 2013
I have two lines and I am wanting the end of one line's point to snap to the other line's end point. I've dragged the end point to exactly where the other one is but instead of correctly snapping to the end it sort snaps about 0.5px away from it - there's no way I can get it to snap correctly without it deciding to move away.
View 8 Replies
View Related
Aug 19, 2013
I need to snap to guide lines but the only snap I can get is to the endpoint, which results in some very diagonal lines. I actually have ortho turned on because I need only 90 degree angles. Sometimes I need to move an entire line and I would like it perfectly lined up to the guideline. The line being moved is part of a polyline.
I sometimes do need to start or end at an endpoint but how do I do that then also snap to just anywhere on the guideline while maintinaing a 90 degree angle?
View 2 Replies
View Related
Aug 16, 2011
tan.jpg
i want to snap this line to where it would be at a tangent to the arc (as right), but as you see (left) when i hover with TAN snap it picks a tangent from the pick point, not from object's orientation.
at the moment i construct a tangent by rotating a copy of my line by 90°, and snapping it to centre of the arc. then extend out past arc, where the intersection is now the point i originally wanted to pick. make sense? gotta be a better way!
View 9 Replies
View Related
Dec 27, 2011
I want to make a block which is visible to snap only on a special point, say pivot point.
View 7 Replies
View Related
Dec 24, 2011
Everything is on one layout/sheet.
Currently there are a total of 3 viewports in an L formation. The fourth viewport, will go in the upper right. But first, I have to get these aligned.
I think the viewports themselves are fine enough. The problems arise because the model is in Model space so, construction line (as far as I can tell) didn't want to snap to a line, (on the model,) in Paper space.(vertical or horizontal) So, I can only see the construction line, in one viewport at a time. Which means, the construction line is not visible in the viewport immediately to the left. So, I can't extend the construction line across both viewports, to to snap them to the construction line.
View 9 Replies
View Related
Oct 9, 2013
When trying to place a construction line through an intersection the line offsets depending on where the cursor is placed. When the on screen prompt ask to specify through point. It defaults to 0 and I enter in 45'. It comes back invalid. believe this is a snap setting somewhere but I cant seem to find it.
View 2 Replies
View Related
Nov 21, 2012
I have autocad 2011.I am trying to get my autocad to snap to the closest line.
I draw a pline at a 45 degree angle. I press enter and I click the starting point again (in this instance the bottom point) and I draw another line near the other one, the nearest snap indicator shows up, but when I type "2" (units in Meters) and press "enter" the line is drawn where the cursor is and not along the 45 degree angle.
My goal is to get the second line to follow the first line with a different length.
View 6 Replies
View Related
May 12, 2011
How do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
View 3 Replies
View Related
Sep 30, 2013
I have a line or a pline segment and i want to start a line from a point laying there and go perpendicular outwards. Is there a way to do it with tracking?
Yes, i saw the command draw line at an angle but i find it a little bit complicated for a simple task like that. I am sure autodesk have a simplest solution about that.
If i am already at the draw line mode and i can easy catch the tracking perpendicular to previous segment but if i want to start from another line and go perpendicular i cannot make the tracking work.
View 9 Replies
View Related
Feb 21, 2013
how to snap 3D text to a defined vanishing point. Seems pretty straight forward but it does not seem to be snapping to the plane I defined?
Video:[URL]...
View 2 Replies
View Related
