AutoCad :: Object Snap Toolbar In 2011 LT?
May 9, 2011I am looking for the perpendicular function specifically. However, at this point I can not find the tool bar for any of the snap functions.
View 3 Replies
ADVERTISEMENT
AutoCAD 2013 :: How To Display Object Snap Toolbar
Aug 8, 2012I just switched from Autocad 2007 to 2013. how to display the object snap toolbar? the one with center snap, mid-point snap, etc options?
View 3 Replies View RelatedAutoCAD Architecture :: Get TOOLS And Object Snap Toolbar?
Jan 2, 2013I am trying to get TOOLS and the object snap toolbar up but my menu bar only has FILE WINDOW.
View 3 Replies View RelatedAutoCad 3D :: Object Snap Doesn't Snap At Intersection?
May 6, 2012Object Snap.jpg I want to pick the point where the circle hits the edge of the box but there seems to be no Intersection there. But they are on the same plane!
View 9 Replies View RelatedAutoCAD Architecture :: Unable To Snap To Walls In 2011
Apr 28, 2010After upgrading to ACA 2011 in plan view I am unable to snap to the edges of walls. Toggling the osnap setting check box to allow object snap to act on wall justification lines seems to have no effect as it always snaps only to the justification line and to nothing else. This is extremely annoying and makes it impossible to dimension to the face of a wall that is center justified. Is this a bug or am I missing some new setting somewhere? All my layers are unfrozen including layer 0.
View 9 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Possible To Pull Out Coordinates From Object When Object Snap Applied?
Aug 29, 2011I have a rather simple 3rd party custom object... I tried to get its bounding box but the coordinates that come back don't seem to relate at all to the object.
What I'd like are the coordinates of two nodes the object contains...
Is it possible to apply the autocad cursor in some why with the node object snap to get their coordinates?
3ds Max :: How To Snap One Object To Other With Vertex Snap
Apr 18, 2011I'm trying to snap one object to the other with vert snap.
It's trying to snap from the center of my object rather then the vert I am hovering over. In the Snap settings I have only "vertex" checked so it should snap to whatever vertex I hover over but no...This keeps up I'm going back to 2008 when all this worked fine.
3ds Max Modeling :: Can Snap Object / Vertex / Edge To Another Object Straight In One Axis
Jan 4, 2012can I snap an object/vertex/edge to another object straight in one axis?
I'm coming from Rhino 3d, where this is possible by holding the shift key.
3ds Max 2012 SP2
i7 2600
16GB RAM
Geforce 560ti OC
AutoCAD LT :: Object Snap Enforcement
May 29, 2012AutoCAD exchange or any books that are available on the web. Everyone simply says "here, it exists" but I can't find a description of what object snap enforcement is, nor have I managed to figure it out from its behavior in AutoCAD.
View 4 Replies View RelatedAutoCad :: 3D Object Snap Tracking?
May 24, 2013using autocad 2013.
is there 3D object snap tracking?
AutoCAD LT :: Object Snap To Xref Intersection
Oct 10, 2009I get inconsistent results when I try to use the object snap to a point such as an intersection in an xref. Sometimes it works and sometimes it does not. Even the "nearest" doesn't seem to recognize the xref consistently. Is there a way to insure that the point is recognized?
View 9 Replies View RelatedAutoCad 2D :: Object SNAP TEMP Overrides
Feb 13, 2013How to use keyboard shortcut to allow for a temporary override of my "Nearest" OSNAP. I often find myself pulling leaders from splines and/or circles and need the "Nearest" OSNAP active.
I was in CUI and saw the temp override shortcut key was setup but inactive as it has no ties to any keys. I also saw others setup with shortcuts keys and decided to give them a demo. While in a line command (for example) i held 'SHIFT + C' to trigger the temp override of "Center." It didn't seem to work. Dynamic input popped up as if i was entering "C."
I want 'SHIFT + N' to be temp override for "Nearest" OSNAP.As a side note, i was able to set up ACAD to zoom extents and close dwg simultaneously with 'CTRL + W' without any hiccups.
AutoCad :: Iterate Through Object Snap Modes?
Aug 16, 2011When using object snap feature, if a particular point has multiple roles, by which I mean it could be {endpoint, node point, circle, intersection, etc.} at the same time, is there a way to toggle the snap point selection?
mt.png
For example, does there existKey or key combination 1: Change the object snap mode to “single” amongst all enabled modes. Key or key combination 2: Iterate one by one through all available modes.
tg.jpg
AutoCad :: Block Attribute Object Snap
Jan 4, 2012I no longer seem to be able to snap to the nodes of block attributes.
My osnap settings are set to snap to nodes. I wonder whether it's a variable that on my previous version of AutoCAD was set to one thing and the new version defaults to another.
AutoCad :: Object Snap Tracking Not Working?
Feb 18, 2009I love the feature of Object Snap Tracking but for some reason or another it has stopped working. I normally use F11 to turn it on or go through the drafting settings menu to turn it on. The Object Snap Tracking box is checked and should work, but it doesn't. Is there a magic variable that needs to be set?
View 2 Replies View RelatedAutoCad :: Snap Of New Line To Edge Of Another Object
May 12, 2011How do I snap my new line to the edge of another object? A workaround is drawing the line over the object, and snap the point back using intersection snapping. I hope you understand.
drawing.jpg
AutoCad :: Snap Point Type Of Object?
Sep 7, 2011Using AutoCAD from another drafting program and trying to determine if AutoCAD has a feature I have become used to. The program I am using is Vectorworks and they have these items called loci. They are basically just snap points that do not print and are not actually geometry. They are great though for aligning items and referencing points. Is there a similar item in autocad?
View 1 Replies View RelatedAutoCAD 2013 :: Cannot Specify Points On Or Near Arcs With Object Snap On
Dec 10, 2012Using AutoCAD Civil 3D 2013, now installing Service Pack 1 (kept crashing, this time it's working though), and I'm trying to find the area of a pathway that I've drawn in 2D with standard lines. Using the area tool, I want to find the area of the path, but it arcs around a 180 degree corner. I tried getting a rough estimate of the area by clicking at several points along each of the arcs, but after clicking a point where the arc joins the straight line of the straight section of the path, it literally won't let me click the next point. I can, however, specify the next point as long as it's nowher near the arc. Same goes for the polyline tool.
Just got an error code for the Service Pack installation, too. "A problem prevented the service pack from being installed, contact your administrator. Error 1603"
AutoCAD 2010 :: Dynamic Snap / Object Select?
Mar 8, 2012As I move my cross hairs over an object in a drawing it wants to select or highlight the object without clicking on it. On detailed models/drawings it takes alot of time and is almost impossible to use. Is there a way to turn or toggle this function off?
View 2 Replies View RelatedAutoCAD .NET :: Modify Object-snap Points For Blocks?
Apr 16, 2013In my application, users will insert predefined blocks which have simple shapes like rectangle,square or circle.
Users will connect some polyline or lines to the blocks inserted. My task is that blocks must have snap points only on their center so that the polylines must be connected to the block center point not to other points such that midpoints, end points of the edges.
I wonder if there is a way to override snap points of the blocks while other entities' snap points do not change.
AutoCAD 2010 :: Object Snap Settings Will Not Stay Set?
Dec 21, 2012My Object Snap settings will not stay "set". Each day i have to reset the options i wish for each dwg i open up that day. also the settings do not stay set even when working on same dwg for several hours. Every couple hours i have to reset them to my options.
View 2 Replies View RelatedAutoCad 2D :: Object Snap Tracking - Use Distance Not Coordinates
Sep 11, 2013Having trouble with object snap tracking. At times i am given distances from other objects to work with- which is what i am after.
However in some instances only the model space coordinates are displayed- not distances. Is there any way to ensure that only distances appear?
AutoCAD Inventor :: Object Snap Settings In Ordinate Dimensions?
Jan 9, 2013We use ordinate dimensions for all holes in parts. Unfortunately there seems to be features frequently left out of ordinate dimension mode. For instance, by default Inventor uses center and quadrant object snaps. Unlike in normal dimension mode, there is no right click option for disabling quadrant snaps. This is a constant annoyance, especially when dimensioning a print with a lot of holes. Is there any other way or hidden setting to disable the quadrant snap? In addition, add member is missing from the new "marking menu" completely so we have to enable the old right click menu to get it back. Are we the only ones using ordinate dimensions?
Inventor 2013 SP1.1 update 1
AutoCAD 2010 :: Doesn`t Recognize The Object Snap Commands
Apr 23, 2012The problem is that AutoCAD 2010, does not recognize any object snap commands, all the other comands work just fine.
I have reinstalled the program and don´t work.
What could be?
AutoCAD Architecture :: Insert Space Turns Off Object Snap
Jan 11, 2013When using the 'space generate' option when inserting a space, the tool automatically turns off 'object snap' and then of course it doesn't turn it back on at the end of the operation. I tend to need to switch back and forth from auto generate to polygonal insertion and having to reset object snap every time.
View 3 Replies View RelatedAutoCAD 2013 :: Dynamic Input Interrupts Object Snap?
May 21, 2013I am having this problem for the first time with my most recent install of 2014 on a Windows 8 computer. When copying a line or any other object along another line as a base, when I type the distance that I want to copy the object, it deselcts the autosnap vector that I had specified. For example, now when I copy an object along a line at various intervals, I have to move my mouse after entering the distance each time to enable the object snap to reselect the direction I want to copy it (along a line that should stay selected through the object snap: nearest).
Is there some object snap or dynamic input setting that I need to change?
AutoCAD .NET :: Call COM Object From 2011?
Jul 22, 2012I tried to call COM object created by C# from other C# module.
I did:
1. Create simple COM object by C#
2. Register it
3. Try to call this COM from other C# console application - it works fine
4. Create simple AutoCad module by C# with IExtensionApplication
5. Try to call this module from AutoCAD - it works
6. In Initialize() method I wrote:
Type myClassAdapterType = Type.GetTypeFromProgID("CoreAdapter.CoreAdapterClass");
acDoc.Editor.WriteMessage("Type is OK: {0}", myClassAdapterType.FullName);
object myClassAdapterInstance = Activator.CreateInstance(myClassAdapterType);
acDoc.Editor.WriteMessage("Created");
6. Open AutoCAD again
7. Load my module
8. I saw "Type is OK" (becase it was registered in registry)
But I can't create instance.
AutoCAD Architecture :: Mid Between Two Points Object Snap Is Not Appearing In The Shortcut Menu
Dec 13, 2011One of the CAD engineer in my office is facing with a new problem. Until two days back she was able to use the "mid between two points" object snap. But recently it dissappeared from the shift+right click short cut menu. method to bring it back to the shortcut menu?
Sunilkumar
Formshore
CALICUT
AutoCAD 2010 :: Drawing Object - Snap To Elevation Of Contour Line
Dec 12, 2013Is there a setting I can change so if I am drawing an object (line, polyline, etc.) if I am snapping to a contour line, the objects will NOT take on the elevation of the contour line?
View 3 Replies View RelatedAutoCAD LT :: 2011 Mep Object Enabler Not Installing
Sep 27, 2010I am having trouble installing the "AutoCAD Architecture-MEP Object Enabler for AutoCAD LT." Whenever I try to install it, I immediately get a screen that says, "Setup was unable to detect any target applications for AutoCAD Architecture-MEP Oblject Enabler for AutoCAD LT." I have tried restarting the computer, running the install program with LT on and off, etc.
View 9 Replies View RelatedAutoCAD VB :: Create Object For 2011 / 2012?
Jul 19, 2011i'm using the following code (generic) to interface with AutoCAD; not including the version because my company upgrades every year...
Private AutoCAD_Instance As Object
AutoCAD_Instance = CreateObject("AutoCAD.Application")
When I try to run this, I get an error 'Unable To Create ActiveX Component'...
