I am having trouble installing the "AutoCAD Architecture-MEP Object Enabler for AutoCAD LT." Whenever I try to install it, I immediately get a screen that says, "Setup was unable to detect any target applications for AutoCAD Architecture-MEP Oblject Enabler for AutoCAD LT." I have tried restarting the computer, running the install program with LT on and off, etc.
View 9 RepliesI am not seeing a oe for raster design for Map 3D 2011. We need to attach ECW ortho images.
View 2 Replies View RelatedI've been trying to get the Raster Design Object Enabler for Civil 3D 2011 64 Bit to install, but every time I run the exe it says there is no target application to be found, even though Civil 3D 2011 64 Bit is quite clearly installed on the machine.
View 8 Replies View RelatedWe have AutoCAD 2014 and 2012 currently in our office. We have a civil file that works perfectly fine with 2014 (we usually save all files down to 2010 so all our consultants can use them). When we open it in 2012 the object enabler does not seem to work only showing empty boxes with AceeLand90 text in the lower left hand corner. The civil object enabler on 2012 is up to date and the drawing was saved down to 2010. Not sure what I am missing and why it doesn't wort to have the Acee Entities shown in 2012.
View 6 Replies View RelatedI've been having issues recently installing Object Enabler for AutoCAD Civil 3D 2012 on a few machines. I downloaded the installer from the AutoDesk website, but when running, it comes up and says it can't find any install of Civil 3D 2012..
Currently have AutoCAD Civil 3D 2010 and it's object enabler installed... Also have AutoCAD Civil 3D 2012 installed but can't get the OE to install for it. Running the 64bit shows nothing to install to, and the 32 bit installation only shows an option for "Language Pack".
I am using Autocad 2013 on a 64bit PC.
I saved and run the Civil OE 64Bit. All the items shown have been selected and installed.
I can only see squares when I open a drawings that comes from the civil engineers.
I have an Object Enabler question... is there anyway to temporily disable them - but without Programs And Features > Uninstall?
I know that most enablers add an entry in Appload. What about a button that unloads the enabler if its name can be determined?
I recently installed Autocad 2014 with Carlson Survey 2014. When I use Etransmit or file conversion i get a Fatal Error. when i uninstall the civil 3d object enabler, the problem goes away, but i need the object enabler and i need to convert files. Is this not a major issue that Autodesk would consider important enough to address, or is the object enabler minor in comparison to other issues?
View 4 Replies View RelatedI am trying to install the student version of autodesk inventor 2011, and I'm using the default installation settings. The installation aborts when installing C++ and this is the message I get in the install log:
2011/1/9:17:36:18 Bobby Porwal NP-CHU === Setup started on NP-CHU by Bobby Porwal ===
2011/1/9:17:38:56 Bobby Porwal NP-CHU Install Microsoft Visual C++ 2008 SP1 Redistributable (x86) Failed Installation aborted, Result=1603
I get an error now after instaling Inventor 2012 when I am using 2011( because of a project with other users I am on).
I get this error.
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
when the Prosteel Object Enabler for AutoCAD 2013 will be available.
View 4 Replies View RelatedTrying to utilize a .sid file within Standard AutoCAD 2013, all suggestions point to an Object Enabler but notice that for 2013 all are for Civil 3D, Plant...
Is there an object enabler for Standard 2013?
I tried to call COM object created by C# from other C# module.
I did:
1. Create simple COM object by C#
2. Register it
3. Try to call this COM from other C# console application - it works fine
4. Create simple AutoCad module by C# with IExtensionApplication
5. Try to call this module from AutoCAD - it works
6. In Initialize() method I wrote:
Type myClassAdapterType = Type.GetTypeFromProgID("CoreAdapter.CoreAdapterClass");
acDoc.Editor.WriteMessage("Type is OK: {0}", myClassAdapterType.FullName);
object myClassAdapterInstance = Activator.CreateInstance(myClassAdapterType);
acDoc.Editor.WriteMessage("Created");
6. Open AutoCAD again
7. Load my module
8. I saw "Type is OK" (becase it was registered in registry)
But I can't create instance.
i'm using the following code (generic) to interface with AutoCAD; not including the version because my company upgrades every year...
Private AutoCAD_Instance As Object
AutoCAD_Instance = CreateObject("AutoCAD.Application")
When I try to run this, I get an error 'Unable To Create ActiveX Component'...
When I select an object to move I am unable to snap to the grips of the object or any other object close or any intersections. I have double and triple checked my osnap settings. Also, If I select a circle to move I am unable to select the center of the circle through additional osnap settings. One last issue, If I select an object and do a copy with base point command, I am unable to select a definitive base point. No grips or intersections show up.
My co-workers are able to do these functions but I am not.
I am looking for the perpendicular function specifically. However, at this point I can not find the tool bar for any of the snap functions.
View 3 Replies View RelatedA co-worker tells me when he opens a drawing then minimizes it and then opens a new drawing to fiddle around with, when he closes it and doesn't save and returns to the first drawing, when he runs commands he gets "No Null Object" errors. He can click OK or whatever on the error messages and continue, but they constantly fly in his face.
He's running AutoCAD 2011 Maps 3D x32 on Windows 7 x64.
I've created a Inventor 2011 Add-In using VB.Net with VS2008.
This add-in does all kinds of things, but it will not release some documents.
Well I don't know that for shure but it looks like that.
We use Productstream Pro and when changing state of a document it says the document is in use while there are no documents visibly open in Inventor. This only occures when I use my add-in.
Exact steps: Load drawing document from PSPPerform action with add-in which gets a custom iProperty from the Part file used on the Drawing and fills the display name of the Drawing with itSave the drawingClose the drawingIn PSP try to change state of the part file used on the drawingGet message from PSP stating the part is in use
In my code I've tried some things to prevent this behavior but non of them work.
I've tried:
Setting unused objects to "= Nothing"Releasing objects using "Marshal.ReleaseComObject(obj)"Calling "m_inventorApplication.CloseAllUnreferencedDocs()" and "System.GC.Collect()" on the "m_appEvents_OnTerminateDocument" event.
I've upgraded to Inventor 2013, removed 2012 and I want to install Feature Recognition enabler for 2013. It wont install because it says an older version of the add-in exisits. Control Panel won't uninstall it becasure it says Inventor not installed. any thoughts on how to remove the old version of feature recognition?
View 5 Replies View Relatedwhere I can find and download a copy of Mesh Enabler add on for Inventor 2011?
Every link I try brings me to the same page to download it for 2013.
Is there an enabler to be able to view Plan 3D 2011 images in AutoCAD LT 2011, currently when opening images the lines are showing as block,
View 4 Replies View RelatedIs there any way to put the 2011 topobase and the 2011 ArcGIS plugin into 2012 or 2013? Seems such a shame just to lost all of that functionality.
View 2 Replies View RelatedI am trying to load Map 3D onto this computer. After downloading the Autodesk product from their web site which took hours I would like to try to get this guy up and running before I have to download it all over again.
I go thru all of the steps of the setup, enter the serial number and key code and get green checks to each of those fields. When installing the program it runs almost to the end and then I get a error 1406 message that says I don't have the use of this key? I bought this computer from a classmate and he did have a DWF viewer on it but I have deleted all of those files. The Map 3D guy still fails to load after clearing out all of the files. I have scouted around on the net and have seen posts where Autocad leaves some files running in the background. How I can get around this error code? I try to run the trial version that needs no serial or key number and the same error code appears.
I installed the 2013 version onto my windows 7 64bit and after the installation process I launch the program and it freezes and then says there is an error. I have unistalled and reinstalled twice now with no luck. I attached a screen shot of what is going on.
View 9 Replies View RelatedBoth workstations are Win7 64 bit, how to get the Materials & Appearance Browser to show up on the computer that it is missing from?
On one workstation I get the following menu
On the other workstation I get this
We just installed AutoCAD 2012 on a machine that was running 2006. (32 bit on Windows XP Pro).
We opened a file that was created in 2006 and the Text is missing from the file. I tried to create a new file and when I start typing text, nothing happens.
I installed the service pack update and hot fix and still doesn't work. I've tried re-booting and nothing happens. I tried to go in and migrate the tools from 2006 but it was already done.
note, that this has also been installed on another computer and everything worked fine.
We are instaling Windows 8 this evening and I am trying to export the settings from C3D/map 2011.1) Is it possible to export your setup, which would capture a screenshot, so thal your toolbars and menus that you have set can be imported into your 2011 re-install? 2) In Options the Profile "Export" is the setup for your File path defaults under "Options" "File"? 3) SYSDVLG will export all my default settings, which I can import into my initial "Drawing 1" after re-install?
View 4 Replies View RelatedFATAL ERROR: Unhandled Access Violation Reading 0x0020 Exception at b0ba4c12h
Ive looked around the forums and cant seem to find a solution. I was running AutoCad on Windows 8 just fine before...
I'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message.
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
how I can install the 'Other' library content into the Content Centre?
I need the Australian Standards content but I was unaware that it didn't install automatically when I installed Inventor software, and from what I've read it's contained in the 'Other' library which I was also unaware you needed to install.
How can I solve the problem without uninstalling/ reinstalling? I'm using the downloaded Student version.
I've read that the Error 1603 is just a windows error saying that installation failed. I'm trying to figure out why I cant get the content Center to install. I already have Autodesk Inventor 2011 installed on my machine and for whatever reason I accidently unchecked the install content center (this was some time ago). When I go back into the install and try to run it it doesn't work. now I dont have the DVD's but I copied the DVD files to my Computer onto a back-up hard drive. The DVD's have been since packed away. is the content center failing cause I'm running the setup from the Disk1zip and the content center Files are on Disk7zip or is something else interfering with my install?
View 1 Replies View Related