AutoCAD LT :: 2010 Crashes On Start-up (even After Installing Hotfix)
Oct 2, 2012
I'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message.
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
View 3 Replies
ADVERTISEMENT
May 25, 2011
I am trying to install the hotfix for 3dsmax 2012 and I keep getting this error. Could it be because I still have 2011 installed?
View 1 Replies
View Related
Feb 9, 2011
After installing autocad 2011 on one of our users workstation. we try to launch it and it crashes will opening.
View 9 Replies
View Related
Dec 6, 2012
After Installing Sp3 PSP X4 does not start. I only get Error message:
Error: Versions must match.
Master = 14.2.0.1
RC = 14.3.0.1
I tried to install it also on a Windows 7 computer with same result.What to do?
View 14 Replies
View Related
Feb 20, 2013
I'm facing an issue when I start up the AUTOCAD 2013 on Windows.
I clicked on Autocad icon, and a message is prompted saying "Unknown Property" with a yellow triangle with an exclamation mark inside it, and the software do not start up.
The highlights: Yesterday the software was working normaly when happened a black out. I started the computer again and keep working without any issue. Today when I would keep working on the project I couldn't start up the Autocad.
View 5 Replies
View Related
Dec 10, 2013
Is Kaspersky Anti-Virus interfering with Gimp start up??? ever since I installed Kaspersky Anti-Virus 2013, Gimp takes more than 20 minutes too start up, it searches for data files for more than 20 minutes straight before my image is opened in Gimp ever since Kaspersky was installed!
View 1 Replies
View Related
Sep 24, 2012
My version of PS4 that was working fine has stopped working, it crushes at start up. I clean installed the program several times but the result is the same.
View 6 Replies
View Related
Nov 1, 2013
I just installed the 12.1 update of After Effects, and now I can't open the program. When I try to start up AE, I get the error message:
After Effects warning: Could not rename the file '/Users/USERNAME/Library/Preferences/Adobe/After Effects/12.1/Workspaces. 773.1407350999826081.xml' to 'workspaces.xml'.
I just tried uninstalling and reinstalling AE. Same problem.
View 2 Replies
View Related
Jun 12, 2013
The file in question has rendered perfectly before but client requested a small change just before publication, so we have made the change but when rendering, Photoshop crashes.
I have tried the file on both my 27" iMac i5 with 24gbb ram, and my Macbook Pro Retina i7 with 16gb ram. The only fix I have found is to duplicate all layers to an ALREADY OPEN new file, save as a new name, quit PS then re-open the new file and render.
Here's the original file (53MB download):
[URL].....
View 4 Replies
View Related
Feb 9, 2013
My computer is running windows 7, 64 bit, and im running no plugins.
View 3 Replies
View Related
Nov 9, 2012
I was already having this problem with Max2012 and now it seems to be persisting in Max2013. I am basically getting regluar random crashes. There seems to be no one specific cause, I can be poly-editing, unwrapping even just renaming objects.
However the most common regular cause is simply clicking on the Max start icon on the top left of the screen, to open, save, import or whatever. When this happens as soon as I click on the icon Max closes, doesn't try to save the file and gives no error message. It seems to be more susceptible to doing this after Max has been idling for a while or the PC has been woken from sleep, but not ALWAYS.
My PC is relatively new, graphics cards are updated, motherboard etc. The only thing I haven't updated is the bios.Max SPs' also installed.
View 4 Replies
View Related
Feb 26, 2013
Photoshop Elements 8 crashes when trying to start Organizer. Funny, that starting the Photoshop Editor is not a problem and works fine.I reinstalled the software and then installed it again, but had no effect.
View 7 Replies
View Related
Oct 22, 2013
After installing the latest fix/update/patch Paintshop Ultimate X6 crashes continuously. After startup it goes for a minute or so and then crashes. I have uninstalled and reinstalled it without any change. I've emptied the temp directory.
View 4 Replies
View Related
Jun 30, 2011
As some know, it comes on the installation CD of PSPX3.
Quite simply, three seconds after double clicking the program icon, I get this. I'm on the second installation. Patches won't install. I get the message " product that needs to be updated not found" or something similar.
View 14 Replies
View Related
Feb 8, 2011
I installed a new harddrive on my laptop and restored a Ghost image of my old drive onto the new one. Most of the installed software worked right off. Some needed to be re-activated as the software detected a significant hardware change. However, PSP X3 would not start, crashing during loading. The PSP X. splash shows and the loading status gets to "initializing palettes" then Windows reports "Corel Paintshop Pro X3 has stopped working. Windows is checking for a solution...". That's it.
I have un-installed PSP X3 and reloaded from CD. I downloaded the 4 existing patches (1 through 4) and installed them in sequence. I didn't try starting PSP X3 until all the patches were in. Corel.com confirms the activation of the software.
I've used PaintShop since the JASC days and the software works great. However, since about version 9, the software has become more prone to crashing under a variety of circumstances. Now it won't start.
Specs
1.8 GHz laptop
3 GB RAM
500 GB Seagate Momentus XT drive with 4 GB RAM buffer (supposedly a "hybrid" drive)
Windows 7 Pro 64 bit
View 13 Replies
View Related
Mar 26, 2013
Every time I press the start button (the nice big R) Revit crashes like this: URL>...It takes about 30 seconds before I can go further.
View 2 Replies
View Related
Dec 29, 2011
I am having a problem with a new install of photoshop elements 10. It turns out this I now have this problem with elements 9 as well. I tried elements 9 in september and it worked great. I revieved elements 10 as a gift and tried to install it and got the following error. I went back and tried to re-run the trial of elements 9 and I am now getting the same error on 9.
Here is the error I get. After launching the editor, either from the welcome screen or directly from
C:Program Files (x86)AdobePhotoshop Elements 10PhotoshopElementsEditor.exe
I get the following pop up. As you can see the editor does start, but shortly after it starts I get the popup.
I am running on Windows 7 (Pro) 64bit. My video cards are an AMD Radeon HD 6770 and an integrated ATI Radeon HD 4200 with a driver version of 8.920.0, dated 11/9/2011
Here are the error messages from the event viewer
Launch of elements 10 editor:
Faulting application name: PhotoshopElementsEditor.exe, version: 10.0.0.0, time stamp: 0x4e70c16d
[code].....
As I mentioned above, the trial of elements 9 had been working fine. I have made several updates to my system. I can't be 100% certain of the timeline, but I think most were done during the time that I was testing elements 9 and did not break elements 9. i am fairly sure there were a number of updated that were made after my last clean run of elements 9 and before I installed elements 10, namely windows 7 sp1, and various updates, but I was able to install the trial version on a laptop with the same os and same updates.
View 6 Replies
View Related
Aug 1, 2011
I was having trouble with _copyclip/_pasteclip and I found a link at Autodesk with a hotfix, which I downloaded. It has these instructions:
"However, drawings that were previously saved in these formats from AutoCAD 2007 will continue to have the problem unless they are resaved with the hotfix applied"
How do I apply the hotfix?
View 8 Replies
View Related
Jul 30, 2012
CS 6 Photoshop stopped working on my MacBook Pro under Lion.After installing Mountain Lion over Lion it still crashes every time.All other CS 6 apps run fine.I have all latest updates from Adobe and AppleHere is an extract from the dump:
Process: Adobe Photoshop CS6 [1637]
Path: /Applications/Adobe Photoshop CS6/Adobe Photoshop CS6.app/Contents/MacOS/Adobe Photoshop CS6
Identifier: com.adobe.Photoshop
Version: 13.0.0 (20120315.r.428)
Code Type: X86-64 (Native)
[code]...
View 5 Replies
View Related
Jan 26, 2013
I cannot start printing through neither CTRL+P, nor the context menu nor the menu. Organizer always crashes. This was not the case with PSE 10 and using the same printer.
View 1 Replies
View Related
Mar 20, 2012
We just installed AutoCAD 2012 on a machine that was running 2006. (32 bit on Windows XP Pro).
We opened a file that was created in 2006 and the Text is missing from the file. I tried to create a new file and when I start typing text, nothing happens.
I installed the service pack update and hot fix and still doesn't work. I've tried re-booting and nothing happens. I tried to go in and migrate the tools from 2006 but it was already done.
note, that this has also been installed on another computer and everything worked fine.
View 8 Replies
View Related
Dec 4, 2012
We are instaling Windows 8 this evening and I am trying to export the settings from C3D/map 2011.1) Is it possible to export your setup, which would capture a screenshot, so thal your toolbars and menus that you have set can be imported into your 2011 re-install? 2) In Options the Profile "Export" is the setup for your File path defaults under "Options" "File"? 3) SYSDVLG will export all my default settings, which I can import into my initial "Drawing 1" after re-install?
View 4 Replies
View Related
Jan 16, 2012
I have tried unistalling framework 4 and reinstalling using the standalone installer. I have also used the framework clean up tool with no luck. I have tried to repair the installed framework 4 with no success. I have tried all of this with my antivirus turned off and I have tried to use Microsoft fixit along with running Ccleaner registry fix.643 Error.
View 3 Replies
View Related
Nov 4, 2011
When trying to install the latest Hotfix for Frame Generator, I receive an error message, "
Internal Error 2902. ixfAssemblyCopy". This hotifx will correct the length change display in the Bill of Material. It seems this error may be cause by "Windows Installer". I have Inventor 2010 SP1 installed and have had no problem in installing other patches and hotfixes. What makes this one different?
View 5 Replies
View Related
Dec 3, 2012
I need to load a hotfix for my autocad civil 3d how do you do the following
Before applying this update, make sure that any customizations made to the user profile (such as, customizations made to the support file search paths, print file customizations, printer support file paths, redirections, custom template settings, and so on) are exported to a secure location, then imported and reapplied after the update has been successfully installed.
View 1 Replies
View Related
Apr 21, 2012
I recently just installed Autocad 2012, using a student licence obtained from the autodesk website. I entered my serial number and product key, and it said that it was suceesfully installed. It even launched, however now when I launch Autocad 2012 the start up screen appears, it says its initialzing, it loads then nothing appears on my screen or even my taskbar, I'm running Windows 7 professional 32 bit.
View 9 Replies
View Related
Mar 13, 2012
Just last week I was working just fine. When trying to access the product today, as usual the A5 sized "Loading" starts but when the product is to appear it just shuts off. It is not indicating what the error is through a dialog box, hence, I am not sure what the problem may be.
I have check various discussion groups which say it may arise from FLEX related files or CascadeInfo.cas but nothing changed. I have also done an entire un installation of the product and Installed it from scratch. The problem persists.
PC Specs:
Intel Core i7-720QM processor
Windows 7 Home Premium N 64-bit
16GB DDR3
1280GB HDD
View 1 Replies
View Related
Mar 10, 2012
I have AutoCAD 2012 on a Win 7 64bit laptop. Ive had it on here for over a year and never had this issue till today. My AutoCAD loads up fine and loads up the default Drawing1 file. However after waiting a few seconds and going to click File, it comes up with Not Responding on the top. I wait patiently for several minutes and it does not recover. Not quite sure what went wrong . My desktop has the same issue. There is a possibility of it being caused by CCleaner after using it to fix errors and it messed with something in the resgistry while doing so but not sure.
View 9 Replies
View Related
Oct 29, 2013
I know that I can find which points are which by checking the properties, but I am wondering if there is a way to (for example) edit the grips so that they indicate which end is which, like how they are used in dynamic blocks to show how an object can stretch. This isn't a problem that requires an imeediate fix, but would be nice if there were such an option.
View 4 Replies
View Related
Jun 22, 2012
I created a linetype using text shape. Let’s say, that my line is only AAAAAA. Now when I apply this linetype in the drawing, the lines always have a small, line before and after the characters. Actually you see this: -AAAA- . How can I delete or hide the start and end lines.
View 2 Replies
View Related
Apr 20, 2012
Autocad 2010 won't start up on my new windows 7 64bit system. I keep getting error msg Error msg : 0XC0000076 when I try to lauch the program
View 1 Replies
View Related
