I was having trouble with _copyclip/_pasteclip and I found a link at Autodesk with a hotfix, which I downloaded. It has these instructions:
"However, drawings that were previously saved in these formats from AutoCAD 2007 will continue to have the problem unless they are resaved with the hotfix applied"
How do I apply the hotfix?
When trying to install the latest Hotfix for Frame Generator, I receive an error message, "
Internal Error 2902. ixfAssemblyCopy". This hotifx will correct the length change display in the Bill of Material. It seems this error may be cause by "Windows Installer". I have Inventor 2010 SP1 installed and have had no problem in installing other patches and hotfixes. What makes this one different?
I'm having a constant problem with Autocad 2010LT crashing on startup. After clicking on the AutocadLT 2010 icon the program starts to run, I see the start-up screen, and then everything disappears without any notice or error message.
I have installed service Updates 1 and 2 as well as the "Startup Error and Text Editing Hotfix". Nothing that I have read on the forums seems to fix the problem. I'm running Windows 7 Professional (64-bit). I should also mention that I have been running this version of the software on this computer without any issues for over 1 year before encoutering this problem.
I need to load a hotfix for my autocad civil 3d how do you do the following
Before applying this update, make sure that any customizations made to the user profile (such as, customizations made to the support file search paths, print file customizations, printer support file paths, redirections, custom template settings, and so on) are exported to a secure location, then imported and reapplied after the update has been successfully installed.
I am trying to install the hotfix for 3dsmax 2012 and I keep getting this error. Could it be because I still have 2011 installed?
View 1 Replies View RelatedI installed 4 or 5 Microsft hotfixes in a row the other day. Since, photoshop 7 doesn't start up. I went to the control panel to uninstall the last new hotfixes, but each time I get the dialog box telling me that if I uninstall the KB840315 then Internet Explorer and Outlook Express might not work. For the moment I can work on a different computer, but not for long.
I've uninstalled and reinstalled photoshop on different disks. Still the same.
I have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
I have Maya 2012 Creation Suite x64 on Windows7, and just installed Hotfix 2.
PhysX has now disappeared, no plugin reference or shelf.
I've tried loading physx.mll manually, but reports missing procedures.
Also tried setting MAYA_PLUGIN_PATH to the nVidia Maya plugin directory, no luck.
What am I missing, and what did Hotfix 2 do?
Just installed X6 on a computer everything was working well then I installed the latest hotfix now all I get is a blank error window (no text a red circle with an X on it and an OK button.
It never finishes loading. Has not since installing the hotfix.I tried repairing the install, dumping temp files, F8 on start and none of them made any difference.
Can you apply a jpg to the side of a 3-D box in AutoCAD? I think I remember doing this with Rhinoceros before, but unfortunately I don't have access to that program right now.
View 4 Replies View RelatedI have attached what I am doing - I was able to do it back in 10 but can't figure it out after 3 years.
I created a solid box, I have a flattend (unwrapped) jpg of a shipping container. I can't get it to wrapp around aligned. It looks like it put the material on all sides and it wrapps all 4 sides over each out so its all wacked up.
I created a solid box, I have a flattend (unwrapped) jpg of a shipping container. I can't get it to wrapp around aligned. It looks like it put the material on all sides and it wrapps all 4 sides over each out so its all wacked up.
View 3 Replies View RelatedWhe plotting drawing with a raster image in Autocad Map 3D, a dialog box pops up and reads "Failed to apply styles" and Failed to get band data". I have adjusted the RASTERPERCENT and the RASTERTHRESHOLD and the issue is still not resolved.
View 1 Replies View RelatedI 'm trying to make a can of coca-cola in autocad 2013 but i can't. The texture never fit right on the model. How can i apply the texture correctly to make the can.
View 9 Replies View RelatedI am trying to install the update #2 for Autocad LT 2010.
I ran the update from the autocad ballon and I got an error.
I got a message to restart the computer. I did and i had a message i had to manually install.
I downloaded the correct update file (autocadlt2010update2x64.exe) and when I run I have error 1328.
Says "error applying patch to file C:Config.MsiPTE1B3.tmp. It has probably been updated by other means, and can no longer be modified by this patch."
I wonder if its possible to apply a filter to a subset of entities (that could be the result of a previous filtering).
View 8 Replies View RelatedI'd like to have a fast method to apply "something" to view my drawings labels and points (by now) with different styles depending of my needs. I'd want to view my "station points " with a green circle near the station number, but In other "work scene" maybe I want to see nothing more a one pixel point, or I dont want to have my work space full of numbers....
I'd want to have a dropdown menu to customize how I'd want to view my cartography.The same I'd need to layouts. Is it possible to say this layout plots this symbol in this way and this another plots it using another style? ( and if possible to have a global way to do this with a whole set of styles)
Also... Is there any way to apply this when use a xref ? That is to say: is it possible to get my main drawing have control over its xrefs ? I'd want to have a way to view this xrefs in different ways...also a way to override layers properties from the main drawing.
I have an elevation which requires stone panels to be installed. The elevation was created in a single part using the multi-body method. Photographs were taken of the stone slab and modified, it was turned into a BMP with a low res. of about 75. (Tried to keep everything small). As I begin to apply the texture of the stone with the decal method (due to proper positioning and scale size) Inventor starts to run very slow and pauses (Not Responding). The more decals I apply the more it stop working. I don't understand why this process is utilizing 7 GB of ram.
My Spec's:
Operating System
MS Windows 7 64-bit SP1
CPU
Intel Core i5 760 @ 2.80GHz 41 °C
Lynnfield 45nm Technology
RAM
8.00 GB Dual-Channel DDR3 @ 661MHz (9-9-9-24)
Motherboard
Intel Corporation DH55TC (XU1) 43 °C
Graphics
SyncMaster (1920x1200@59Hz)
NVIDIA Quadro FX 580
LogMeIn Mirror Driver
Hard Drives
488GB Western Digital WDC WD5001AALS-00E3A0 ATA Device (SATA) 45 °C
i know how to apply a filter to my Layers dialogue box - i use this often to just show local layers when i have a .dwg with a few xrefs in it, each of which have heaps of layers within themselves, and i don't need to see the xref layers etc
How to do a similar thing to the Properties bar layer field?
until now, when i needed to change the layer of an entity, i click on the little arrow on the RHS of this drop down field in the properties bar, and then have to seek out my layer name, which could be amongst the hundreds of xref layer names, depending on the naming conventions used etc.
i know with perfect naming convensions or by putting a "0" in front of my local layers, then at least all of mine will be grouped together at the top, but is there a way to bypass that option to ONLY show local layers???
I have got as far as understanding the difference between CTB and STB plot styles, and have identified I require STB, as I want to apply plot styles to individual layers as opposed to certain colours.
I have converted my drawing from CTB to STB and have set up an STB plot style to acheive what I would like. However I am unable to apply the styles held within this STB to individual layers in the layers property manager. In the plot style coloumn they are slightly greyed out, upon clicking on a layer a 'Select Plot Style' box appears which lists the "normal", "style 1" & "style 2" that I have created. However upon choosing a different style and hitting ok it doesnt apply my selection.
I am reasonably confident my STB file is setup correctly, as it is possible to apply the styles to objects using the object properties box, and for these to then be printed correctly to the style assigned.
PS - I am using AutoCAD LT 2010
I have found where / how to apply a background mask to text (listed in the properties box when I highlight text). The list of fill colors does not include white. I was hoping to create a background mask that did not add a shaded box to a black and white print but simply blocked out the contents behind the text.
I am using 2010 LT if this makes a difference.
I have a polyline that I would like to have a thickness of 1. But I'd like the thickness to apply on one side of the line or the other. Not from the center, thus allowing 0.5 on either side of the center.
View 6 Replies View RelatedWe are trying to apply a chamfer / fillet, anywhere betwen 0.5mm - 1.00mm, to the attached ACAD 2004 / ACAD 2012, 3D model, along the edges connectiing from the existing chamfer / fillet, up each side to the top - where you will see there is no chamfer / fillet - (the outside of the cup profile,Attachment 34929 Attachment 34928not the inside of the cup profile).
That resolved the problem, the software struggled a bit with filleting till we tried a smaller degree, then it worked - we thought it would automatically fillet (flow) in / out according to what dims were available.
Is there a way to apply a Layer State to multiple DWGS, without going into each DWG?
View 3 Replies View Relatedhow to apply geoid / scale factor for transformations?
I need to get UTM zone 11 in WGS ellipsoid to ground coordinates.
When I create shapes in subassembly composer, I want to apply different colors to the shapes. How can I do that?
View 3 Replies View RelatedIs it possible applying textures on solid surfaces in AutoCAD 2012?
If yes, how do I apply textures on them?
If I draw a flat square, and then a flat circle next to it, can I do things using iLogic that will make the two seperate parts interact? such as say 'if the circle contacts the square, then make the square become a circle too' or something like that?
View 3 Replies View RelatedI have an iLogic rule that I want to add to several files that are already existing. Is there an "easy" way to do this other than opening each and every file, creating a new rule, pasting in the code and then saving the file? If I had a macro that would create the rule I could run it with KwikBatch.
Using R2010/11
i have a standard template(page layout) DWT file, that i need to apply into multiple drawings. is it possible to create a scipt for that cause i have 100 dwg that already has a template that i need to replace by the new one.
heres a script that doesn't work:
-INSERT
"TBLK1=V:BlocksTBKL2.dwg"
0,0,0
1
1
0
ZOOM
E
(entdel (entlast))
QSAVE
I have to applicate to 3000 drawings the same page setup. How can I do that rapidly? I have one master drawing with the good page setup.
View 9 Replies View Related