Whe plotting drawing with a raster image in Autocad Map 3D, a dialog box pops up and reads "Failed to apply styles" and Failed to get band data". I have adjusted the RASTERPERCENT and the RASTERTHRESHOLD and the issue is still not resolved.
View 1 Replies
I'd like to have a fast method to apply "something" to view my drawings labels and points (by now) with different styles depending of my needs. I'd want to view my "station points " with a green circle near the station number, but In other "work scene" maybe I want to see nothing more a one pixel point, or I dont want to have my work space full of numbers....
I'd want to have a dropdown menu to customize how I'd want to view my cartography.The same I'd need to layouts. Is it possible to say this layout plots this symbol in this way and this another plots it using another style? ( and if possible to have a global way to do this with a whole set of styles)
Also... Is there any way to apply this when use a xref ? That is to say: is it possible to get my main drawing have control over its xrefs ? I'd want to have a way to view this xrefs in different ways...also a way to override layers properties from the main drawing.
I have got as far as understanding the difference between CTB and STB plot styles, and have identified I require STB, as I want to apply plot styles to individual layers as opposed to certain colours.
I have converted my drawing from CTB to STB and have set up an STB plot style to acheive what I would like. However I am unable to apply the styles held within this STB to individual layers in the layers property manager. In the plot style coloumn they are slightly greyed out, upon clicking on a layer a 'Select Plot Style' box appears which lists the "normal", "style 1" & "style 2" that I have created. However upon choosing a different style and hitting ok it doesnt apply my selection.
I am reasonably confident my STB file is setup correctly, as it is possible to apply the styles to objects using the object properties box, and for these to then be printed correctly to the style assigned.
PS - I am using AutoCAD LT 2010
How to apply photoshop styles to an arabic text?
View 4 Replies View RelatedAs with any upgrade to Corel over the past decade, they change things on new versions and hide them! I've been using since v1.0 (which instantly became v1.1 upon release).
I JUST installed v X6 and off to my first problem within 10 minutes.
The old menu in X5 used to have a docker called "Graphic and Text" which is no longer available in X6. After some research, it looks like the "apply a style or style set to an object" is the way to go, HOWEVER if I right click on the text as suggested to find the "Object Styles" menu, the sub menu is a blank little rectangle that won't display the menu items.
How to copy a style to a menu and then apply it as well in X6?
I have done this before but not today! The preview button is checked but I can't see any drop shadow appear. I have duplicated the background and extended the canvas 110% as in the past.
View 1 Replies View RelatedI want to create an illustration with black outlines. Within these outlines I want to have some spots without outlines that stay clean within the lines. I have tried 3 options so far and have found a solution but it's far from ideal.
1. Create clipping masks for each element that has a spot on it and assign a stroke to the clipping path again after. However by creating the clipping path, the path styles dissapear. In this case I want to keep the pointed ends to the open path outlines (see top image).
2. Draw in the lines where the spots are and create a live paint object of the entire illustration. Then paint in the spots and other areas. However when I create this live paint object the lines again lose their applied styles and even 'end' at each intersection, creating nasty edges where the lines should go 'underneath' smoothly (see bottom image).
3. The option Im using now. Duplicate the path outlines and create clipping masks for the spots without strokes. Then put the stroked outline with the desired styles on top. The problem with this is that I have almost twice as much elements in my illustration now than I actually 'need'. And the styled outlines are not connected with the color underneath, so its very easy to accidentally move something around...
Any easier way to create this effect without all the hassle?
Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies View RelatedI have a hatch pattern in one of my objects. I want to apply exactly the same hatch pattern to other objects but I don't remember the settings for original hatch.
There is a command in ACAD to apply properties of one object to others (brush icon in toolbar). I tries to use this command but it seams that it doesn't work for hatch.
What is easiest way to apply a hatch pattern from an object to the other one?
How do you apply certain contour label styles to certain surface styles (i.e. When I have an existing surface i want the default contour labels to be an "existing contour" style). Right now the default is a "finished contour" label style for all surfaces.
View 4 Replies View RelatedHow do update the styles library to keep from getting the Styles Conflict error box. I have used the Standard.dwg file that loaded with Inventor 2012 but everytime I change styles and save the changes in a new template in reverts back to the library definitions.
I used to be able to select 'NO' in the LIbrary option of the Projects Folder but that optiion no longer exists.
We've created a new parts list style for a border.When the border tempalt file is on the c: drive...everything works hunky dory...parts list, revision tables, etc.But as soon as we copy and paste that border into the template library folder for new drgs...the parts list style is missing from the local styles?
So to make it appear on the new document...the style manager has to be set at all styles and the new parts list style has to be saved to the document?What aren't we doing to make it appear on the template?
Also note that because the drawing border template is in a template folder as part of the design projects...it is NOT editable...so it has to be edited outside the template folder.
Is it possible to change a drawing using named plot styles (.stb) to colourdependent plot styles (.ctb) within the drawing itself? The variable'pstylemode' comes up as read-only.
View 6 Replies View RelatedI have a few styles in my Presets/Styles folder but they don't show up when I try to load them from the Preset Manager --
View 2 Replies View RelatedI want to move AutoCad LT 2012 to a new PC.When starting the License Transfer Utility I can login but when clicking export I get.
The maximum number of exports for this serial number has been reached. You may not export more licenses than you have purchased.Click the "Try Again" link to resubmit the request.
I am having a problem to connection to data, the new file connection is properly connecting to data , if I going to add new data , I am getting this error as shown below.
Failed to cache features.
Failed to execute Fdo command.
ORA-03135: connection lost contact Process ID: 11779 Session ID: 4 Serial number: 6917
after installing Excel 2013 I can not open anything in Inventor."VBA failed to initialize... Please restart inventor".I uninstalled Excel.
I re-installed Inventor.
I reinstalled vba6.msi.
Still running in this error!
System: Win 8 - Inventor 2014 - Excel 2013
I am trying to copy some object from drawing but it's saying Copy to Clipboard failed!
View 3 Replies View RelatedHad the message "Failed to get CommCntrController"? I have suddenly started to have this pop up every time I open a drawing. The only change I have made lately is downloading Inventor Fusion
To which a couple of you replied, I changed the relevant values in the registry and everything worked. Now however it has popped back up again (I have no idea why) and doesn't seem to want to go away. The registry path suggested is not quite the same on my machine, perhaps because it's networked, I really don't know but I am able to find what I think is the right reg and change the value.
I have some dwg files, shp files, images, and sdf files in my C: . I am using AutoCAD Map 3D 2011. When I try to open one of the dwg files it is showing a warnng message "Failed to open FDO connection".
View 2 Replies View RelatedI am trying to copy some items in cad but I keep getting the error ' copy to clipboard failed'.
View 9 Replies View RelatedWhenever I select some objects in an AUTOCAD drawing and Press Ctrl+C to copy them for taking it to any other file, it gives error "COPY TO CLIPBOARD FAILED."
However, this error is not for all the files but in some of the files. After much tweaking and researching on my own, I found out that this happens in files in which I have set viewports in LAYOUT. When i delete the entire LAYOUT by right Click + Delete, and then go to MODEL and do Ctrl+C, the copy to clipboard happens in normal way.
Why do I get the error when I have set viewports in LAYOUT ?
I can publish my assembly to a dwf using the express option, but can't using the the custom or complete options.
I have gone into the sub assemblies and tried to publish from them - 2 of them work 2 of them give the same error message.
I then went into their sub assemblies and was able to publish them (so that's 2 levels down now).
I have used rebuild all - working my way back to the top level assembly.
I have some sheet metal components in the various assemblies.
The following code produces a run time error:
"Failed to get the Document object"
Public AcadApp As AcadApplication, AcadDoc As AcadDocument
Set AcadDoc = AcadApp.ActiveDocument
AcadApp.ActiveDocument = AcadDoc
why?
A co-worker and I came in this morning and both of our inventors are giving us this Faild to Open error. We run on single user accounts and we do not use vault. I then tried to backup all of my documents, but it would not let me backup either. I did a properties on the folder and it showed everything was read only. I click off read only and it let me backup. But still will not let me open a model part or assembly??? I tried turning off Avast and that did nothing either.We are still running 2008. Inventor and Autocad.
View 3 Replies View RelatedI recently got the blue screen and I had to reinstall the OS (Windows 8). I had AutoCad Map 3D and AutoCad Civil 3D installed before the blue screen. I am trying to reinstall them and I keep getting multiple errors saying I am missing files.
C:AutodeskWIAutoCAD Map 3D 2013x64acadmapProgram FilesRootMaterialLibraryParser.dll
C:AutodeskWIAutoCAD Map 3D 2013x64acadmapProgram FilesRootslidelib.exe
C:AutodeskWIAutoCAD Map 3D 2013x64acadmapProgram FilesRootanav.dll
etc...
I have problem to run AutoCAD(not start).
I have problem to uninstall (Failed to get allied products).
I have the student version of Inventor 2014 installed on my computer. My O/S is Windows 7 Ultimate 64 bit. I have installed and reinstalled Microsoft Visual Basics three times. But, I am still getting the error "VBA failed to initialize properly".The program was working fine for about a week with no errors reported. Now, every time I try to start a tutorial I get this error.
View 5 Replies View RelatedI'm working in one of my colleagues drawings and whenever the drawing is regenerated (for instance when panning or orbiting) I get the message "Failed to open record!".
View 4 Replies View RelatedHow to get this plugin to work with 2013? I keep getting the dialog saying: Failed to create CoilFeature... Try with a bigger Pitch Offset value.
View 5 Replies View Relatedmy drawing file has failed to open. when i try to open i geta feedback of drawing file invalid.i need this drawing before saturday 9th 2011.
View 4 Replies View Related
