after installing Excel 2013 I can not open anything in Inventor."VBA failed to initialize... Please restart inventor".I uninstalled Excel.
I re-installed Inventor.
I reinstalled vba6.msi.
Still running in this error!
System: Win 8 - Inventor 2014 - Excel 2013
I have the student version of Inventor 2014 installed on my computer. My O/S is Windows 7 Ultimate 64 bit. I have installed and reinstalled Microsoft Visual Basics three times. But, I am still getting the error "VBA failed to initialize properly".The program was working fine for about a week with no errors reported. Now, every time I try to start a tutorial I get this error.
View 5 Replies View Relatedi get this really weird bug when i try to install photoshop cs6
PDapp here [URL]
I tried to remove an old version with Revo uninstaller, and when trying to install that one after, it just did that
Theres the error, in Danish though, but it says:"An error occurred the installationsprogram could not be initialized, Download Adobe support advisor to register the problem"
The problem is, i have downloaded it, but it does not fix it..
I had to get a new hard drive on my Mac and I backed everything up and reinstalled it all when I got it back. Photoshop is the only thing not working now. I try to open it and get this message:
Could not initizlize Photoshop failed to initialize cooltype. I've read and read and tried everything is could on this[URL]... and I also uninstalled and reinstalled it twice and still I get this message.
i download photoshop but then when i was installing the program, the installer failed to initialize. I downloud Adobe support advisor but it did not find any problem.
View 1 Replies View RelatedCould not initialize Photoshop failed to initialize CoolType..... photoshop cs6, upon launch.. crashes with this error..
View 3 Replies View Relatedit openes a dialog box that read: this application has failed to initialize properly ( 0xc000001d). click ok to terminate program
View 5 Replies View Relatedwhen i run 3dsmax 2012 it tell me "the application failed to initialize properly (0xc0000005)"
View 2 Replies View RelatedI cannot open Illustrator CS6. I get this error. How do I proceed?
View 3 Replies View RelatedAfter not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message:
failed to initialize the video capture plugin
Open driver failed
(15200:43:0)
(15023:4:2)
cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
in capture mode, choosing "capture video"I get error message "failed to initialize the video capture plug-in another program may be using it or this file has been moved" " open driver failed" 152.00.43.0 15023.4.2 my video capture device is a USB WDM 2860 and shows in the "source" window but no "formate" can be chosen and no video comes through. The operating system is windows 7 64 bit. I have "Magix movie edit pro 17" and "Cyberlink Video Director" and both of these programs work with the same device and capture. Neather one of these applications are running while using Video Studio. I checked and nothing else is utilizing this USB WDM 2860 device. I reinstalled the software, installed the patches, and uninstalled the USB drivers and reinstalled them.
View 7 Replies View RelatedI made it through a project with a few Smoke crashes, mostly on a particular clip. Then when I go back to make revisions a day later I get this message:
Error: VOLUMEMGT: Failed to initialize Stone+Wire connection.
Everything was working fine up to that point besides the few Smoke crashes that recovered with no problem.I am really in a bind now and need to finish this project urgently.sw_logs_2.txt
I just recently started having problems with my PSP Photo XI program on my laptop. The other day it would start up and run normally, but the next day when I went to run the program, it wouldn't start. My computer would freeze up and show this error message: "The application failed to initialize properly (0xc0000006). Click OK to terminate the applicaion."
I tried turning off my computer and running the program again, but the same thing came up. I tried to run the repair program on it, nothing. I even tried to uninstall PSP XI to no avail as I got a different error message: "Internal Error 2328 C:Program FilesCorelCorel Paint Shop Pro XICoreErrorCodesRC.dll"
I really don't know what to do, short of just completely resetting my laptop back to factory settings and starting fresh. But even then I don't know if that would fix the problem.
I wish I knew why the program decided to just stop working one day, as I haven't downloaded anything and my anti-virus is up to date.My computer is a Dell XPS M1710, and it runs Windows XP SP3.
I get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
I read studios2010 problem and it sounds like I have something similar.
I get to the startup screen and get "Failed to Initialize Stone & Wire. Press Escape."
I have a student license and I might have a corrupted .db file. Just don't know where .db files are on my computer.
But when I start Photoshop, it displays its first couple screens full of stuff (before there's any user input), and then displays a dialogue box saying, 'Could not initialize Photoshop failed to initialize CoolType'. When you click OK, Photoshop terminates.
It may or may not be relevant, but Illustrator also won't start, though it doesn't even give me the courtesy of an error message. It just displays that little box with the graphics and the list of developers, for 30 seconds or so, and then it disappears without a trace.
I can publish my assembly to a dwf using the express option, but can't using the the custom or complete options.
I have gone into the sub assemblies and tried to publish from them - 2 of them work 2 of them give the same error message.
I then went into their sub assemblies and was able to publish them (so that's 2 levels down now).
I have used rebuild all - working my way back to the top level assembly.
I have some sheet metal components in the various assemblies.
A co-worker and I came in this morning and both of our inventors are giving us this Faild to Open error. We run on single user accounts and we do not use vault. I then tried to backup all of my documents, but it would not let me backup either. I did a properties on the folder and it showed everything was read only. I click off read only and it let me backup. But still will not let me open a model part or assembly??? I tried turning off Avast and that did nothing either.We are still running 2008. Inventor and Autocad.
View 3 Replies View RelatedHow to get this plugin to work with 2013? I keep getting the dialog saying: Failed to create CoilFeature... Try with a bigger Pitch Offset value.
View 5 Replies View RelatedI created a macro for generate a PDF drawing, but when one file has been already created, AND he's already open, the macro don't work.
How to stop the macro automatically and notify that the macro has been stopped because the file is open.
Below, the current macro :
Sub PublishPDF()'Get the PDF translator Add-In.Dim PDFAddin As TranslatorAddInSet PDFAddin = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")'Set a reference to the active document (the document to be published).Dim oDocument As DocumentSet oDocument = ThisApplication.ActiveDocumentDim oContext As TranslationContextSet oContext = ThisApplication.TransientObjects.CreateTranslationContextoContext.Type = kFileBrowseIOMechanism
[Code] ....
But during the first analysis, it stopped and gave me a message saying: Improper constraints, material or mesh..Then I went on the internet for finding a solution, I came up with 1 solution - to set Average Element Size to 0.040 instead of 0.100.
After I tried this it came up with yet another "error": Mesh failed: Very large number of elements generated, mesher cannot proceed further!
I've read that the Error 1603 is just a windows error saying that installation failed. I'm trying to figure out why I cant get the content Center to install. I already have Autodesk Inventor 2011 installed on my machine and for whatever reason I accidently unchecked the install content center (this was some time ago). When I go back into the install and try to run it it doesn't work. now I dont have the DVD's but I copied the DVD files to my Computer onto a back-up hard drive. The DVD's have been since packed away. is the content center failing cause I'm running the setup from the Disk1zip and the content center Files are on Disk7zip or is something else interfering with my install?
View 1 Replies View RelatedError message 'Resize Work plane Failed'
it makes a copy of the Work Plane
that is not realy there and wont go away.
I keep getting; "A cross part association has failed".
*I got a sheet metal part fixed by jletcher, got it in to the assembly (1), updated the associations and that worked fine.
*I then opened the assembly (2) that contains the assembly (1) and fixed the "cross part associations" this file seems to work after save and reopen.
So, when I open the MAIN assembly it complains about the same stuff. I have fixed it But as soon as i close the files for the day it complains about it again the next day. This seems to go on and on
I have created some some parts in the assembly (2) and projected a few edges to be able to create these parts.
Inventor 2012 Pro 64-Bit
Win 7 Pro
RAM 16 GB
I have been having problems getting Task Scheduler to work. Its failing to connect to the database?
Its teløling me that path is not valid. How to I change path to be valid?
I'm having trouble with iParts. This specific part is for a component that has many dimensions that vary from size to size, for a total of 23 configurations, 9 inch, and 14 metric. I did not have this problem until today... when trying to work with the iAssembly that uses two iParts (by means of selecting which Part Factory Member is used in each Assembly Factory Member).
I know that if the files are read-only, the files will fail to generate. I have checked this, was still having trouble, and so I deleted the files. The problem persists.
All the members compute successfully and there are no empty cells when editing the table. The filenames are just letters/numbers and dashes, no spaces.
The assemblies and parts had been generated and checked into vault, but only now problems exist, only for the newer parts, which happen to be the metric parts.
when I try to use the VIEWBASE command to create views from my 3D solids, I always get the message "inventor server failed to load" and the command stops. I am using AutoCAD 2014 with SP1 installed on windows 8 .
In a similar message in the 2010/2011/2012 discussion group: URL....
it is suggested to reinstall the software, but this is not working for me.I have already tried to 'repair', 'reinstall' and completely remove all the software and then reinstalling it, but nothing seems to fix this problem.
Are there any other programs I need to have installed to get this command to work?
I am using Cable and Harness (Autodesk Inventor 2012 64 bit on Win7 64bit) and when trying to create the segment I only get the error message "The sweep operation failed for the harness segment Segment1 Adjust the segment geometry and try again". It does not matter what data for diameter and bend radius I am using under "Harness properties", it never works. When checking the "Bend radius" for violation it says nothing. I am attaching the files.
View 2 Replies View RelatedGet a message "Failed to export desel table" when i try to create an iPart, i have excel installed.
View 4 Replies View RelatedSimulation Frame analysis crashed when choose button Simulate. Write failed to connect solver.
View 9 Replies View RelatedI have an Inventor assembly that I am trying to open in Showcase to produce a nice render of.
I get this error, how can I determine what is wrong or how to fix? My assembly doesnt show any errors?
Inventor Professional 2014-Update 2 - AutoCAD Electrical 2014
Win7-x64 | ASUS P8Z77-V | i7 3770 -3.4 GHz | 32GB RAM |
240GB SSD | nVidia GTX 670 4GB - 320.49