AutoCAD Inventor :: Failed To Open Error
Jul 23, 2013
A co-worker and I came in this morning and both of our inventors are giving us this Faild to Open error. We run on single user accounts and we do not use vault. I then tried to backup all of my documents, but it would not let me backup either. I did a properties on the folder and it showed everything was read only. I click off read only and it let me backup. But still will not let me open a model part or assembly??? I tried turning off Avast and that did nothing either.We are still running 2008. Inventor and Autocad.
View 3 Replies
ADVERTISEMENT
Jun 12, 2013
When attempting to attach WMS data, Map Task Pane>Display Manager Tab>Data>Data Connect dialog>Data Connections by provider.
After entering the server name or URL and choosing "connect" I get the following errors:
"Failed to open FDO connection"
"The HTTP request URI was not found by the server"
It seems to work just fine for other users using the same steps.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Apr 14, 2011
After a system crash, I was unable to open any of the autoback files. I get a "File Open Failed" error.
View 5 Replies
View Related
Jun 29, 2011
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
View 1 Replies
View Related
Feb 2, 2012
I want to use the command viewbase to link an inventor ipt to acad.
But when i give the command i get the message "Inventor server failed to load".
I have installed vba and still get the message.
How can i load the inventor server?
Your drawings are only as good as the symbols that complete them...
View 5 Replies
View Related
Sep 17, 2013
I created a macro for generate a PDF drawing, but when one file has been already created, AND he's already open, the macro don't work.
How to stop the macro automatically and notify that the macro has been stopped because the file is open.
Below, the current macro :
Sub PublishPDF()'Get the PDF translator Add-In.Dim PDFAddin As TranslatorAddInSet PDFAddin = ThisApplication.ApplicationAddIns.ItemById("{0AC6FD96-2F4D-42CE-8BE0-8AEA580399E4}")'Set a reference to the active document (the document to be published).Dim oDocument As DocumentSet oDocument = ThisApplication.ActiveDocumentDim oContext As TranslationContextSet oContext = ThisApplication.TransientObjects.CreateTranslationContextoContext.Type = kFileBrowseIOMechanism
[Code] ....
View 3 Replies
View Related
Aug 28, 2009
what this error message means. I cant find any reference to it in the help files.
View 9 Replies
View Related
Apr 30, 2013
Had the message "Failed to get CommCntrController"? I have suddenly started to have this pop up every time I open a drawing. The only change I have made lately is downloading Inventor Fusion
To which a couple of you replied, I changed the relevant values in the registry and everything worked. Now however it has popped back up again (I have no idea why) and doesn't seem to want to go away. The registry path suggested is not quite the same on my machine, perhaps because it's networked, I really don't know but I am able to find what I think is the right reg and change the value.
View 6 Replies
View Related
Jun 26, 2001
The following code produces a run time error:
"Failed to get the Document object"
Public AcadApp As AcadApplication, AcadDoc As AcadDocument
Set AcadDoc = AcadApp.ActiveDocument
AcadApp.ActiveDocument = AcadDoc
why?
View 9 Replies
View Related
Aug 3, 2011
I have some dwg files, shp files, images, and sdf files in my C: . I am using AutoCAD Map 3D 2011. When I try to open one of the dwg files it is showing a warnng message "Failed to open FDO connection".
View 2 Replies
View Related
Dec 27, 2012
I'm working in one of my colleagues drawings and whenever the drawing is regenerated (for instance when panning or orbiting) I get the message "Failed to open record!".
View 4 Replies
View Related
Jul 7, 2011
my drawing file has failed to open. when i try to open i geta feedback of drawing file invalid.i need this drawing before saturday 9th 2011.
View 4 Replies
View Related
May 9, 2011
Normally When I start interface and tagging items (drawings) and writting in to Database, everything is working fine. However my interface is idle for morethan 15 mins, after that if I start the process (Searching items, Creating Items, Writting Items into DB) then immediately I got the Error "Automation Error System call failed". I did lot of R & D on my code, but I am unable to find the issue, may be Objects are emptied or i don't know.
Problamatic Code is given below.
dim strAutoCadVersion as string
strAutoCadVersion = Left(AcadApplication.Version, 2) is giving Automation Error when the interface has been idle for 10 mins.
Also I attached screen shots of an error.
View 1 Replies
View Related
Aug 9, 2012
I am facing problem for installing AutoCad 2011.I am getting this type of error
installation failed
autocad 2011
failed - fatal error during installation
View 1 Replies
View Related
Aug 8, 2012
When I open a file in Inventor 2013 I get the error message "cannot open XML file" for 20 or more files.(See attachment) This has only been an issue since 2013 was installed. What do I need to do to correct this?
View 2 Replies
View Related
Jul 9, 2013
When I run my corridor I get an error message that says "Failed Target Not Found" it is for the subassembly provided by WisDOT called UrbMedian.
View 4 Replies
View Related
Dec 16, 2013
I am attempting to split a face so I have a good area to apply a load in simulation and 3/4 of the areas split just fine but I CANNOT get the 4th area to split! This is all just projected geometry but left and right are symmetrical so I can't figure out why the L side works but not the R side.
View 2 Replies
View Related
Aug 23, 2011
We have stored lisp in fileserver which 30 users can access it. Now a day some users have getting the ‘failed to open project’ error after load the Lisp due to this they r also not getting most of the commands. The full rights have been given to appropriate folder which contains (Autolisp application source file, .vlx, Autocad VBA source). It has working for limited users (8-10 users).
Server OS: Windows server 2008
Note: Previously we had used windows server 2003.
View 1 Replies
View Related
Sep 9, 2013
Why do I keep on getting this error every time I try to do an update:
Adobe CSXS InfrastructureCS6
Installation failed. Error Code: U44M1P7
Adobe Photoshop 14.1
Installation failed. Error Code: U44M1P7
View 4 Replies
View Related
Oct 22, 2005
I keep on getting this message when I'm copying and pasting it says "Clipboard failed because it is too big to export"
I am using Adobe CS2 on a Mac G4 running 10.4 Tiger with 2 Gigs of ram.
View 7 Replies
View Related
Dec 6, 2006
when I load PS7 I get an error message "ExtendScript.dll failed to load", but when I click OK the program loads normally anyway. I realise that un/reinstalling may solve whatever the problem is but that means going through a whole rigmarole of reinstalling plugins, brushes, gradients etc
View 3 Replies
View Related
Feb 16, 2014
I have at least 3 photos that seem to be forever stuck in edit mode as a result of the problem. It has happened with versions 10, 11 and 12 now.
View 1 Replies
View Related
Jun 28, 2008
I have Adobe Photoshop(cs3 suite). Now, i have opened this on my laptop before(Dell latitude D600). All i did was load avast anti-virus and spybot. Now when i click on photo shop it say,
"Executable 'C:/program files/adobe/adobe photoshop CS3/photoshop.exe' had the following unrecoverable error:failed to load C:/program files/adobe/adobe photoshop CS3/photoshop.exe"
Anyone have an idea on how to fix this problem?
View 1 Replies
View Related
Oct 2, 2013
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies
View Related
Jun 22, 2009
I had to rebot my computer the other day then had put back CS3 on to my computer.When CS3 starts to install its self it comes up with:-
"Currently putting in shared components"then it comes up with:-"Succesfully installed 1 Component: Shared Compents"
Then it say's"Error: 2 Component(s) Adobe Photoshop CS3 Component Install Failed Shared Compents Component Install Failed.
View 4 Replies
View Related
Feb 8, 2012
when i run 3dsmax 2012 it tell me "the application failed to initialize properly (0xc0000005)"
View 2 Replies
View Related
Dec 27, 2012
I wanted to install plugin "Layer-via-Copy-Cut", when I tried to extract to Gimps plugin folder I received an error that I needed "libgimpui-2.0-0.dll". I have only been using Gimp for several days and I installed the 2.8.2 version
View 3 Replies
View Related
Oct 8, 2012
Photoshop Elements 9 organizer...when I try to "save as" a .jpg file from editor to the organizer, I keep getting an error "Import Failed" file not supported or file already in organizer...been using this software for a long time..just started to happen...now it says this everytime I try to save anything..it will not let me put it in the organizer at all. What happened?
View 1 Replies
View Related
Mar 7, 2012
I've never had problems doing this with Lightroom 3, just upgraded to Lightroom 4 and I can't seem to export anything. I also can't publish either.
View 9 Replies
View Related
Jul 10, 2013
I have isolated two issues in AE CC where I can duplicate a failed render with this message:
After Effects error: Rendering error while writing file "xxx". An output module failed. The file may be damaged or corrupted. (-1610153464)
This happens when opening an AE CS6 project and trying to render a simple comp with only one text layer and a moving mask. It also just happened after my first round trip test with Cinema 4D. I could RAM preview the c4d layer but the output to Quicktime h.264 failed.
I have even tried a full reinstall of AE CC. I have the basic FxFactory Pro plugins and MagicBullet Looks installed, but neither are being used since this is a single 1280x720 comp with a single C4D layer. Plus like I said it failed with the same error in past CS6 files.
I don't know how to force disable a plugin to test that, but I can't see how an unused plugin could cause a render to fail like this.
I'm on a new (late 2012) 27" iMac
3.4 GHz Intel Core i7
8GB RAM
NVIDIA GeForce GTX 680MX with 2GB VRAM
OS X 10.8.4
AE CC 12.0.0.404
CUDA driver 5.0.59
View 8 Replies
View Related
May 7, 2012
When I try to open a raw (NEF) image from my Nokon D800, I get an error box titled "Photoshop cannot open this file". I looked for updates after installing CS6 but none were found. What's the deal? I read that the D800 was supported in the CS6 release.
View 2 Replies
View Related
