VideoStudio :: Upload To YouTube Failed Due To Connection Error
Oct 2, 2013
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies
ADVERTISEMENT
Dec 23, 2010
Right at the end of it being uploaded I get this message
<?xml version= ‘1.0’
Encoding=’UTF-8’?><errors><error><domain>yt:validation</domain><code>too_long</code><location
Type=’xpath’>media:group/media:keywords/text()</location></error>
</errors>
The video is only 3:45, so it doesn't exceed 10 minutes, I uploaded videos successfully when I had the trial version and whenever I try to upload it to youtube on the purchased version, it gives me the error above, and does not put the video on youtube, what is the problem?
View 7 Replies
View Related
Mar 26, 2012
I'm now running X5, I must say it is much faster. However, when I try to upload to youtube there is a 15 minute limit and the only option I have is to let it clip the video to 15 minutes or cancel (i.e. I can't render the video and then cancel the upload and do it manually because it CLIPPED the output to 15 minutes)
So, I try to create a template to use for Create Video File so it will match my other uploads. I can't set the frame width and height. Without a template the Create Video File, mp4 etc... the default is 1920x... In the Make Movie Template the highest I can set it is 720x... the custom size is greyed out. I don't understand (and maybe I don't know) why I can't set the video parameters to anything I want them to be. Why is 720x the highest available...
In X5... Is there a way to turn off the 15 minute limit? Is there a way to HACK and turn off the limit? Is there a way to create the videos and set the settings where I want them so they match my previous uploads?
Note, the "cancel the upload after file created" trick no longer works. If you think I can create a template, why I can't set the parameters.
View 5 Replies
View Related
Sep 15, 2011
My YouTube-account is upgradet for files ut to 20gb, and naturally longer than 15min. But my Corel VideoStudio PRO x4 does not want me to automaticly upload longer files than 15 minutes.
View 4 Replies
View Related
Nov 21, 2010
I am getting an application error when I try to upload to Youtube. It fails at the end of the upload process. I cant copy the error, see attachment for message.
Windows 7 x64
Asus Mb-P7P55D-E
4gb ram
1TB hd
Nvidia 9600
View 2 Replies
View Related
Aug 3, 2011
How to override the 15 min limit while export to youtube ? My account does not have 15 min limit so why the corel application forces me that limit
and
i cannot find other settings to make so good video "1280 * 720" 25 frames etc that are used when clicking youtube button.
Want semi-HD (not full-hd) but it would nice to be able to adjust the bit rate so that the size is under 2gb
View 4 Replies
View Related
Apr 19, 2011
I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies
View Related
Jan 2, 2012
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies
View Related
Jun 12, 2013
When attempting to attach WMS data, Map Task Pane>Display Manager Tab>Data>Data Connect dialog>Data Connections by provider.
After entering the server name or URL and choosing "connect" I get the following errors:
"Failed to open FDO connection"
"The HTTP request URI was not found by the server"
It seems to work just fine for other users using the same steps.
C3D 2012 SP3 & C3D 2014 SP1
Win 7 Professional 64 Bit
View 9 Replies
View Related
Feb 7, 2012
I'm trying to upload a video into YouTube straight from my Video Studio ProX3. Was able to do it successfully with a video just 2 days ago but for some reason, doing a different video (same videocam & format) it's giving me this error message "The entity name must immediately follow the ',&' in the entity reference". And it won't upload or let me proceed. I have no clue what this means, i tried redoing it and changing the video file name and no luck.
View 1 Replies
View Related
May 2, 2013
How can a upload animation from Photoshop on youtube, as a youtube video ?
View 1 Replies
View Related
Feb 24, 2014
I shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen.
View 13 Replies
View Related
Feb 25, 2014
Is there any way to uploading Edge Animation animations on Vimeo or Youtube? (using v. 1.5)
View 1 Replies
View Related
Mar 21, 2014
i do not know much about color spaces. But I do know that different forms of media require using different colors (RGB, CMYK, all that stuff).
wrong color space or exporting formats.
What do I need to do to get the final video that I exported to look exactly the same (in terms of color) when it's uploaded on YouTube? Strictly just the color, because I understand quality goes down when uploaded to YouTube.
View 1 Replies
View Related
Jun 29, 2011
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
View 1 Replies
View Related
May 1, 2012
After not having much luck with the last video card, I changed my video card to a device with the Philips 713x chipset
Now when I select video capture I get the following message:
failed to initialize the video capture plugin
Open driver failed
(15200:43:0)
(15023:4:2)
cannot create the video capture filter
I have just installed card (SAA7130 TV PCI card) with latest drivers excluding the software so Video Studio 12 pro is the only capture software on the machine . I also re-installed both card and Video Studio after doing a complete system restore and used CC cleaner to remove any residual data before re-installing.
I need to use video capture within the Video Studio software as I need to use the scene detection functionality.The reason I had to change the card in the first place is that video studio only allowed me to capture in AVI 320x240 and gave 'capture failed' errors with anything else.
View 1 Replies
View Related
Sep 11, 2011
I recorded a few short children's programmes from the TV on a PVR and transferred them onto a DVD. The DVD plays perfectly on my computer. I had hoped to edit the programmes a bit (cut out adverts etc) but when I try to import the DVD into VS I get the message "Failed to read DVD information. Report ID: 0x80040901 (2305)". Presumably this code has a very specific cause. I am using VS11 on a Vista computer.
View 7 Replies
View Related
Aug 3, 2011
I have some dwg files, shp files, images, and sdf files in my C: . I am using AutoCAD Map 3D 2011. When I try to open one of the dwg files it is showing a warnng message "Failed to open FDO connection".
View 2 Replies
View Related
Jan 9, 2012
I am new at doing a ODBC connection and when I try to connect a database through our central system, this is the error message I got.Failed to cache features.
Failed to execute Fdo command. (2 consecutive occurrences)Table does not exist for class 'dbo:View_DH_UTM_COORDS (2)' (2 consecutive occurrences)
View 2 Replies
View Related
Sep 5, 2012
I made it through a project with a few Smoke crashes, mostly on a particular clip. Then when I go back to make revisions a day later I get this message:
Error: VOLUMEMGT: Failed to initialize Stone+Wire connection.
Everything was working fine up to that point besides the few Smoke crashes that recovered with no problem.I am really in a bind now and need to finish this project urgently.sw_logs_2.txt
View 1 Replies
View Related
Feb 27, 2013
I get error error "Failed to Initialize Stone + Wire connection when I start Smoke 2013. It working fine for 3 weeks.I uninstalled, reinstall, and still cannot get it to work.
Do I need to get a new download? Someone said it may be due to my internet connection.
View 1 Replies
View Related
Apr 8, 2013
After upgrading to LR 4.4 the publish service to Facebook semms to not work anymore.
I'm publishing from the new LR 4.4 to Facebook. I create a new Collection in LR 4.4, enters a Album name and presses the Create button. I see that the Album is created Ok on my Facebook account Then I add some pictures, and executes 'Publish now' After a minute, I gets the message the the 'Upload failed and no returning string was received from Facebook'.
View 2 Replies
View Related
Jul 4, 2012
I been trying to Upload a video to YouTube and it keep messing with the sound every time or the video would be all choppy. Is it Corel VideoStudio Pro X5 or YouTube messing with the video. I am using the up-loader that is installed in the program . it used to work but now it mess up a lot of times.
View 1 Replies
View Related
Jul 25, 2011
I have a clip and want to load to youtube. VideoStudio starts and setp 1 is login to youtube. Tells me The login requested a user name or password not recognized. I have manually just logged on to Youtube with the same username and password. No problems.
View 2 Replies
View Related
Oct 1, 2013
I'm using Corel videostudio Ultimate X6 and regularly record live bands, upload them to youtube after I convert them to a MP4 format using videostudio. A few months ago one of the venues installed a set of quick flashing lights, now my videos look blocky and you can't even make out their faces.
View 8 Replies
View Related
Feb 8, 2013
I am using Video Studio X4. if I can capture You Tube videos for future viewing off line. I am a fairly new user and really need some detailed instructions if it can be done. There are some really informative tutorials regarding my husband's GPS unit and other gadgets but we don't always have access to an internet connection.
View 6 Replies
View Related
Jan 14, 2012
How do I upload existing movies from DVD or youtube into the program for editing. When I follow the instructions it says "No valid content." Is it protected?
View 2 Replies
View Related
Jan 5, 2013
I can only upload 15 minute videos on Video studio x5. I cant find anywhere on the internet on how to change my login settings so I can upload past the 15 mark. I am verified from youtube to upload longer videos. Im getting sick of waisting my time saving it as a WMV and then going to youtube to upload it that way. My upload speed is slow enough already
So, How do you change youtube settings on Corel Videostudio Pro x5?
Picture wise,How can I not get this error when uploading to youtube?
View 5 Replies
View Related
Jan 21, 2011
I just finished building my first "serious" (i.e., with lots of clips, titles, sound track, etc.) video for YouTube. It runs about 7 minutes.
I used Video Studio 8 to develop the project. I tried rendering it in the .avi format with no compression, and ended up with something that runs slowly and has the audio badly out of synch. The file size, of course, is huge.
What format and settings are recommended for a project that is going to be put on YouTube? (I would like to use 640 x 480 if possible. That's the size used to build the project).
View 2 Replies
View Related
Apr 27, 2013
I am trying to create a video clip from FRAPS movies for uploading on YouTube. There seems to be absolutely no way to encode the video in HD. Either the encoding is extremely slow ans hangs at 4% without any further progress, I end up with a 2.5Gb file or I have to give up on HD and encode in 480p. Each and every format I try blocks the resolution at 720p or makes all options grayed out, not allowing, e.g., to change resolution, compression settings, etc. All MPEG profiles lead to 480p. All HDV profiles are super slow and/or result in 2.5Gb files. The QuickTime profile I tried would not compress the audio at all.
So it seems I have to produce a huge file with VideoStudio and process it with another encoder, which is just a painful nonsense that will degrade the quality of my output! I also tried the YouTube output, seemed to work, but trimmed down my video to 15 minutes. BUT WHY??? YouTube CAN accept videos longer than 15 minutes! Moreover, after all these futile attempts, the program crashes or hangs on me! I just don't know what to do next.
View 9 Replies
View Related
Aug 20, 2013
I just purchased x6. Here's what I'm trying to do...
I am a composer and I want to create "score perusal" videos of my music which I will upload to YouTube and embed on my website. I compose using a software notation program called Finale. There are two "views" in Finale:
1. Page view: the score looks just like an actual score with pages numbers, the notes, words, etc. showing one page at a time
2. Scroll view where the score is laid out horizontally.
In either view, I can "play" the score while a green line follows the music, turning pages (in page view) or scrolling horizontally (in scroll view). I can also "print" the pages as PDFs (but not as images).
Here's what I've tried in VSx6:
1. Using Screen Capture, I recorded the score as it scrolled across the screen. I put that Screen Capture in the video track and then imported the audio into the music track and synced it up. In VSx6 when I played it back using "project," the score looks bad (fuzzy). If I play back only the scrolling score (iow, no audio) it looks good (not razor sharp but legible), however, it can't afford to lose any sharpness or it will become too fuzzy. I have read on this forum that I should ignore such the quality before the movie is created (rendered?) and that all be well when saved as a movie.
2. From Finale I exported each page as a PDF (that my only choice). Concerted the PDFs to .png files. I tried normal and high quality. The higher quality (larger) the png file, the worse it looked in VS. Using a movie template, I put the .png files in as "pictures" (pages) and then, again, I synced the music.
I've tried saving the above in about every format available but seem clear enough, especially once they get uploaded to youtube.
I know there are many parameters. The two most important things are size, that is, I want the score to go from top to bottom of the frame since the notes are small, and of course, clarity... crisp as possible.
-Do I want 60p/50 editing checked under "Settings"? I can't see what it does.
-I assume I want 4:3 ratio since these are portrait pages?? (If I have 16:9 unchecked, does that mean 4:3 becomes the default?)
-In screen capture, does a higher quality monitor make a clearer picture, or does it not matter?
-In YouTube I note that one has to click the gear and then select 1080p. If Auto is set then it seems to play at 720p? I've only come close to what I need by setting it to 1080p but I fear many will not even know that setting is there.
Bottom, line, is it possible to get a clear enough image on YouTube or is this just not doable? I haven't tried printing (in ink) the score then scanning the pages and loading them into a movie. Is that a better option perhaps?
View 9 Replies
View Related
