VideoStudio :: Error Message When Uploading Into YouTube Directly From Pro X3
Feb 7, 2012
I'm trying to upload a video into YouTube straight from my Video Studio ProX3. Was able to do it successfully with a video just 2 days ago but for some reason, doing a different video (same videocam & format) it's giving me this error message "The entity name must immediately follow the ',&' in the entity reference". And it won't upload or let me proceed. I have no clue what this means, i tried redoing it and changing the video file name and no luck.
View 1 Replies
ADVERTISEMENT
Jul 4, 2012
I been trying to Upload a video to YouTube and it keep messing with the sound every time or the video would be all choppy. Is it Corel VideoStudio Pro X5 or YouTube messing with the video. I am using the up-loader that is installed in the program . it used to work but now it mess up a lot of times.
View 1 Replies
View Related
Oct 17, 2010
how to configure an output file in the best possible format for uploading to youtube using VS X2. The youtube tutorial here is a bit out of date. My input file is as follows:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have been creating an mpg file but I think its better to create an mpeg4 file as it is smaller and quicker to upload I think. I also want to maintain the 16:9 format.
I found the following recommendations on the youtube website: YouTube can accept almost any video format for upload, but for most users we have found the following settings give the best results.
Video Format: H.264, MPEG-2 or MPEG-4 preferred
Aspect Ratio: Native aspect ratio without letterboxing (examples: 4:3, 16:9)
Resolution: 640x360 (16:9) or 480x360 (4:3) recommended
Audio Format: MP3 or AAC preferred
Frames per second: 30
Maximum length: 10 minutes (we recommend 2-3 minutes)
Maximum file size: 1 GB
My first question is - X2 has a built in mp4 "creator". Is this one OK or is the one downloaded and installed from divx.com better? What should the frame size be? On the compression tab what should the video settings be? As my input file is 25fps does that mean that my output should be the same even though youtube recommends 30fps?
View 14 Replies
View Related
Apr 8, 2013
I'm working with Lightroom 4.4 to upload photos to Blurb. Two weeks ago, I tried this with 44 page photobook and it worked fine. In the past few days, I made a new book (205 pages) and it simply give an error message in the middle of an uploading process. I'm wondering if starting this all over again is the only option. The error message simply states there was an error during the uploading process and nothing more.
View 1 Replies
View Related
Oct 2, 2013
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies
View Related
Mar 17, 2014
When I upload image files to my computer hardrive, they open directly into Lightroom 5. How can i prevent this?
View 1 Replies
View Related
Feb 13, 2014
when I upload a video to You Tube, I get a warning message that my video and audio are out of synch. Once uploaded, the video plays just fine, looks great. But I don't know why I get the warning when I upload. Video clip and audio track are the same length.
View 1 Replies
View Related
Mar 31, 2010
As it did not working well in Win7, I have been uninstalling VS Pro X2. So, I purchased the downloadable upgrade version of VideoStudio Pro X3. The problem : I'm not able to open an existing VSP file. I get this error message : The file "name.vsp" is already in use.
View 14 Replies
View Related
Mar 18, 2013
I've been a Corel Video Studio user for almost 10 years and never ran into this issue. When creating a disc (DVD or Blu Ray), I get an error message while the program is "converting the menues" for burning to blank disc. The message reads "convert step got some problems (257.0.0)". Figuring that something got corrupted, I closed the program and rebooted the computer. I then again set up the menues I wanted to use only to get the same error message. I then decided to burn a previous project that I knew to be successful and it burned properly. I then decided to create a new project using the same video files and menus that previously failed. That too proved to be unsuccessful. I went to Corel's website but there was no info available covering my error message.
View 2 Replies
View Related
Dec 29, 2010
I thought i was getting this message when i enabled ripple select all but now i am randomly getting this message anytime i am using VS. I use VIDEOSTUDIO PRO X3 and i believe i have updated the necessary updates for it . After i get this message, it shuts down VS and i have to restart the program.
View 6 Replies
View Related
May 25, 2009
When I go to import a clip into videostudio, I get this message: "no storage to save BB" I click ok, then I get the "load from stream error" message.
Here is my info:Windows XP, videostudio 12, Dell Dimension E520. I'm importing an uncompressed AVI (I've done this loads of times with not problems) and I get the message while it's importing.
View 10 Replies
View Related
Sep 2, 2012
I've recently updated one of my PC's. I tried to launch VS x5 and I received a "corrupt file message" with error code 38. I've read all of the previous threads here and others online referring to Protexis Licensing V2 in the Services tab. I've un-installed, reinstalled several times. Would be nice is a "Repair" option was available. I've entered the serial numbers, several times, made it to the "Register Product" page but can never get the program to start. This was an update from VS 4 and I've entered the serial number for that when prompted. I have the program working just fine on another completely new system. Both are running Windows 7.
View 1 Replies
View Related
Jan 20, 2012
Just installed ProX4. When I make a title - either single or multiple - and try to apply a Border/Shadow/Transparency to the text, I get an error message that says . . .
"Encountered An Improper Argument"
Making the title was the ONLY thing in the project.
View 8 Replies
View Related
Jun 29, 2011
I completed a video and when I went to 'Create a Video File' I would receive the following error message...
"Failed to open MPEG encoder"
I'm using Ulead VideoStudio 11+. The 'vsp' file is too long...One hour fourteen minutes. I made a 'Part 1' and cut the vsp to forty-five minutes and still received the same error message.
I cut the 'vsp' to one minute thirty seconds and it would "Create a Video File'. I've never had this problem before.
It seems with Ulead VideoStudio 11+ whenever I have a problem like this I can resolve it, by backing up all the files, then removing the program, thoroughly clean the hard drive and re-install 11+.
View 1 Replies
View Related
Oct 23, 2013
For some inexplicable reason, the 'Smartsounds' tracks I load into the time line do not RENDER. That is, the 'share' button creates the suitable video file without the music! Their is a message, "Load from Stream Error" which comes up after the rendering process.
View 6 Replies
View Related
May 21, 2012
Error message showing on Video Studio Pro X2 - when go into edit, pop up message dispays 'Load From Stream Error' which then doesn't allow me to anything further.
View 5 Replies
View Related
Jul 25, 2011
I have a clip and want to load to youtube. VideoStudio starts and setp 1 is login to youtube. Tells me The login requested a user name or password not recognized. I have manually just logged on to Youtube with the same username and password. No problems.
View 2 Replies
View Related
Dec 23, 2010
Right at the end of it being uploaded I get this message
<?xml version= ‘1.0’
Encoding=’UTF-8’?><errors><error><domain>yt:validation</domain><code>too_long</code><location
Type=’xpath’>media:group/media:keywords/text()</location></error>
</errors>
The video is only 3:45, so it doesn't exceed 10 minutes, I uploaded videos successfully when I had the trial version and whenever I try to upload it to youtube on the purchased version, it gives me the error above, and does not put the video on youtube, what is the problem?
View 7 Replies
View Related
Mar 26, 2012
I'm now running X5, I must say it is much faster. However, when I try to upload to youtube there is a 15 minute limit and the only option I have is to let it clip the video to 15 minutes or cancel (i.e. I can't render the video and then cancel the upload and do it manually because it CLIPPED the output to 15 minutes)
So, I try to create a template to use for Create Video File so it will match my other uploads. I can't set the frame width and height. Without a template the Create Video File, mp4 etc... the default is 1920x... In the Make Movie Template the highest I can set it is 720x... the custom size is greyed out. I don't understand (and maybe I don't know) why I can't set the video parameters to anything I want them to be. Why is 720x the highest available...
In X5... Is there a way to turn off the 15 minute limit? Is there a way to HACK and turn off the limit? Is there a way to create the videos and set the settings where I want them so they match my previous uploads?
Note, the "cancel the upload after file created" trick no longer works. If you think I can create a template, why I can't set the parameters.
View 5 Replies
View Related
Sep 15, 2011
My YouTube-account is upgradet for files ut to 20gb, and naturally longer than 15min. But my Corel VideoStudio PRO x4 does not want me to automaticly upload longer files than 15 minutes.
View 4 Replies
View Related
Oct 1, 2013
I'm using Corel videostudio Ultimate X6 and regularly record live bands, upload them to youtube after I convert them to a MP4 format using videostudio. A few months ago one of the venues installed a set of quick flashing lights, now my videos look blocky and you can't even make out their faces.
View 8 Replies
View Related
Feb 8, 2013
I am using Video Studio X4. if I can capture You Tube videos for future viewing off line. I am a fairly new user and really need some detailed instructions if it can be done. There are some really informative tutorials regarding my husband's GPS unit and other gadgets but we don't always have access to an internet connection.
View 6 Replies
View Related
Jan 14, 2012
How do I upload existing movies from DVD or youtube into the program for editing. When I follow the instructions it says "No valid content." Is it protected?
View 2 Replies
View Related
Jan 5, 2013
I can only upload 15 minute videos on Video studio x5. I cant find anywhere on the internet on how to change my login settings so I can upload past the 15 mark. I am verified from youtube to upload longer videos. Im getting sick of waisting my time saving it as a WMV and then going to youtube to upload it that way. My upload speed is slow enough already
So, How do you change youtube settings on Corel Videostudio Pro x5?
Picture wise,How can I not get this error when uploading to youtube?
View 5 Replies
View Related
Jan 21, 2011
I just finished building my first "serious" (i.e., with lots of clips, titles, sound track, etc.) video for YouTube. It runs about 7 minutes.
I used Video Studio 8 to develop the project. I tried rendering it in the .avi format with no compression, and ended up with something that runs slowly and has the audio badly out of synch. The file size, of course, is huge.
What format and settings are recommended for a project that is going to be put on YouTube? (I would like to use 640 x 480 if possible. That's the size used to build the project).
View 2 Replies
View Related
Nov 21, 2010
I am getting an application error when I try to upload to Youtube. It fails at the end of the upload process. I cant copy the error, see attachment for message.
Windows 7 x64
Asus Mb-P7P55D-E
4gb ram
1TB hd
Nvidia 9600
View 2 Replies
View Related
Aug 3, 2011
How to override the 15 min limit while export to youtube ? My account does not have 15 min limit so why the corel application forces me that limit
and
i cannot find other settings to make so good video "1280 * 720" 25 frames etc that are used when clicking youtube button.
Want semi-HD (not full-hd) but it would nice to be able to adjust the bit rate so that the size is under 2gb
View 4 Replies
View Related
Apr 27, 2013
I am trying to create a video clip from FRAPS movies for uploading on YouTube. There seems to be absolutely no way to encode the video in HD. Either the encoding is extremely slow ans hangs at 4% without any further progress, I end up with a 2.5Gb file or I have to give up on HD and encode in 480p. Each and every format I try blocks the resolution at 720p or makes all options grayed out, not allowing, e.g., to change resolution, compression settings, etc. All MPEG profiles lead to 480p. All HDV profiles are super slow and/or result in 2.5Gb files. The QuickTime profile I tried would not compress the audio at all.
So it seems I have to produce a huge file with VideoStudio and process it with another encoder, which is just a painful nonsense that will degrade the quality of my output! I also tried the YouTube output, seemed to work, but trimmed down my video to 15 minutes. BUT WHY??? YouTube CAN accept videos longer than 15 minutes! Moreover, after all these futile attempts, the program crashes or hangs on me! I just don't know what to do next.
View 9 Replies
View Related
Aug 20, 2013
I just purchased x6. Here's what I'm trying to do...
I am a composer and I want to create "score perusal" videos of my music which I will upload to YouTube and embed on my website. I compose using a software notation program called Finale. There are two "views" in Finale:
1. Page view: the score looks just like an actual score with pages numbers, the notes, words, etc. showing one page at a time
2. Scroll view where the score is laid out horizontally.
In either view, I can "play" the score while a green line follows the music, turning pages (in page view) or scrolling horizontally (in scroll view). I can also "print" the pages as PDFs (but not as images).
Here's what I've tried in VSx6:
1. Using Screen Capture, I recorded the score as it scrolled across the screen. I put that Screen Capture in the video track and then imported the audio into the music track and synced it up. In VSx6 when I played it back using "project," the score looks bad (fuzzy). If I play back only the scrolling score (iow, no audio) it looks good (not razor sharp but legible), however, it can't afford to lose any sharpness or it will become too fuzzy. I have read on this forum that I should ignore such the quality before the movie is created (rendered?) and that all be well when saved as a movie.
2. From Finale I exported each page as a PDF (that my only choice). Concerted the PDFs to .png files. I tried normal and high quality. The higher quality (larger) the png file, the worse it looked in VS. Using a movie template, I put the .png files in as "pictures" (pages) and then, again, I synced the music.
I've tried saving the above in about every format available but seem clear enough, especially once they get uploaded to youtube.
I know there are many parameters. The two most important things are size, that is, I want the score to go from top to bottom of the frame since the notes are small, and of course, clarity... crisp as possible.
-Do I want 60p/50 editing checked under "Settings"? I can't see what it does.
-I assume I want 4:3 ratio since these are portrait pages?? (If I have 16:9 unchecked, does that mean 4:3 becomes the default?)
-In screen capture, does a higher quality monitor make a clearer picture, or does it not matter?
-In YouTube I note that one has to click the gear and then select 1080p. If Auto is set then it seems to play at 720p? I've only come close to what I need by setting it to 1080p but I fear many will not even know that setting is there.
Bottom, line, is it possible to get a clear enough image on YouTube or is this just not doable? I haven't tried printing (in ink) the score then scanning the pages and loading them into a movie. Is that a better option perhaps?
View 9 Replies
View Related
Jan 25, 2011
I am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
View 8 Replies
View Related
Apr 19, 2011
I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies
View Related
