VideoStudio :: X5 - YouTube Upload Limit
Mar 26, 2012
I'm now running X5, I must say it is much faster. However, when I try to upload to youtube there is a 15 minute limit and the only option I have is to let it clip the video to 15 minutes or cancel (i.e. I can't render the video and then cancel the upload and do it manually because it CLIPPED the output to 15 minutes)
So, I try to create a template to use for Create Video File so it will match my other uploads. I can't set the frame width and height. Without a template the Create Video File, mp4 etc... the default is 1920x... In the Make Movie Template the highest I can set it is 720x... the custom size is greyed out. I don't understand (and maybe I don't know) why I can't set the video parameters to anything I want them to be. Why is 720x the highest available...
In X5... Is there a way to turn off the 15 minute limit? Is there a way to HACK and turn off the limit? Is there a way to create the videos and set the settings where I want them so they match my previous uploads?
Note, the "cancel the upload after file created" trick no longer works. If you think I can create a template, why I can't set the parameters.
View 5 Replies
ADVERTISEMENT
Aug 3, 2011
How to override the 15 min limit while export to youtube ? My account does not have 15 min limit so why the corel application forces me that limit
and
i cannot find other settings to make so good video "1280 * 720" 25 frames etc that are used when clicking youtube button.
Want semi-HD (not full-hd) but it would nice to be able to adjust the bit rate so that the size is under 2gb
View 4 Replies
View Related
Dec 23, 2010
Right at the end of it being uploaded I get this message
<?xml version= ‘1.0’
Encoding=’UTF-8’?><errors><error><domain>yt:validation</domain><code>too_long</code><location
Type=’xpath’>media:group/media:keywords/text()</location></error>
</errors>
The video is only 3:45, so it doesn't exceed 10 minutes, I uploaded videos successfully when I had the trial version and whenever I try to upload it to youtube on the purchased version, it gives me the error above, and does not put the video on youtube, what is the problem?
View 7 Replies
View Related
Sep 15, 2011
My YouTube-account is upgradet for files ut to 20gb, and naturally longer than 15min. But my Corel VideoStudio PRO x4 does not want me to automaticly upload longer files than 15 minutes.
View 4 Replies
View Related
Nov 21, 2010
I am getting an application error when I try to upload to Youtube. It fails at the end of the upload process. I cant copy the error, see attachment for message.
Windows 7 x64
Asus Mb-P7P55D-E
4gb ram
1TB hd
Nvidia 9600
View 2 Replies
View Related
Apr 19, 2011
I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies
View Related
Oct 2, 2013
On the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies
View Related
Jan 2, 2012
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies
View Related
May 2, 2013
How can a upload animation from Photoshop on youtube, as a youtube video ?
View 1 Replies
View Related
Feb 24, 2014
I shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen.
View 13 Replies
View Related
Feb 25, 2014
Is there any way to uploading Edge Animation animations on Vimeo or Youtube? (using v. 1.5)
View 1 Replies
View Related
Mar 21, 2014
i do not know much about color spaces. But I do know that different forms of media require using different colors (RGB, CMYK, all that stuff).
wrong color space or exporting formats.
What do I need to do to get the final video that I exported to look exactly the same (in terms of color) when it's uploaded on YouTube? Strictly just the color, because I understand quality goes down when uploaded to YouTube.
View 1 Replies
View Related
Jul 4, 2012
I been trying to Upload a video to YouTube and it keep messing with the sound every time or the video would be all choppy. Is it Corel VideoStudio Pro X5 or YouTube messing with the video. I am using the up-loader that is installed in the program . it used to work but now it mess up a lot of times.
View 1 Replies
View Related
Jul 25, 2011
I have a clip and want to load to youtube. VideoStudio starts and setp 1 is login to youtube. Tells me The login requested a user name or password not recognized. I have manually just logged on to Youtube with the same username and password. No problems.
View 2 Replies
View Related
Oct 1, 2013
I'm using Corel videostudio Ultimate X6 and regularly record live bands, upload them to youtube after I convert them to a MP4 format using videostudio. A few months ago one of the venues installed a set of quick flashing lights, now my videos look blocky and you can't even make out their faces.
View 8 Replies
View Related
Feb 8, 2013
I am using Video Studio X4. if I can capture You Tube videos for future viewing off line. I am a fairly new user and really need some detailed instructions if it can be done. There are some really informative tutorials regarding my husband's GPS unit and other gadgets but we don't always have access to an internet connection.
View 6 Replies
View Related
Jan 14, 2012
How do I upload existing movies from DVD or youtube into the program for editing. When I follow the instructions it says "No valid content." Is it protected?
View 2 Replies
View Related
Jan 5, 2013
I can only upload 15 minute videos on Video studio x5. I cant find anywhere on the internet on how to change my login settings so I can upload past the 15 mark. I am verified from youtube to upload longer videos. Im getting sick of waisting my time saving it as a WMV and then going to youtube to upload it that way. My upload speed is slow enough already
So, How do you change youtube settings on Corel Videostudio Pro x5?
Picture wise,How can I not get this error when uploading to youtube?
View 5 Replies
View Related
Jan 21, 2011
I just finished building my first "serious" (i.e., with lots of clips, titles, sound track, etc.) video for YouTube. It runs about 7 minutes.
I used Video Studio 8 to develop the project. I tried rendering it in the .avi format with no compression, and ended up with something that runs slowly and has the audio badly out of synch. The file size, of course, is huge.
What format and settings are recommended for a project that is going to be put on YouTube? (I would like to use 640 x 480 if possible. That's the size used to build the project).
View 2 Replies
View Related
Apr 27, 2013
I am trying to create a video clip from FRAPS movies for uploading on YouTube. There seems to be absolutely no way to encode the video in HD. Either the encoding is extremely slow ans hangs at 4% without any further progress, I end up with a 2.5Gb file or I have to give up on HD and encode in 480p. Each and every format I try blocks the resolution at 720p or makes all options grayed out, not allowing, e.g., to change resolution, compression settings, etc. All MPEG profiles lead to 480p. All HDV profiles are super slow and/or result in 2.5Gb files. The QuickTime profile I tried would not compress the audio at all.
So it seems I have to produce a huge file with VideoStudio and process it with another encoder, which is just a painful nonsense that will degrade the quality of my output! I also tried the YouTube output, seemed to work, but trimmed down my video to 15 minutes. BUT WHY??? YouTube CAN accept videos longer than 15 minutes! Moreover, after all these futile attempts, the program crashes or hangs on me! I just don't know what to do next.
View 9 Replies
View Related
Aug 20, 2013
I just purchased x6. Here's what I'm trying to do...
I am a composer and I want to create "score perusal" videos of my music which I will upload to YouTube and embed on my website. I compose using a software notation program called Finale. There are two "views" in Finale:
1. Page view: the score looks just like an actual score with pages numbers, the notes, words, etc. showing one page at a time
2. Scroll view where the score is laid out horizontally.
In either view, I can "play" the score while a green line follows the music, turning pages (in page view) or scrolling horizontally (in scroll view). I can also "print" the pages as PDFs (but not as images).
Here's what I've tried in VSx6:
1. Using Screen Capture, I recorded the score as it scrolled across the screen. I put that Screen Capture in the video track and then imported the audio into the music track and synced it up. In VSx6 when I played it back using "project," the score looks bad (fuzzy). If I play back only the scrolling score (iow, no audio) it looks good (not razor sharp but legible), however, it can't afford to lose any sharpness or it will become too fuzzy. I have read on this forum that I should ignore such the quality before the movie is created (rendered?) and that all be well when saved as a movie.
2. From Finale I exported each page as a PDF (that my only choice). Concerted the PDFs to .png files. I tried normal and high quality. The higher quality (larger) the png file, the worse it looked in VS. Using a movie template, I put the .png files in as "pictures" (pages) and then, again, I synced the music.
I've tried saving the above in about every format available but seem clear enough, especially once they get uploaded to youtube.
I know there are many parameters. The two most important things are size, that is, I want the score to go from top to bottom of the frame since the notes are small, and of course, clarity... crisp as possible.
-Do I want 60p/50 editing checked under "Settings"? I can't see what it does.
-I assume I want 4:3 ratio since these are portrait pages?? (If I have 16:9 unchecked, does that mean 4:3 becomes the default?)
-In screen capture, does a higher quality monitor make a clearer picture, or does it not matter?
-In YouTube I note that one has to click the gear and then select 1080p. If Auto is set then it seems to play at 720p? I've only come close to what I need by setting it to 1080p but I fear many will not even know that setting is there.
Bottom, line, is it possible to get a clear enough image on YouTube or is this just not doable? I haven't tried printing (in ink) the score then scanning the pages and loading them into a movie. Is that a better option perhaps?
View 9 Replies
View Related
Jan 25, 2011
I am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
View 8 Replies
View Related
Feb 7, 2012
I'm trying to upload a video into YouTube straight from my Video Studio ProX3. Was able to do it successfully with a video just 2 days ago but for some reason, doing a different video (same videocam & format) it's giving me this error message "The entity name must immediately follow the ',&' in the entity reference". And it won't upload or let me proceed. I have no clue what this means, i tried redoing it and changing the video file name and no luck.
View 1 Replies
View Related
May 14, 2013
My camera films in AVCHD 1080, 25fps. I currently use VideoStudeo x6. i have been using it for a while and when i export for youtube videos, i find its only quality video when you change the youtube video to HD. Is there a way to set the video, so its still crisp and clear at 360p/480p, as i find its always distorted at these levels, although the footage is amazing in hd. What are the exact project properties i should set and the file export settings.
I am fully aware of the settings for youtube, however is it because iam filming in AVCHd i cant get that clean crisp look at lower levels on youtube? as the best setting for youtube are mpeg files. for reference please check this video i did: [URL]......
View 3 Replies
View Related
Nov 1, 2010
how can i get the full hd 1080 option for youtube on vs3
i have a full 1080i camera and yet when i want to upload this hd version to you tube it only offers up to 720 in vs3
View 1 Replies
View Related
Oct 17, 2010
how to configure an output file in the best possible format for uploading to youtube using VS X2. The youtube tutorial here is a bit out of date. My input file is as follows:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have been creating an mpg file but I think its better to create an mpeg4 file as it is smaller and quicker to upload I think. I also want to maintain the 16:9 format.
I found the following recommendations on the youtube website: YouTube can accept almost any video format for upload, but for most users we have found the following settings give the best results.
Video Format: H.264, MPEG-2 or MPEG-4 preferred
Aspect Ratio: Native aspect ratio without letterboxing (examples: 4:3, 16:9)
Resolution: 640x360 (16:9) or 480x360 (4:3) recommended
Audio Format: MP3 or AAC preferred
Frames per second: 30
Maximum length: 10 minutes (we recommend 2-3 minutes)
Maximum file size: 1 GB
My first question is - X2 has a built in mp4 "creator". Is this one OK or is the one downloaded and installed from divx.com better? What should the frame size be? On the compression tab what should the video settings be? As my input file is 25fps does that mean that my output should be the same even though youtube recommends 30fps?
View 14 Replies
View Related
Jul 24, 2013
I am having difficulty generating a 43 minute video in .mp4 (1920x1080). I was able to successfully generate the (.mp4) video at 1280x720. I was also able to successfully generate an 11gb .wmv version and a 9gb .avi version. I have 120GB free space on a 500GB (NTFS) SSD.
Each time I try and generate the video using .mp4 and 1920x1080 the process dies after about 3 hours, always at 85% completion and the temporary work files created in the output directory are always very near 4gb (3.99gb) in size (but never over). That fact and the fact that I can generate all the other versions makes me wonder if there is some kind of 4GB limit to mp4 (in VideoStudio).
I have tried to do some research and it appears there are .mp4 files > 4gb in the wild but my version of Video Studio X5 Ultimate sure seems to have this limitation. If upgrading to X6 would fix this, I'd be happy to do this. But don't need to upgrade if it doesn't fix this issue.
I actually have 2 laptops (both Dell Latitudes) and have attempted to generate the video at the 1920x1080 resolution on both and both fail exactly the same way (85%, just under 4gb temp file).
Event viewer entry looks like this:
Faulting application name: vstudio.exe, version: 15.0.0.0, time stamp: 0x5149e750
Faulting module name: ntdll.dll, version: 6.1.7601.17725, time stamp: 0x4ec49b8f
Exception 0xc0000374
Fault offset: 0x000ce6c3
Faulting process id: 0x3108
Faulting application start time: 0x01ce87fcea000a4a
Faulting application path: C:Program Files (x86)CorelCorel VideoStudio Ultimate X5vstudio.exe
Faulting module path: C:WindowsSysWOW64
tdll.dll
Report Id: fcc5db0d-f409-11e2-a2b9-005056c00008
I am running 64-bit Windows 7 (Ultimate).
Is there a codec or driver or something I can download that might fix this? I'd have to mention although I've owned video editing software for years (beginning with Ulead - Media Studio Pro) I would not consider myself very well read in the technical video arena.
View 14 Replies
View Related
Aug 7, 2011
Any way reducing the number of fonts Videostudio offers? Many are so similar to each other there is little point in having the variety. Only about half in the list show examples of their style and many are not suitable for video, so there are a lot to click through and try when looking for something a bit different. I think, of the hundreds available, I would consider using only about 30. I am reluctant to completely get rid of most of them but it would save a lot of time if I could sort through them once initially and cull them into a group suitable for use in VS [and have VS offer only those].
View 3 Replies
View Related
Apr 7, 2012
I've been a long-time VideoStudio user and recently installed the trial of X5 (my last purchased version was X2, but, it's time for an upgrade ). VS X5 is installed on a Windows 7 Ultimate 64-bit PC. If I capture to an internal NTFS drive, the tapes capture as a single ~19 GB AVI file; however, if I capture to my Linux NAS server with ReiserFS file system, VS breaks the captured files into 4GB chunks and I end up with five files per tape. There is no 4GB file limit on ResierFS. I have copied several 25+ GB blue-ray files to the NAS with no problem. ReiserFS has an 8TB file size limit. Captured through another video editing program, I do not have this problem. It appears that VS X5 assumes a 4GB limit on network devices (or, at least, on my Linux - ReiserFS NAS).
View 1 Replies
View Related
Feb 9, 2013
I did not know there would be a size limit to fit a video file to a DVD. I thought the premise would be to fit any size video file to a DVD, and the the sell-out would be the larger the video file the poorer the DVD quality.
I got two error messages:
"The miminum size be reducing the bit rates still cannot fit once disc."
"Convert step got some problems."
What are the minimum requirements for fitting a video file to a DVD?
View 2 Replies
View Related
Aug 2, 2011
I am using VideoStudioPro X3 and I am having a problem with my Library folders and I am thinking the problem is a limit in the number of video library folders I can have. Here's what's going on.
1. I create a new library folder. Lets call it Test1
2. I copy my raw video from my camcorder to Test1.
3. When I pull down the list of Folders I see Test1.
4. When I select Test1, it brings me to the Images folder not the folder Test1.
I was thinking about upgrading to X4, if there is no limit on the number of folders I can have. If that is indeed the problem I am facing.
I really like using the folders in the Library Manager as it works to keep my videos organized instead of just dumping all of them in the Video Folder.
View 7 Replies
View Related
