ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 RepliesRight at the end of it being uploaded I get this message
<?xml version= ‘1.0’
Encoding=’UTF-8’?><errors><error><domain>yt:validation</domain><code>too_long</code><location
Type=’xpath’>media:group/media:keywords/text()</location></error>
</errors>
The video is only 3:45, so it doesn't exceed 10 minutes, I uploaded videos successfully when I had the trial version and whenever I try to upload it to youtube on the purchased version, it gives me the error above, and does not put the video on youtube, what is the problem?
I'm now running X5, I must say it is much faster. However, when I try to upload to youtube there is a 15 minute limit and the only option I have is to let it clip the video to 15 minutes or cancel (i.e. I can't render the video and then cancel the upload and do it manually because it CLIPPED the output to 15 minutes)
So, I try to create a template to use for Create Video File so it will match my other uploads. I can't set the frame width and height. Without a template the Create Video File, mp4 etc... the default is 1920x... In the Make Movie Template the highest I can set it is 720x... the custom size is greyed out. I don't understand (and maybe I don't know) why I can't set the video parameters to anything I want them to be. Why is 720x the highest available...
In X5... Is there a way to turn off the 15 minute limit? Is there a way to HACK and turn off the limit? Is there a way to create the videos and set the settings where I want them so they match my previous uploads?
Note, the "cancel the upload after file created" trick no longer works. If you think I can create a template, why I can't set the parameters.
My YouTube-account is upgradet for files ut to 20gb, and naturally longer than 15min. But my Corel VideoStudio PRO x4 does not want me to automaticly upload longer files than 15 minutes.
View 4 Replies View RelatedI am getting an application error when I try to upload to Youtube. It fails at the end of the upload process. I cant copy the error, see attachment for message.
Windows 7 x64
Asus Mb-P7P55D-E
4gb ram
1TB hd
Nvidia 9600
How to override the 15 min limit while export to youtube ? My account does not have 15 min limit so why the corel application forces me that limit
and
i cannot find other settings to make so good video "1280 * 720" 25 frames etc that are used when clicking youtube button.
Want semi-HD (not full-hd) but it would nice to be able to adjust the bit rate so that the size is under 2gb
I've got some AVIs to upload to YouTube. Thing is doesn't X2 have a function to allow you to upload video files from there? It's got the YouTube icon but for the life of me I can't get it to recognize my files.
View 2 Replies View RelatedOn the newest addition of Corel VideoStudio, I've been trying to upload a video to youtube (a 30 second one). Everytime, right before it's finished uploading on Corel I get the error message 'Upload failed due to a connection error. Please check your connection and try again'. I've tried uploading it to 4Mpeg-HD and MPEG-4. I've tried converting the video to various different files (Avi 750x576, MP4 704x480, etc). My computer's internet is perfectly fine and extremely fast, without any lag. I'm hoping to upload the video through Corel only because, despite my fast internet, I waited over ten minutes on a manual upload for the same video on youtube and after those ten minutes were up it was still at only 4%.
View 1 Replies View RelatedMy camera films in AVCHD 1080, 25fps. I currently use VideoStudeo x6. i have been using it for a while and when i export for youtube videos, i find its only quality video when you change the youtube video to HD. Is there a way to set the video, so its still crisp and clear at 360p/480p, as i find its always distorted at these levels, although the footage is amazing in hd. What are the exact project properties i should set and the file export settings.
I am fully aware of the settings for youtube, however is it because iam filming in AVCHd i cant get that clean crisp look at lower levels on youtube? as the best setting for youtube are mpeg files. for reference please check this video i did: [URL]......
How can a upload animation from Photoshop on youtube, as a youtube video ?
View 1 Replies View RelatedI am using Video Studio Pro X2 to work with standard definition 16:9 .avi files captured from a mini dv camera.
Normally when I finish a project I just create a video file using the Same As Project Settings option to create a .avi file with no compression for playback on my PC.
I tried using the youtube uploader and was shocked how poor the video quality was...In the past I have experimented with creating a video file for youtube but my video's always appeared to be jumpy and miss frames once uploaded and took a long time to load, I read somewhere once to save the video as a HD .wmv file which did improve the picture quality a lot but didn't solve the missing frames or the long load time.
How to create a video file for youtube using Video Studio X2?
I shoot in 16:9 on the canon t3i, however when I upload my videos to YouTube there is a black bar on the left and right. The canon team said there should be a setting in premiere to make my videos full screen.
View 13 Replies View RelatedIs there any way to uploading Edge Animation animations on Vimeo or Youtube? (using v. 1.5)
View 1 Replies View Relatedhow to configure an output file in the best possible format for uploading to youtube using VS X2. The youtube tutorial here is a bit out of date. My input file is as follows:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have been creating an mpg file but I think its better to create an mpeg4 file as it is smaller and quicker to upload I think. I also want to maintain the 16:9 format.
I found the following recommendations on the youtube website: YouTube can accept almost any video format for upload, but for most users we have found the following settings give the best results.
Video Format: H.264, MPEG-2 or MPEG-4 preferred
Aspect Ratio: Native aspect ratio without letterboxing (examples: 4:3, 16:9)
Resolution: 640x360 (16:9) or 480x360 (4:3) recommended
Audio Format: MP3 or AAC preferred
Frames per second: 30
Maximum length: 10 minutes (we recommend 2-3 minutes)
Maximum file size: 1 GB
My first question is - X2 has a built in mp4 "creator". Is this one OK or is the one downloaded and installed from divx.com better? What should the frame size be? On the compression tab what should the video settings be? As my input file is 25fps does that mean that my output should be the same even though youtube recommends 30fps?
i do not know much about color spaces. But I do know that different forms of media require using different colors (RGB, CMYK, all that stuff).
wrong color space or exporting formats.
What do I need to do to get the final video that I exported to look exactly the same (in terms of color) when it's uploaded on YouTube? Strictly just the color, because I understand quality goes down when uploaded to YouTube.
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I been trying to Upload a video to YouTube and it keep messing with the sound every time or the video would be all choppy. Is it Corel VideoStudio Pro X5 or YouTube messing with the video. I am using the up-loader that is installed in the program . it used to work but now it mess up a lot of times.
View 1 Replies View RelatedI have a clip and want to load to youtube. VideoStudio starts and setp 1 is login to youtube. Tells me The login requested a user name or password not recognized. I have manually just logged on to Youtube with the same username and password. No problems.
View 2 Replies View RelatedWhen I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedI've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
How to manage files and projects in VideoStudio X4 properly? When I create a new project, all the old libraries pop up --if I archive the files, it goes through and attempts to relink all the older project files, forcing me to sit there and hit "don't relink" for every file (which involves hundreds of files). Now suppose I go through all of this, start with clean libraries, and build a new project --but a month later, I need to open an old project and make some tweaks to it. Since the libraries are empty, when I go to open the old project, it wants to relink all the files again.
This total lack of file and project management is really maddening --couldn't the libraries be included as part of the project? I understand the original files can't be, but at least include a library collection in with the project information, so you don't end up unable to archive older material you're not currently using (forever), unless you want to risk blowing up any possibility of ever opening that project again (forever).
Or is there some way to create a project with a clean set of libraries, and then reload a set of libraries later on?
I downloaded a 20 sec RAW .mts clip taken with a Panasonic TM700. I wanted to test it in VS X3 to see if the program would handle the file.
I noticed that when selecting "Project" to play the file in the preview window that certain elements of the clip look very noisy or overly sharp...Grainy, if you will. Other elements look slightly blurred. The playback seems smooth though.
However, If selecting "Clip" it looks much better. When I drag the sliders to expand the preview window to it's max size, the "Clip" playback looks flawless yet the "Project" playback, while slightly better, still looks less than desirable.
1). Why?
Here are the properties copied from the Time-line.
2)assuming I were to edit several clips from this camera in X3 to create a short 5-10 min film for upload to Vimeo, how would I best render to maintain the highest quality?
Before I decide to buy this camera, I just want to be sure that X3 can handle the files and that I have a fairly decent grasp of how to properly render the final video. In the mean time, I'll keep editing some sample clips and see how the program handles them. I'll also attempt to render a short film or 2 and see how that goes.
I'm using Corel videostudio Ultimate X6 and regularly record live bands, upload them to youtube after I convert them to a MP4 format using videostudio. A few months ago one of the venues installed a set of quick flashing lights, now my videos look blocky and you can't even make out their faces.
View 8 Replies View RelatedI am using Video Studio X4. if I can capture You Tube videos for future viewing off line. I am a fairly new user and really need some detailed instructions if it can be done. There are some really informative tutorials regarding my husband's GPS unit and other gadgets but we don't always have access to an internet connection.
View 6 Replies View RelatedHow do I upload existing movies from DVD or youtube into the program for editing. When I follow the instructions it says "No valid content." Is it protected?
View 2 Replies View RelatedI can only upload 15 minute videos on Video studio x5. I cant find anywhere on the internet on how to change my login settings so I can upload past the 15 mark. I am verified from youtube to upload longer videos. Im getting sick of waisting my time saving it as a WMV and then going to youtube to upload it that way. My upload speed is slow enough already
So, How do you change youtube settings on Corel Videostudio Pro x5?
Picture wise,How can I not get this error when uploading to youtube?
I just finished building my first "serious" (i.e., with lots of clips, titles, sound track, etc.) video for YouTube. It runs about 7 minutes.
I used Video Studio 8 to develop the project. I tried rendering it in the .avi format with no compression, and ended up with something that runs slowly and has the audio badly out of synch. The file size, of course, is huge.
What format and settings are recommended for a project that is going to be put on YouTube? (I would like to use 640 x 480 if possible. That's the size used to build the project).
I am successfully creating a DVD using the Create Disc (DVD) option under the Share menu. I am adding multiple Project files that I have created (.VSP) files to it. Once it is all set up, I select Burning Options add Copyright Information and then I have also clicked on the add Project File to the disc option. However once the disc is created, I cannot find the Project File (.VSP) on the disc.
I am using VideoStudio Pro X4 with all the patches to SP3 installed. PAL system, and I am not receiving any errors.
Am I missing something simple? Does the Project File added to the disc not use the same file extension?
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
I am trying to create a video clip from FRAPS movies for uploading on YouTube. There seems to be absolutely no way to encode the video in HD. Either the encoding is extremely slow ans hangs at 4% without any further progress, I end up with a 2.5Gb file or I have to give up on HD and encode in 480p. Each and every format I try blocks the resolution at 720p or makes all options grayed out, not allowing, e.g., to change resolution, compression settings, etc. All MPEG profiles lead to 480p. All HDV profiles are super slow and/or result in 2.5Gb files. The QuickTime profile I tried would not compress the audio at all.
So it seems I have to produce a huge file with VideoStudio and process it with another encoder, which is just a painful nonsense that will degrade the quality of my output! I also tried the YouTube output, seemed to work, but trimmed down my video to 15 minutes. BUT WHY??? YouTube CAN accept videos longer than 15 minutes! Moreover, after all these futile attempts, the program crashes or hangs on me! I just don't know what to do next.