VideoStudio :: Corrupted Project File
Feb 15, 2012
I've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.
View 2 Replies
ADVERTISEMENT
Dec 30, 2012
Everything was working fine with my VS PRO X5 program until after I downloaded and installed the following "Instant Template" from within VS. I chose the one which has a surfboard in it's bmp on the page with all the other Instant Projects to choose from.
C:UsersNEWDocumentsCorel VideoStudio ProVSPTemplate 039_HD-Project. I think that download might be corrupted because that's the ONLY thing I've downloaded/installed to VS before this happened.
Immediately after installing that project, my computer would freeze immediately as soon as I either loaded it up, or clicked on any of the icons such as "Instant Template," etc. Even CTRL/ALT/DELETE fails to operate normally.
All my system files are up-to-date, no viruses/malware found, rebooted computer to flush memory, etc. before starting VS. The same problem happens each time, and ONLY with Video Studio. Sometimes, if I wait 5 minutes or so while the hourglass is spinning and the top bar says "Video Studio is Not Responding," suddenly, it will then begin working. But, it works only until I click on the Instant Template choice again.
Question: How do I uninstall or else get rid of the VS additional downloaded files, SAFELY, without losing any of my previous creations and files, or VS default templates, etc.? Will I have to uninstall VS completely and reinstall it? If so, what is the correct procedure recommended to do that. I can no longer use my program.
View 5 Replies
View Related
Jan 3, 2014
I got this message when trying to load a WIP file: "The project could not be loaded, it may be damaged or contain outdated elements."
I've searched the forums as well as on other sources on how to deal with it. So far I've tried:
1. Check files on AutoSave folder. No luck. All 5 files gave the same message
2. Fix XML with XML wrench. Tried the "Check is Well Formed" & "Check is Valid" and both said ok"
3. Restarted PC. Same thing.
4. Move project and working files to other folders - same.
5. Created a blank project and tried to import sequence - no sequence show up.
6. Import from After Effects and Exported - no luck as well. Came up with a message saying there's no valid sequence.
Some info:
Adobe Premiere Pro 6.0
Windows 7 64bit
Using Plural Eyes plugin
View 8 Replies
View Related
Jan 2, 2014
i´m having a problem opening a premiere pro cs6 project from another computer. My partner can open the project in her computer, but when she sends me the project by mail and i try to open it in my computer i I get t the mesasage " Cannot load project". I´ve tried importing the project into another project but it doesn´t work.
View 2 Replies
View Related
Aug 22, 2011
I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
View 7 Replies
View Related
Jan 1, 2013
When I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies
View Related
Apr 12, 2012
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
View 5 Replies
View Related
Dec 3, 2011
How to manage files and projects in VideoStudio X4 properly? When I create a new project, all the old libraries pop up --if I archive the files, it goes through and attempts to relink all the older project files, forcing me to sit there and hit "don't relink" for every file (which involves hundreds of files). Now suppose I go through all of this, start with clean libraries, and build a new project --but a month later, I need to open an old project and make some tweaks to it. Since the libraries are empty, when I go to open the old project, it wants to relink all the files again.
This total lack of file and project management is really maddening --couldn't the libraries be included as part of the project? I understand the original files can't be, but at least include a library collection in with the project information, so you don't end up unable to archive older material you're not currently using (forever), unless you want to risk blowing up any possibility of ever opening that project again (forever).
Or is there some way to create a project with a clean set of libraries, and then reload a set of libraries later on?
View 2 Replies
View Related
Dec 22, 2010
I downloaded a 20 sec RAW .mts clip taken with a Panasonic TM700. I wanted to test it in VS X3 to see if the program would handle the file.
I noticed that when selecting "Project" to play the file in the preview window that certain elements of the clip look very noisy or overly sharp...Grainy, if you will. Other elements look slightly blurred. The playback seems smooth though.
However, If selecting "Clip" it looks much better. When I drag the sliders to expand the preview window to it's max size, the "Clip" playback looks flawless yet the "Project" playback, while slightly better, still looks less than desirable.
1). Why?
Here are the properties copied from the Time-line.
2)assuming I were to edit several clips from this camera in X3 to create a short 5-10 min film for upload to Vimeo, how would I best render to maintain the highest quality?
Before I decide to buy this camera, I just want to be sure that X3 can handle the files and that I have a fairly decent grasp of how to properly render the final video. In the mean time, I'll keep editing some sample clips and see how the program handles them. I'll also attempt to render a short film or 2 and see how that goes.
View 1 Replies
View Related
Aug 13, 2013
I am successfully creating a DVD using the Create Disc (DVD) option under the Share menu. I am adding multiple Project files that I have created (.VSP) files to it. Once it is all set up, I select Burning Options add Copyright Information and then I have also clicked on the add Project File to the disc option. However once the disc is created, I cannot find the Project File (.VSP) on the disc.
I am using VideoStudio Pro X4 with all the patches to SP3 installed. PAL system, and I am not receiving any errors.
Am I missing something simple? Does the Project File added to the disc not use the same file extension?
View 3 Replies
View Related
Jan 2, 2013
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
View 7 Replies
View Related
May 29, 2012
I have X5 and am trying to figure out how to get the specific entries in the Media File area to save with the project they were used and saved in.
If I use 5 video and 1 audio files in a saved project, I would like those 6 entries to show up in the media library each time I open the project.
Is there a way to do that?
View 2 Replies
View Related
Oct 17, 2011
I've seen a few references to this in the boards. The sound is like "bleeps" or "heartbeats" only when playing the project. To hear the normal sound, you have to play the file. But if you have an overlay track, this makes it impossible to see how the main track and the overlay track look together while listening to the sound.
One recommended "solution" says to look at a particular youtube video (link provided), which I did. I thought it would provide a solution, but all it is is a demonstration of the problem.
Some say to re-install x3 without the service pack. It seems to me I was having this problem before I downloaded the Service Pack, and I hoped the Service Pack would FIX this problem. That makes me doubtful that the suggested re-install of x3 without the service pack will resolve the problem. And doesn't the Service Pack have other important features that would be missing without it? It's hard to believe the only component to the Service Pack was to screw up the audio.
Furthermore, uninstalling x3 and re-installing it looks like a very long and complicated process. I don't understand why, if Corel is aware of the problem, they don't provide a patch or update that fixes it. Why is it left to the presumably tens of thousands of users to each go through the difficult uninstall and reinstall process?
Do I have to invest in x4 to resolve the problem? I'm very bothered by that. Is there any guarantee that x4 doesn't have the same problem? Corel is aware of a problem with x3 and their response is to shell out another $50 to $99 to fix it? How do I know that x4 doesn't have a major problem that when Corel becomes aware of it, their answer will be to pay yet another $50 to $99 to buy x5?
View 6 Replies
View Related
Jan 2, 2012
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies
View Related
Feb 2, 2012
If I have multiple project files (.VSP) with different properties, can I batch process the individual files to their own respectful files? That is, if A.vsp is a HD edited video file, B.vsp is a SD file, C.vsp is a SD with different bit rate and screen ratio, etc, can I batch render all the files while they keep their respective properties (Same As First Video Clip)?
View 2 Replies
View Related
May 18, 2011
I would like to create a Word/text file and import it into my Video Studio project file for the credits at the end of a play that I have taped.
View 6 Replies
View Related
Dec 11, 2011
When I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies
View Related
Oct 24, 2010
When I render a project selecting an “HDV” setting, the result is corrupted. Only about 40% of the image height is displayed. The bottom 10% of the image is inverted to the top, followed by the next 30%, and the balance (the top of the image) is absent. (Audio is normal.) No difference whether I play these files on the PC or on a PS3.
I am using VideoStudio Pro X2. My source files are video only. I do not use transitions or titles.
I capture the video files with a Canon Vixia HF200. They are MTS files, ranging in size from 10MB to 300MB each. I download them to a Dell Dimension 4600 using a USB 2.0 port.
I create smart proxy files and I am able to edit them normally.
Project properties:
·Duration = 5 to 10 mins
·NTSC drop frame (29.97 fps)
·MPEG files
·24 bits, 720 x 480, 29.97 fps
·Lower Field First
·(DVD-NTSC), 16:9
·Video data rate: Variable (Max. 8000 kbps)
·LPCM Audio, 48000 Hz, Stereo
I am able to burn them to a DVD normally. Until sometime in March 2010, I also was able to create HD video files normally. Those old projects had the same properties as above. Those old files still play normally. But if I create a new HD video file now, it is corrupted.
Output format = “create video file,” and “HDV 720 – 30p”
Output Properties:
·MPEG files
·24 bits, 1280 x 720, 29.97 fps
·Frame-based
·(MPEG-2) (Transport stream), 16:9
·Video data rate: 18300 kbps
·Audio data rate: 384 kbps
·MPEG audio layer 2, 48 KHz, Stereo
Error Codes = none
This problem affects all “HDV” and “Blu-ray” output formats. Other output formats are OK. The files burn to DVD OK. (I have not tried burning a AVCHD disk lately.)
I downloaded and installed the latest version of DirectX using the link in one of the “Announcements” at the top of this board. This did not solve the problem. (In fact, now if I render a file using HDV 720-30p it does not show at all, and no audio.)
I downloaded and installed the patch for VS Pro X2. This did not solve the problem.
View 3 Replies
View Related
Jan 1, 2013
I am trying to use Video Studio Pro X2 to create a DVD on my new Windows 7 PC. I have produced the project file (95 minutes) and am now ready to burn the disk. I have used the software before on my old PC (Windows XP) with no problems. From the "Share" menu I selected Create Disk and DVD.
I am trying to amend the Project Settings in order that the project file (lasting 95 minutes) fits nicely on a 4.7Gb Disk. I have set-up a Disk Template (which should hopefully produce a file about the right size) and want to select that template for my project. The problem I am having is that when I select Create Disk, the Project Settings button is not displayed, so I cannot select the template I have set-up. The Project Settings button should sit just to the right of the Settings and Options button on the bottom left of the screen, just under the main panel (according to page 146 in the manual), but on my screen (see image attached) all I can see is the Settings and Options button, and then a half-obscurred "Next" button (which should sit on the right of the page, but on my page it is on the left, partly hidden by the Settings and Options button). There is also no "Close" or "Change Display aspect ratio" buttons visible too, which are shown in the manual, but don't appear on my screen.
This is the first time I have used VS Pro X2 on my new Windows 7 PC - it worked fine on my old XP machine and I have never had this problem before. I am now using Windows 7 (64 bit version). I have tried doing a "Repair" to Pro X2 using Control Panel, but this has made no difference...I am still getting this corrupted page without the very button I need to change template. Any way I can create a file that is about the right size to fit on a 4.7Gb blank Disk.
View 3 Replies
View Related
Dec 29, 2012
today i downloaded gimp 2.8.2 for windows 8, but when i tried to run the installer it downloads halfway and then displays an error message.
it says something in the style of: An error occurred when trying to copy a file. The source file is corrupted.
View 7 Replies
View Related
Feb 21, 2013
working on a file, a sketch saved it and opened it many many times with no problems 3 days ago i looked for it but i cant seem to find it on my computer at all.i used a file recovery program just to get it back on my computer.but its now corrupted (could not complete request beacues its not a valid photoshop dcoument) .
tryed many ways to fix it its not working. im ready to try anything just tell me !i don't care if i cant edit or open the file on photoshop all i want is to be able to view it i just want to see it again! thats it.
View 3 Replies
View Related
Feb 22, 2013
While working on my Mac on a PBS file (just over 3GBs) it crashed while saving. Now when I open the file, it's a mesh of colors on the screen and only 1 layer and is now only 1.5GB. The file is stored on a WD Myworldbook and I have looked for a way to restore previous files but doesn't seem to be an option. There was no backup file made.
View 6 Replies
View Related
May 6, 2013
Is it possible to assign a project number to a project file and have it fill in the project Iproerties field?
View 2 Replies
View Related
Feb 28, 2013
I had spent my artwork for many days with so many effort and time, and it has been corrupted after a computer crash (not PSD crash). I am using Windows 7.
-What happened after: 1 black layer (around 59 MB)
-What happened before: Had multiple saves, 15+ layers (so why it is not back to the latest save?)
I tried: Previews in PSD, Bridge, using recovery programs (none worked), hex editor, searched for temp./restore previous version files (none) how to recover this file.
View 1 Replies
View Related
Jan 26, 2012
My computer crashed today while photoshop CS5.1 was saving/writing to a psd file. When I started my computer back up, and tried to open the file again, It only displayed 1 layer shown as a corrupted image (As Shown Below - the Red Image). When I click on the file in the "Open" window (The Gray Image Below), the psd shows up correctly in the Preview window but doesnt show correctly when opened.
I have lost all of my layers, by the way I have worked on this psd for weeks and I need some way to recover it. I have tried "corrupted psd recovery programs", they did not work. I have tried forums - I found no answer. I have tried locating the .tmp file but it is no where to be found.
Does photoshop have a cache or a history? maybe for previously saved versions of psd files? Or does Windows 7, 32 Bit have a file recovery method? I have tried a windows 7 recovery method but it only recovers files from previous restore points that may be weeks old. This is very important that I do my best to fix this psd file or at least recover some layers, I have put in too much time and effort.
View 67 Replies
View Related
Dec 2, 2012
It happened already twice. I am working in one of my layers, I am changing the levels , the image in that layer gets black. I cant undo or go back in history. In the history pallette the original picture at the top goes black. If I try to save, all the layers get corrupted, with missing arbitrary squares in all of them. The first time it happens the missing areas where white, the second time they change to black. The top picture in the history pallette maches the black or white color.
The small picture in the icon in my desktop looks normal , but when open is tottally corrupted. If I have other files open, all of them get corrupted also if I tried to save.
View 8 Replies
View Related
Aug 26, 2013
Update has failed several times. The update log states a file is corrupt and the program needs to be re-installed. How do I do this?
View 3 Replies
View Related
Jun 21, 2013
after working with a lot of layers, masks and clipping layers my file got corrupted. That happened in the past but I always found a way to fix it buy copying uncorrupted layers to a new file. Most of the time it was just one layer corrupted. But this time is big, it looks like the whole file is corrupted.
View 2 Replies
View Related
May 4, 2011
Any "fix" for issues with Corel PDF import "the file is corrupted" error? We do custom apparel and recently added an on-line design tool that exports in PDF. Corel cannot read the files so we are forced to import into AI then expert as an AI file to import into Corel. I am at the point where I believe if there was a book written with all the quirks of X5 it would be a telephone book in size.
View 2 Replies
View Related
Mar 12, 2013
I am getting the above error message when trying to open a grd file in Photoshop CS6. I don't beleive the file is bad or corrupted. How to get the file to open?
View 1 Replies
View Related
Oct 22, 2012
When working in channels and need to change a 90% black to 100% black, my entire file, other channels as well, gets corrupted with ranbom blocks of black. These blocks of black can not be changed or selected.
View 1 Replies
View Related
