I have X5 and am trying to figure out how to get the specific entries in the Media File area to save with the project they were used and saved in.
If I use 5 video and 1 audio files in a saved project, I would like those 6 entries to show up in the media library each time I open the project.
Is there a way to do that?
How do I get VSX4 stop auto saving a project to its own My Projects folder and save it to My Projects folder in my media hard drive G:What are the pros and cons with these two methods?
View 2 Replies View RelatedI've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
I have worked in Sony Vegas 9 and I was hoping Adobe Premier Pro CC was similar--- but its not. I can't figure out how to render and save a file as a windows media or mp3 or in any format for that matter.
View 4 Replies View RelatedFor some reason unknown to us the Project Browser has double entries for the current projects: that is, a project shows up twice, with the same job number and such.
Windows Explorer correctly shows only one project folder, and in the Project Browser selecting either entry will bring up the project correctly.So, functionally we could live with this but I'd like to clean this up and I think deleting either entry would actually delete the project.
I have several AVCHD folders I've copied to my HD in the last year from my Panasonic HDCSD20. Now I'm ready to edit them in VSX4. Is there any advantage to using "file/import media file to library" (which makes a copy in the working folder) vs just clicking on the folder icon and adding them? I've looked at the file size on both the original clip and the imported one and they are identical. It does seem as though VS extracts the original date and time shot and uses that as the imported file name,
View 2 Replies View RelatedLoaded a MPEG-4 Media File 3Gb, went to setting, clicked on Smart Proxy cue manager, waited 40min and clicked ok. I check my Smart proxy file manger and it was there. My power went out, when I reload CV my files in Proxy manager were no longer there, and my file is back to being slow and jerky, that means I have redo this again.
does this mean I have to cue manger every time I wish to work with the same file?
I used to know how to save my X5 configuration (screen layout, options settings etc.) by saving some registry entries. I've forgotten how to do that. I'm using 7 (not pro) now, how to do that again?
View 5 Replies View RelatedWon't save contact entries. Follow page 166 entries instructions but when I try to review from editor book is blank.
View 2 Replies View RelatedWhen I try to open a vsp project in X5 using Windows 7 I am getting an error message saying, File is already in use, and a number 15055:1:1. I have been using this computer with X5 and XP professional and it works fine. I have a selection of vsp files that I use as templates, the only time I have had this message before is when I had my template vsp files write protected, which I have stopped doing. I have now installed Windows 7 on this same computer but cant open any of my previous projects. These projects were created using X5.
View 3 Replies View RelatedI've got a project file that I've been working on for a few weeks. I made a couple of changes to it today and now it will not play through completely. It stalls right at the same spot each time and no matter what I delete in the project (trying to remove the offending element) it still stalls. What I mean by stall is that the player stops and the play button reappears. if I press play again, it plays a few frames and stops.
I'm using VideoStudio 4.
I have captured 16:9 DV CAM footage from a Sony A1 camera using ULead Video Studio 11, using a firewire, as AVI DV files and edited it in a project in the same format:
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I want to render it into the same to create an AVI master file.
I don't know about Audio data or Video data rates and how to set them for capture or rendering - I'm pretty new to editing.
ULead for creating the best quality output file at this stage, or do I just do a Same as Project Properties render? Are there any drawbacks / issues to those tips?
I'm using my HP Probook 4710s with 32 bit Windows, Intel Core 2 Duo T5870 / 2GHz (Dual Core) processor, 3GB Ram DDR2 SDRAM 800 MHz, 2MB-L2 cache memory, 512 MB video memory.
How to manage files and projects in VideoStudio X4 properly? When I create a new project, all the old libraries pop up --if I archive the files, it goes through and attempts to relink all the older project files, forcing me to sit there and hit "don't relink" for every file (which involves hundreds of files). Now suppose I go through all of this, start with clean libraries, and build a new project --but a month later, I need to open an old project and make some tweaks to it. Since the libraries are empty, when I go to open the old project, it wants to relink all the files again.
This total lack of file and project management is really maddening --couldn't the libraries be included as part of the project? I understand the original files can't be, but at least include a library collection in with the project information, so you don't end up unable to archive older material you're not currently using (forever), unless you want to risk blowing up any possibility of ever opening that project again (forever).
Or is there some way to create a project with a clean set of libraries, and then reload a set of libraries later on?
I downloaded a 20 sec RAW .mts clip taken with a Panasonic TM700. I wanted to test it in VS X3 to see if the program would handle the file.
I noticed that when selecting "Project" to play the file in the preview window that certain elements of the clip look very noisy or overly sharp...Grainy, if you will. Other elements look slightly blurred. The playback seems smooth though.
However, If selecting "Clip" it looks much better. When I drag the sliders to expand the preview window to it's max size, the "Clip" playback looks flawless yet the "Project" playback, while slightly better, still looks less than desirable.
1). Why?
Here are the properties copied from the Time-line.
2)assuming I were to edit several clips from this camera in X3 to create a short 5-10 min film for upload to Vimeo, how would I best render to maintain the highest quality?
Before I decide to buy this camera, I just want to be sure that X3 can handle the files and that I have a fairly decent grasp of how to properly render the final video. In the mean time, I'll keep editing some sample clips and see how the program handles them. I'll also attempt to render a short film or 2 and see how that goes.
I am successfully creating a DVD using the Create Disc (DVD) option under the Share menu. I am adding multiple Project files that I have created (.VSP) files to it. Once it is all set up, I select Burning Options add Copyright Information and then I have also clicked on the add Project File to the disc option. However once the disc is created, I cannot find the Project File (.VSP) on the disc.
I am using VideoStudio Pro X4 with all the patches to SP3 installed. PAL system, and I am not receiving any errors.
Am I missing something simple? Does the Project File added to the disc not use the same file extension?
I am using VS Pro X2 - I have 3 small MP4 files in my project timeline (filmed on my mobile phone) and for some reason although they play fine on the clip, the audio doesn't come out on the Project, or on the finished DVD, which is a real pain...I have 94 minutes of good quality DVD and 45 seconds of silence! If there was no audio at all I could understand it, but the MP4 clips all play fine on the "clip"...it''s just that when I play them under the 'Project', there is no audio.
My original DV files (which are all ok) are MPEG Audio Layer 2 files - 48000Hz, 16 Bit Stereo - bitrate 224kbps
The MP4 clips are MPEG AAC Audio files - 48000Hz, 16 Bit Stereo - bitrate 113kbps
I am having an issue when opening and saving files is very slow when I have a project active in the Project Navigator.
If I have an active project, and I open a file via Project Navigator or Windows Explorer, the process hangs for 15-20+ seconds at the 'Opening C:xxxxxxxxxxxxxxx.ac$' point, where it is creating the temporary file.
If I 'Close the current project' in the project browser and open the same file via Windows Explorer, the process takes less than a second.
I've seen a few references to this in the boards. The sound is like "bleeps" or "heartbeats" only when playing the project. To hear the normal sound, you have to play the file. But if you have an overlay track, this makes it impossible to see how the main track and the overlay track look together while listening to the sound.
One recommended "solution" says to look at a particular youtube video (link provided), which I did. I thought it would provide a solution, but all it is is a demonstration of the problem.
Some say to re-install x3 without the service pack. It seems to me I was having this problem before I downloaded the Service Pack, and I hoped the Service Pack would FIX this problem. That makes me doubtful that the suggested re-install of x3 without the service pack will resolve the problem. And doesn't the Service Pack have other important features that would be missing without it? It's hard to believe the only component to the Service Pack was to screw up the audio.
Furthermore, uninstalling x3 and re-installing it looks like a very long and complicated process. I don't understand why, if Corel is aware of the problem, they don't provide a patch or update that fixes it. Why is it left to the presumably tens of thousands of users to each go through the difficult uninstall and reinstall process?
Do I have to invest in x4 to resolve the problem? I'm very bothered by that. Is there any guarantee that x4 doesn't have the same problem? Corel is aware of a problem with x3 and their response is to shell out another $50 to $99 to fix it? How do I know that x4 doesn't have a major problem that when Corel becomes aware of it, their answer will be to pay yet another $50 to $99 to buy x5?
ok i am trying to upload a project to youtube and it says that it isn't a supported file. so i went online to look for a file converter and didnt find any that worked. how can i convert it from .vps to something i can upload on youtube/face book?
View 2 Replies View RelatedIf I have multiple project files (.VSP) with different properties, can I batch process the individual files to their own respectful files? That is, if A.vsp is a HD edited video file, B.vsp is a SD file, C.vsp is a SD with different bit rate and screen ratio, etc, can I batch render all the files while they keep their respective properties (Same As First Video Clip)?
View 2 Replies View RelatedIs there a simple way to align text when creating a list or several entries?
View 3 Replies View RelatedI would like to create a Word/text file and import it into my Video Studio project file for the credits at the end of a play that I have taped.
View 6 Replies View RelatedThis is similar to something I have asked for before regarding managing media in remote/networked machines. But I can't find a way to delete media (individual clips or folders) from a nother project within my machine without switching to/loading up that project. At present in 2012 and as far back as I can remember I have had the ability to move and manage media withing other projects on the host machine as well as remote/networked machine.
Is there a button/preference I'm missing as this is integral to the workflow I use.
I have looked everywhere for instructions on how to export a premiere pro project and sequence, and associated media, to final cut pro on another computer. Exporting the xml does not include the media files. Therefore when my editor opens up the xml file it fails. I have a feeling I need to use Media Encoder to export the media associated with the project. Yet I cannot find any guides or instructions for how to undertake this. My editor is using FCP 7 on another computer in another place, so I need to export 8 sequences/projects *with their media* to him via the internet (dropbox) so that he can do a final edit on his machine. I would even be happy just to be able to export a working AAF since that option also hasn't worked for us.
View 4 Replies View RelatedWhen I try and render my 23 minute project to WMV HD 720p it gets to 6% and says file reading error.
View 11 Replies View RelatedWhen I open my project the media associated with the project shows that it is loading in the lower left hand corner of the program. It gets to about 123 files left to load and then it stops. I then have to attempt to locate all the rest of files with the Link Media tool this works for a few files and then it stops responding. What is the problem and how do I keep my project linked to its media assets?
AE dynamic linked assets
AVCHD video shot on C100
I have cleared the media cache
Media is stored on a 8TB Raid 10 NAS connected with a Gigabit router. The NAS is on my desk connected directly to my computer through the router.
I'm trying unArchive a project and having difficulty linking the footage. The project opens fine, but cannot locate any of the media. The footage is in the same location as it previouly was. What am I missing?
View 3 Replies View RelatedMy assistant and I are working on 2 different computers tied to a server. We need to be able to pass sequences back and forth. Unfortunately, Premiere seems to be adding the associated media files with each sequence import. Our project has fast become a mess of duplicate media. Also, I noticed this "new feature" listed on the Adobe site: An option has been added to not consolidate duplicates on import.Will this fix this problem?
View 6 Replies View RelatedWhen I try to import clips into Smac 2013 using the 'Create Project Media' option, I get the following error:
Cannot Connect to Back Burner Manager
I recently had some problems with auto-save. I was working on a project when my computer stoped working and I had to force shutting down. However, my Premiere CC is set to auto-save every 15 minutes. When I went to see the auto-save files I didn't find my entire work. I had several sequences previously the one I was left with. What had happen?
View 1 Replies View RelatedVideo Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?