I used to know how to save my X5 configuration (screen layout, options settings etc.) by saving some registry entries. I've forgotten how to do that. I'm using 7 (not pro) now, how to do that again?
View 5 RepliesI want to create a .reg file to load automatically a dll.I would like to generate this file from Autocad (using a subroutine). The entries are:
[HKEY_CURRENT_USERSoftwareAutodeskAutoCADR18.1ACAD-9002:40AApplicationsSIMNET]
"DESCRIPTION"="Carga el archivo SIM.DLL"
"LOADCTRLS"=dword:00000002
"LOADER"="E:\acaddlls\SIM.dll"
"MANAGED"=dword:00000001
And I need to obtain from autocad next path " AutodeskAutoCADR18.1ACAD-9002:40A" (is different for any versión of autocad).
When I am working I tend to open 50-100 jpeg images at a time, modify each one of them, and then close out and use the Save All option displayed on close. I am then prompted with the save configuration box for each and every image. Now I have honestly never once changed the quality from 95% before hitting okay. I know the save configuration box does save the quality settings, however I have found that when if I hit enter on the save configuration box too fast I end up with a partially corrupted thumbnail, meaning I have to wait a few seconds before hitting okay so this does not happen.
What would be a very large time saver for me and I'm sure many other users who work with large number of users at the same time would be a little checkbox that says "Do not display the Save Configuration box again for this session". If a user does need the Save Configuration box then they could just ignore this, however for users like me who do not want to change the quality, this would be a large time saver.
I have PSP X2 on my laptop and it has developed a problem where it will not get through the initialization process. It comes up with the flash screen and after awhile the flash goes away and then nothing it just sits there and if you try to do anything you get a program not responding message and the only way out is to use the ctrl, alt, delete and exit manually. I have uninstalled the program and reinstalled it but this problem persists no matter what I do including going in and completely deleting everything corel from the hard drive.
how to completely flush the program and all the hidden files and registry entries so I can do a virgin install and start over without whatever glitch it has developed. There is an ini file or something that is staying on my computer and causing this problem.
I have X5 and am trying to figure out how to get the specific entries in the Media File area to save with the project they were used and saved in.
If I use 5 video and 1 audio files in a saved project, I would like those 6 entries to show up in the media library each time I open the project.
Is there a way to do that?
Won't save contact entries. Follow page 166 entries instructions but when I try to review from editor book is blank.
View 2 Replies View RelatedmyMacro.zip
Well here's a final overview of everything we did. Mouth is now dry from all the talkin'....Miller time!
I hope you enjoyed this lesson. The gms file is attached to this post also.
You will want to see parts 1-4 first if you haven't already:
Part 1 | Part 2 | Part 3 | Part 4
(PS Video size id 720pxX525px and may get cut off by the forum. Hopefully you can save it or view entire size)
cs_setInnerHtml('video_a67025bf-ffef-4d99-aa88-eb8b1396619e','');
In my quest to remove any unnecessary clicks I want to be able to set the default location when you press Save, Save As, Demote or 'Save and replace component'.
Default it will show up a file save as dialogue starting from my workspace. Or my last saved location. I believe this is stored in the registry and hope to Intelligent adjust these registry value's using VBA.
When diving into the registry I believe I found the right keys here:
HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialog
Problem 1:
- if i change them manually I don't find a difference in Inventor (If I change other things in the registry, this has an effect)
Problem 2:
how do I set them automatic using VBA? I've got the strings sFileLocation & sFileName true the rest of my code. So I would need to do something like:
Dim oRegFileSave as Regisry entryset oRegFileSave as
HKEY_CURRENT_USERSoftwareAutodeskInventorRegistryVersion17.0SystemPreferencesFileDialogLastFileSaveDialogoRegFileSave = sFileLocation & "/" & sFileName
For your information, these are the registry entry's I believe I need to adjust:
I want to save the configuration and state of the Track View in my workspace. So when I start up Max, the Track View opens up in the configuration I had when I last used Max, and/or in my saved workspace.
Even after I save my custom workspace, it doesn't save the track view. I have to manually open up the track view, dock it the way I want, and open up my custom layouts I had saved in the track view. This takes a lot of time.
Inventor 2013 on win7 64bit
In our College we use roaming profiles.
If I make changes to configuration while profile is "open" we run into lots of trouble including total dis-functioning of the mold design and OS does not recognize the inventor file extensions and more problems.
A work around solution we found is to completely un install the program from one computer while the profile is "open" so there will be no association between the profile and the local installations on all computers.
However, now I can not save the configuration changes in any of the class computers. ( our OS disk is protected against permanent changes and will reset itself on any restart reboot, unless an administrator does them).
I tried making changes to the configuration both as administrator user and also when giving the local user administrator privileges, but with no successes.
After rebooting, we lose all configurations.
In this lesson we will consolidate code to prevent code reuse. Follow along as we demonstrate by doing the following and more:
Apply a color to a form command button, loop form controls, and save and get the color from registry
Part 2 of 7
cs_setInnerHtml('video_43f4e134-ee93-489d-ba2f-80042d243821','');
[URL]
When I make a brush how can I save it for other projects. I have tried saving it with a template but it is gone next time I open the template.
View 5 Replies View RelatedI produce a colour brochure of approx 30 pages containing photos & details of our latest special offers every 2 weeks in Xara Designer Pro X9 (which is by far the best software that I have used for this type of work).
As each page is completed, I save the document as a XAR file then export it as a JPG in 2 sizes, a large one for printing & a smaller one that will become a pdf file for emailing to our customers.
I am looking to make the process more efficient and was wondering if there was any way to automate the saving of the 3 files in varying formats and filenames?
I have been looking at Graphics Converter Pro 2013 which converts XAR files to JPG but for some reason the resulting file is of very low quality.
I'm using the bullet list setting. I turned on the bullets for a line of text. I didn't like the default, so I re-set the margin settings on the ruler. Fine, I've got level one to my liking.
Created a second paragraph by splitting the first. This creates a second level one bullet. I then indent again to the second level, and reset the margin settings to my liking. Good for level two.
For the third line I want to go back to level one. So I press enter to create a new paragraph, and then press shift-tab to set the level up one to level one, and the margin settings are all back at the default for level one. They were not remembered by Xara.
So I re-set that paragraph the way I want level one. For level two I create another new paragraph from that paragraph, and the level two is back to the default settings for level two.
Is there any way to create a style that can be recalled, or new default setting for bullets to meet my liking?
I use XPE regularly to edit photos and save them in JPEG format to My Picture folders. However, since yesterday the files that get saved after editing, are no longer JPEGs but some unsupported file which cannot be opened. (See screen shot of properties.) I have tried everything I can think of to fix this, but the results are always the same.
If I edit the photographs with Picasa, there is no problem with the edited output to a folder.
If I save the XPE edited files to the Desktop instead of a folder, they are also alright. I am using Windows 7 Home.
What and where I can select/deselect to avoid saving as PDF as a single file per each page?
Currently have names like 1Page001.Layer 1.pdf etc... (the name in the Export dialog is 1.pdf)
I just purchased Xara Photo & Graphic Designer. It's fairly easy to work with. I'm used to Photoshop, but I needed something on the fly, as I'm not at home.
Why can't I save my Xara design as anything other than a .xar file?
This is frustrating! No print shop accepts a .xar file. When I try to save it, it only gives me the option to save it as .xar.
how to convert it to CMYK color.
This seemed like a big update and took a while on my multiple computers. Before the update I was having glitches exporting my xar drawings to jpg files. It was hit or miss with only small fragments saved, weird file extensions such as Einstein.xar.jpg, needing to save as instead, needing to type the extension, etc. I always had to check my save folder afterwards to make sure exporting worked. It seems like this is now solved and have not had a problem exporting since.
If I am working on a xar file and want to make a jpg file from it, is there any difference between exporting it as a jpg and saving it as a jpg?
I have a problem, Save As is not working. I usually do my work in Xara, Save, then Save As to whatever format I need.Just recently (last night), I did a Circle (from a template I have), put some text in it. Saved to .Xar format like always.
Then I tried to do a Save As -there was no Choices in the Files drop down -well, actually just two choices:
Xara Design Pro X (*.xar)
All Files (*.*)
I have some screen shots.
I am trying to save a line of text in PGD6 as a PNG so that it will have transparency. However, each time I export as a PNG and open as an image in my web design software it has a white background and is not tranparent. how to get it truly tranparent?
View 3 Replies View Relatedcan I get xara to use the 100% instead of 75% as a default?
I know how to save settings like this to documents, but as soon as I close all documents, the settings are gone, units settings too, it always forgets them, so annoying. Did I miss a save button?
Is it possible to Save a .xar file with security options... e.g. Password to Open / Password to Modify ?
View 8 Replies View RelatedI was trying to save a custom stereogram that is approximately 36" x 24" at 300dpi out of Stereogram Generator, the software I use to compile my stereogram images.
Normally I save to PNG but I kept getting Out of Memory errors.
I finally decided to try another file format and picked Photoshop PSD. Not only did the image save, it saved almost instantly even though the file size is 191 MB! I was able to save one PNG version but it took about 30 seconds and the file size was about 51 MB.Does the PNG format because of its file compression method require more system memory to compress the image?
I can't save for web to SVG format from illustrator CS6. The option isn't in the format list of the save for web dialogue; I only have gif, jpeg, png-8 and png-24. I am sure it used to be there, so where has it gone?
Have I got to do something in the process of setting up a new document?
Is there any way to default the "Area to Save" option on the export menu, to "Page"? This is nothing crucial, but it would save me some time, because I select that hundreds of times. If I could pre-define "Page", I would be even more happy
View 8 Replies View RelatedI have a working document, part of which should become a template for similar docs.
However the part that should become a template is not all that is in the document.
I guess I can turn off the eyeball of all layers or objects not meant to be part of the template but then the template will have all the extra junk in it (turned off).
Is there a better way than saving a copy of the doc, opening it and deleting all that is not meant to be template, then resave as template?
I have a software program that imports DXF files and converts them to its native format, so they can be used for simulations. I use ACad LT to convert DWG files to DXF for this purpose. Sometimes they don't import properly, so I may have to re-open and tweak the DXF several times to get it to import properly. (What can I say - the target application is published by the government; of course it has issues.) The point is that I often have to work extensively in the DXF format.
Every time I try to Save my changes, ACLT tries to save my DXF as a DWG. It pops up a Save As dialog (which I did not ask for) and defaults to a DWG - I have to go back down the list and re-find my DXF format. Every time. Every. Time. Then when I close the file (even if no changes were made since the last save) it pops up another dialog to ask me if I'm sure I wouldn't rather save the file as a DWG before exiting.
I'm trying to save a gif. but if I save optimized, it makes the colours go weird. I just want to save the original but photoshop isn't giving me that option!
View 8 Replies View RelatedIs there a way to export all frames of an animation at once as a sequence of gif files? (rather than going to file-->save for each frame)
A related question: is there a way to select multiple objects on different frames for easy editing?
I used Graphics & Photos 2013, I update the software yesterday and if I save my job as PDF, the transparency done on a picture is inverted.Currently I removed the transparency but it is not the solution.Issue appear only when I create a PDF file. By creating a JPG file it works.
View 9 Replies View RelatedWhenever I try to open a new blank file in it, it gives me an error message saying I don't have a "default template", and I needed to choose a file and save it as a "default template". So I did, but now, I'm stuck with that template - I can't choose a letter-sized blank page to work on because that choice is no longer on the list under "New". What the heck is going on? I just want a blank page to draw on, and now it's not available.
View 9 Replies View Related