AutoCAD Inventor :: Save Configuration Using Roaming Profile?
Nov 28, 2012
Inventor 2013 on win7 64bit
In our College we use roaming profiles.
If I make changes to configuration while profile is "open" we run into lots of trouble including total dis-functioning of the mold design and OS does not recognize the inventor file extensions and more problems.
A work around solution we found is to completely un install the program from one computer while the profile is "open" so there will be no association between the profile and the local installations on all computers.
However, now I can not save the configuration changes in any of the class computers. ( our OS disk is protected against permanent changes and will reset itself on any restart reboot, unless an administrator does them).
I tried making changes to the configuration both as administrator user and also when giving the local user administrator privileges, but with no successes.
After rebooting, we lose all configurations.
View 4 Replies
ADVERTISEMENT
Sep 22, 2012
I used to know how to save my X5 configuration (screen layout, options settings etc.) by saving some registry entries. I've forgotten how to do that. I'm using 7 (not pro) now, how to do that again?
View 5 Replies
View Related
Aug 10, 2013
I want to save the configuration and state of the Track View in my workspace. So when I start up Max, the Track View opens up in the configuration I had when I last used Max, and/or in my saved workspace.
Even after I save my custom workspace, it doesn't save the track view. I have to manually open up the track view, dock it the way I want, and open up my custom layouts I had saved in the track view. This takes a lot of time.
View 2 Replies
View Related
Mar 28, 2011
When I am working I tend to open 50-100 jpeg images at a time, modify each one of them, and then close out and use the Save All option displayed on close. I am then prompted with the save configuration box for each and every image. Now I have honestly never once changed the quality from 95% before hitting okay. I know the save configuration box does save the quality settings, however I have found that when if I hit enter on the save configuration box too fast I end up with a partially corrupted thumbnail, meaning I have to wait a few seconds before hitting okay so this does not happen.
What would be a very large time saver for me and I'm sure many other users who work with large number of users at the same time would be a little checkbox that says "Do not display the Save Configuration box again for this session". If a user does need the Save Configuration box then they could just ignore this, however for users like me who do not want to change the quality, this would be a large time saver.
View 3 Replies
View Related
Feb 15, 2012
For almost a decade I'm used to AutoCAD standard 3D coordinates display: X to right, Y away and Z straight up. For some reason Inventor is configured differently: X to right, Y straight up and Z toward you.
View 3 Replies
View Related
Nov 19, 2012
I want to ask if in Autodesk Inventor 2013, can we create a part with a different configuration?
example:I made a cube the size of 10mm x 10mm x 10mm, after which it would be revised measures 15mm x 15mm x 15mm. The second revision to change the size of a 12mm x 12mm x 12mm.
Can all the revision is done in one file?And if I want to revise again be 10mm x 10mm x 10mm, can?
Have I been that provides revision always create a new file and the file number so much that hard to figure out which revision. I am still learning Autodesk Inventor 2013.
View 2 Replies
View Related
Jan 6, 2014
I am working on a project in Inventor. Long story short, the file destinations got messed up. I was in the process of getting them all in the same folder so that I could organize them, but now the main project won't open. I'm am not the most Inventor-savvy. how to fix it.
The message that pops up is "Cannot find applets configuration file"
View 3 Replies
View Related
Jun 11, 2013
Every time I want ro start LR5 I have to delete the preference file in C User data Roaming adobe lightroom other wise LR5 just hangs at strt up screen. This is a right royal pain as it means I have to re do my preferences in the program every time I use it ?
View 2 Replies
View Related
Aug 29, 2013
A client was looking to develop a custom interface for documenting iAssemblies.
Would it be possible with iLogic to:
1. Show form.
2. User selects a Browse button to select iAssembly to document.
3. List all iAssembly configurations in the form.
4. User picks configuration.
5. Select OK to create base view, projected view, and Parts List.
This may require API.
View 7 Replies
View Related
Oct 31, 2013
How to use different configuration of parts made with iLogoc in assembly? I want to have equal part with different configuration. I have a problem with the equal files.How to use different configuration of an assembly made with iLogic in assembly?
View 4 Replies
View Related
Mar 7, 2012
I have an assembly that is identical to another assembly with the exception of 2 or 3 components. I want to create 2 different configurations of the assembly, e.g. 12345-009 for the original assy and 12345-019 for the similar assy that has a couple of different components and/or additional components. I can create the -009 assembly and then do a "Save As" for the -019 assy and do a "Component/Replace" and add (or delete) other components.
I want both of these assemblies to be on the same drawing with a base number of 12345. I know I can do this and create a separate parts list (BOM) for each configuration and put it on the drawing. Is there a way to "merge" the two PLs so that there is a quantity column for each configuration (-009 and -019)? For example, if the same gear is used in both assemblies, I want a quantity of 1 in each column. If a component is used in one but not the other, i want only the quantity to show up in the appropriate configuration column.
I am using Inventor 2011.
View 1 Replies
View Related
Aug 4, 2012
I'm creating a drawing for an iassembly, and I can't get the parts list to automatically show a specific configuration's BOM. I've tried filtering, "Ballooned Items Only," and that doesn't change anything. I've tried to create a parts list that looks at the child assembly, and the parts list reverts to the parent iassembly.
In the Browser, there's a lightening bolt next to each parts list in the tree. There are three parts lists/configurations.
The parts list lists parts that aren't in the assembly shown, and/or shows wrong quantities. I can manually update the bom, but I would much rather not. Is there a macro or add in that may be useful? I'll be making many prints from iassemblies, and this would be very useful.
View 2 Replies
View Related
Nov 13, 2012
Where is the configuration for the Default Template Measurement units stored? Have tried creating an application options file, but on the clients this setting is not read/stored (still set to inches after import).
Is this setting stored in the registry? Where?
...and why does Inventor default to a non metric measurement unit?
View 6 Replies
View Related
May 10, 2012
Here in my office we have several pc's running Inventor 2012 and we found out that when a network license is unavailable (the number of licenses is exceeded) then Inventor loses some of its configurations on OPTION window. The fields that are erased and put back to default:
- "General" Tab >> "Load VBA on start-up" is set to false;
- "General" Tab >> "Update physical properties on save" is set to false and "Parts and Assemblies" is unchecked;
- "File" Tab >> "Default VBA project" is set back to default;
- "Contet Center" Tab >> "Location of Libraries" is set to default
- Customized buttons on Ribbonbar loses its icons and we have to recreate them everytime it happens.
have a fix and a new implementation for the new versions to come?
View 3 Replies
View Related
Dec 26, 2011
I want to create one Spur Gear in inventor with equations such that i can build more gears from this base model using excel table. For. Eg. I would like to create a gear with 40 No. of teeth of 10DP, and 20°PA, with Pitch Circle Dia, Base CIrcle Dia, Tooth Thickness based on spur gear calculations.
Now i would like to create a series of such spur gears with varying no. of teeth, i.e. 42, 44, 46, 48, 50..etc. Now if i change the No of teeth ,Accordingly the gear should modify its pitch dia, Base circle dia, Tooth Thickness which would be noted in the Equation.
how to create thes equations and use these in creating gear with different no. of teeth.
I have shown below list of gear data for various no. of gear.
View 8 Replies
View Related
Dec 3, 2013
I'm running AutoCAD Civil 3D 2014 on Windows 7 Professional. I just got this new computer and the AutoCAD software was recently installed. As I always do when I get a new version of ACAD, I set up my Profile settings within the 'options' menu and save to my personal Profile, and set that profile as current.
Then I pull up all my typical toolbars, Layer manager, Xref manager and all that good stuff to my workspace and save a new workspace with my name, and set that workspace as current.
Now, with this new version of ACAD, every time I restart the program my settings are all gone. Even though my 'options' Profile is still saved in there, it's not set to current, so I have to do that every time. As well as my workspace, which doesn't appear the same way I set it up and saved it as a new workspace:
The ToolSpace, the command bar and the Xref manager disappears every time.
View 1 Replies
View Related
Aug 7, 2012
I am working with a client who upgraded to 2013 and their profile settings have disappeared. They also are not able to open hatch patterns that have been copied to the default folder, which is added to the support files search path.
I am not a CAD user or expert with the application, but am required to provide IT support for a client that uses the product.
Steps to recover the old profile settings and save the hatch patterns so they are available each time the application is opened?
View 3 Replies
View Related
Dec 31, 2013
I am having a catastrophic error in Inventor 2013.
When I attempt to save a drawing I have completed, I cannot save!
Can't save, save as or any other variation of save.
This is my issue every time I click save.
View 2 Replies
View Related
Jan 29, 2013
How do you go about saving a custom color profile in CS6? Gone is the save button after you have created the custom profile. In my case I want to save a custom Adobe RGB profile with a gamma of 1.0 instead of the usual 2.2. I can create it easy enough in the custom dialog box, but haven't figured out how to save it.
View 2 Replies
View Related
Jul 2, 2013
Why can't I save an icc profile to a template?
View 1 Replies
View Related
May 10, 2012
I am using Photoshop CS6 on a PC running Win7. In the previous version I was able to save a profile in the Lens Correction panel. In this version I can find my camera and my lens but it won't let me save the profile. I only real estate and straight verticals are very important.
View 3 Replies
View Related
Dec 31, 2013
I want to upload a new logo I've created as a Twitter profile image. I can export the logo as a JPG but what image settings should I use when I save it?
View 3 Replies
View Related
Nov 7, 2012
I use an outside service to make prints. How can I save an image in PSE 11 in either TIFF or JPEG format with the color profile for the outside lab's printer?
View 4 Replies
View Related
Apr 16, 2013
I tried following action script code to save PDF file with color profile attached:
var saveOps: PDFSaveOptions = new PDFSaveOptions();
saveOps.colorConversionID = ColorConversion.COLORCONVERSIONTODEST;
saveOps.colorDestinationID = ColorDestination.COLORDESTINATIONWORKINGCMYK;
saveOps.colorProfileID = ColorProfile.INCLUDEDESTPROFILE;
doc.saveAs(pdfFile, saveOps);
But got following errors: error an Illustrator error occurred: 1346458189 ('PARM'). What is the correct way to save PDF file with color profile?
View 1 Replies
View Related
Jul 25, 2011
So we have a new plotter at work, and I am trying to use it with the publish command. However, because all of our old drawings are saved with our old plotter name, choosing the new plotter isn't an option for all of our old dwgs that havent been set up using the new plotter name. Since our dwgs number in the 1000s, going through each one and renaming them would be impracticable.. but having to individually plot each one is pretty impracticable as well..
So I tried to figure out a workaround, by opening up our new template that has the new plotter configuration on it, hoping I would be able to use it to set all the old dwgs that I have open at the time to the new plot setting.. but the printer name comes up as something different when I try to use it for publish, and if I use it, I get an error and nothing prints. I know the settings used in the new template work, I have been able to print it out. So what I'm asking is, is there anyway I can use the new plotter to publish all of our old drawings?
View 2 Replies
View Related
Oct 7, 2013
i tried to print a drawing and it said configuration cannot be used for thefollowing reasons: either driver not found or driver has problem or device cannot be found. however i can print everything else except when i am using autocad?
View 9 Replies
View Related
Jul 28, 2011
I'm using ACA 2011
How do I configure dwg to pdf output to version 5, many customers do not have Reader 7 and have no intention of downloading the newer reader. I see no area in the Plot Configuration Editor??
What’s up with that
View 1 Replies
View Related
Mar 7, 2013
Since we've migrated to Windows 8 64b we have problems wih plotting some layouts. If I select my plotter it automatically goes to none after selecting and sometimes I get the following error message:
Most of the times I can use the plotter in the other layouts / drawings, but sometimes I have to restart AutoCAD or reboot the computer before the plotter works again. In some layouts we keep getting this problem even after reboot. I've tried reinstalling the plotter (with different drivers), tried different computers, purge and recover the drawings but no luck. The Plotter is a HP Designjet 800.
View 1 Replies
View Related
Nov 28, 2012
I need to set the Printer Configuration Search Path and the Plot Style Table Search Path. Currently I am using COM but the issue I have is that I need to run the same application on 2 different machines, one has only Autocad 2010 (xp-32bit), the other has both Autocad 2010 and Autocad 2012(win7-64bit) and I've got some difficulty to have it running.
Can I set those paths without using COM?
View 1 Replies
View Related
Jun 3, 2011
How to set or change the active display configuration with .NET. Currently I am sending this task to the command line. See below:
' This subroutine sets the correct display config with the supplied name Public Sub SetCurrentDisplayConfig(ByVal strDisplayConfig As String)Dim strCommand As String = "" strCommand = "-AECDISPLAYCONFIGSETCURRENT " & strDisplayConfig & vbCr AutoApp. Application. DocumentManager. MdiActiveDocument.SendStringToExecute(strCommand, True, False, False) End Sub
View 2 Replies
View Related
Mar 23, 2012
Whenever I attempt to print, I get the warning message below referring to a printer that I do not have. I presume it's an AutoCAD default setting, but I cannot find any place allowing me to change this default. It eventually prints, since as the warning message says, it then substitutes my Mac's default printer, Is there any way to change the AutoCAD setting.
View 2 Replies
View Related
