I need to set the Printer Configuration Search Path and the Plot Style Table Search Path. Currently I am using COM but the issue I have is that I need to run the same application on 2 different machines, one has only Autocad 2010 (xp-32bit), the other has both Autocad 2010 and Autocad 2012(win7-64bit) and I've got some difficulty to have it running.
Can I set those paths without using COM?
Configuring plotter/printer on newly upgraded laptop using Autocad LT 2007 with Win7. The printers that are re-installed are not available under that program.
View 8 Replies View RelatedI am having an issue with my assembly grabbing an out of date part. I was wondering what the sequence for the search path Inventor goes thru. I assume it first searches the folder you are in but does it go down, up after that? If there is a part below which way does it go? Is there a possibility it could be grabbing the wrong part if it is not in the same folder?
View 5 Replies View RelatedMy computer is not searching for the xrefs correctly. Whenever I switch to another job and try to load an xref, the computer searches under the last job I worked on and nothing else. I have several folders listed as search paths but it just seems to be ignoring them. We never used to have this problem and I cannot figure out what has changed.
View 2 Replies View RelatedIn older versions of ACAD you could set Project File Search Path; I see in my new copy of ACAD LT 2103 there is no longer a Project File Search Path line in the Options/Files tab-is it still possible to set the project file search path?
View 4 Replies View RelatedI've done it before, but cannot for the life of me find how to modify the default Script file search path.
I'd thought it was under the "options" Dialog, along with the other search paths, but cannot find it.
I am trying to insert a block (using .Net) that does not already exist on the drawing. It is on a network share, which is in the search path. If I, from the command line insert the block, it finds it ok and inserts it. But when I do this from .Net code it does not search for the block. So how do you get it to search for the block and insert it?
Here is a code snippet I'm using to insert the block:
Dim myDwg AsDocument = Application.DocumentManager.MdiActiveDocument
Using myDocLock AsDocumentLock= myDwg.LockDocument()
Using myTrans AsTransaction= myDwg.TransactionManager.StartTransaction
'Open the database for WriteDim myBT AsBlockTable = CType(myDwg.Database.BlockTableId.GetObject(OpenMode.ForRead), BlockTable)
[Code]....
I loaded custom menus to 2012 lt drop down menus showed but i get a message about the search path.
View 9 Replies View RelatedI'm trying to get the file name of a file outside the search path. Obviously (findfile) is not an option. The file location changes with each project so adding a search path is also not an option. I can get the path to the file but i can't seem to figure out how to get the file name. I can also get the first set of characters, as they are constant from project to project, it's just the end of the file name that changes. The file is always a PDF.
View 9 Replies View RelatedI have been changing setting in the Options dialog box for many years but have never made any changes directly to the "Working Support File Search Path" because these update automatically to reflect changes i make in the "Support File Search Path."
What is the purpose of these "Working" settings?
When I migrated to 2012 form 2011, it only migrated a partial list of the support file search locations. So, I reset the ones that were missing and exported out my profile.
Next I saved my workspace to my name and checked the box to "automatically save workspace".
I shut my computer down for the night. When I restarted my computer, then AutoCAD 2012 the missing support paths are missing again. I am not the only one in the CAD department that is having this issue. It is so annoying to have to reset my profile every time I shut my computer down.
I'm using a Lisp which searches a certain folder and then updates all blocks, which are nested in that folder.
My issue is, that I'd like to use more than one folder on different path, where the LISP can search for this files. Is there a way to use multiple search path?
The code I'm using now to search for the blocks is: (setq dir "I:\AutoCAD Blöcke\Template\Support")
For some reason I am not able to modify the values for the paths. I am using ACA2011.
View 3 Replies View RelatedSome of our 64-bit users lose their custom Support File Search Paths.
After reading about it, I saw that I could add them back in by putting
(setenv "ACAD" "S:\Fonts;S:\Acad2007\Hatch_Patterns;S:\Acad2007\Lisp;S:\Acad2007\Simpson\Menu;”)
at the end of acad2013.lsp.
1. However, I get malformed string on input error in AutoCAD.
2. My other question is do I need to list only the custom paths or all of the built-in paths as well?
We have a person in the office that would like to create their own .ctb file that we would like to have them to access but they will also need to access our .ctb files (Standard). We currently restrict access to the .ctb files as they can be alterered leading to problems for everyone printing. Is there a way to create another path so they we can have a locked folder of .ctb files and an unlocked folder for .ctb files.
View 2 Replies View RelatedDo a quick print screen of support file search path? Our computer's are set up by an outside source and I believe they did not migrate anything correctly or did something incorrectly. My issue specifically is anything to do with rendering and materials displaying is not working. I just want to make sure ACAD 2013 is looking at all the standard file locations along with our customization files. This is happening on 2 computers that have 2013 installed, all the rest are still using 2012 and this works fine. I tried exporting that profile, but still nothing works for rendering.
View 2 Replies View RelatedI add 3 folder locations to the Support File Search Path. At random, all 3 of these locations disappear. I haven't tracked when this happens and what maybe happened previously, but I know I'm not the only one within my office that this has happened to. The paths are on a file server for our blocks.
Not sure how relevant this is, but I have a HP Z420 Workstation, W7-64-bit, Autodesk Building Design Suite Ultimate, using AutoCAD MEP 2013.
I used this snip it to add the path for network tool palettes. It works but it keeps adding the same search path every time i open a new session of AutoCAD. The list keeps getting longer with the same information. Say you want to make sure your users all have a certain tool palette.
(setq tooldir "z:\1111\2222\test]" toolpaths (vlax-get-property (vlax-get-property (vlax-get-property (vlax-get-acad-object) 'Preferences) 'Files) 'ToolPalettePath))(if (not (vl-string-search tooldir toolpaths)) (vlax-put-property (vlax-get-property (vlax-get-property (vlax-get-acad-object) 'Preferences) 'Files) 'ToolPalettePath (strcat (vl-string-right-trim ";" toolpaths) ";" tooldir) ))(setq tooldir nil toolpaths nil)
I have many pictures (about 10'000). Now i need a search (smart search) with pictures where only my mother (is marked)
On all my pictures each person is tagged. For my mother the Person Tag is called "mother"
I created a saved search with the criteria Person include "mother". The problem now is that also pictures are shown with my mother and other persons. But i would like only pictures from my mother without other persons. Something like... "Person is mother and not person "sister" and not person "friends" etc.
I'm using Lightroom 5.2RC. Not sure if this started happening with the 5.2RC version or if it's been an issue for a while.
While in Library mode, when I choose a library search filter preset, say all 5 stars, and then toggle the filter off and on again, the search criteria randomizes to something wildly different than what I was just searching for, for example, adding text and metadata to the search queries when I only had star attributes selected a few seconds before.
I've experimented with turning the filter lock icon on and off and that seems to have no effect. Switching between folders in my catalog and toggling search off and on, results in the same random search criteria being generated.
Lightroom 4.2 – the situation is this, I have a number of pictures of group shots with many people. I tag each person in each photo. I show my photos to these people and they would like a print of photos with them in it. I am an amature photographer currently located in India where most people have no cameras, so I normally oblige if someone wants my of them pictures printed. On one such occasion I took a week long trip with some friends.After showing them the pictures I tagged “Print for Raju”, “Print for Priya”, “Print for Varun”. The problem arises now when I try to search keywords in the “contains all” section, “print for varun” doesn’t do an exact search. Rather if Raju wanted a picture of Varun printed, that picture would have the tag “Varun” and “print for Raju” and which would make the photo included in my search “print for varun” even if varun doesn’t want the picture.
Is there a way to search EXACTLY what I type? If my picture has 15 tags, “contains all” will search all those tags and if it can piece together the three words I am searching for out of all of the tags, it will reveal results inconsistent with my desires.I realize now that I could use collections instead of tags for compiling pictures to print for people.
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies View Relatedhow to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies View RelatedSo we have a new plotter at work, and I am trying to use it with the publish command. However, because all of our old drawings are saved with our old plotter name, choosing the new plotter isn't an option for all of our old dwgs that havent been set up using the new plotter name. Since our dwgs number in the 1000s, going through each one and renaming them would be impracticable.. but having to individually plot each one is pretty impracticable as well..
So I tried to figure out a workaround, by opening up our new template that has the new plotter configuration on it, hoping I would be able to use it to set all the old dwgs that I have open at the time to the new plot setting.. but the printer name comes up as something different when I try to use it for publish, and if I use it, I get an error and nothing prints. I know the settings used in the new template work, I have been able to print it out. So what I'm asking is, is there anyway I can use the new plotter to publish all of our old drawings?
i tried to print a drawing and it said configuration cannot be used for thefollowing reasons: either driver not found or driver has problem or device cannot be found. however i can print everything else except when i am using autocad?
View 9 Replies View RelatedFor almost a decade I'm used to AutoCAD standard 3D coordinates display: X to right, Y away and Z straight up. For some reason Inventor is configured differently: X to right, Y straight up and Z toward you.
View 3 Replies View RelatedI'm using ACA 2011
How do I configure dwg to pdf output to version 5, many customers do not have Reader 7 and have no intention of downloading the newer reader. I see no area in the Plot Configuration Editor??
What’s up with that
Since we've migrated to Windows 8 64b we have problems wih plotting some layouts. If I select my plotter it automatically goes to none after selecting and sometimes I get the following error message:
Most of the times I can use the plotter in the other layouts / drawings, but sometimes I have to restart AutoCAD or reboot the computer before the plotter works again. In some layouts we keep getting this problem even after reboot. I've tried reinstalling the plotter (with different drivers), tried different computers, purge and recover the drawings but no luck. The Plotter is a HP Designjet 800.
How to set or change the active display configuration with .NET. Currently I am sending this task to the command line. See below:
' This subroutine sets the correct display config with the supplied name Public Sub SetCurrentDisplayConfig(ByVal strDisplayConfig As String)Dim strCommand As String = "" strCommand = "-AECDISPLAYCONFIGSETCURRENT " & strDisplayConfig & vbCr AutoApp. Application. DocumentManager. MdiActiveDocument.SendStringToExecute(strCommand, True, False, False) End Sub
Whenever I attempt to print, I get the warning message below referring to a printer that I do not have. I presume it's an AutoCAD default setting, but I cannot find any place allowing me to change this default. It eventually prints, since as the warning message says, it then substitutes my Mac's default printer, Is there any way to change the AutoCAD setting.
View 2 Replies View RelatedI have a project of a residential building, made in ADT2011. The building has 17 levels. Levels from 2nd to 17th are identical. They created as an element linked to constructs. The other levels created as constructs.
I also have different view files for elevations, sections and perspectives.
The problem is that I can not control display configuration of objects in view files. The thing that I need is to turn off balconies' glasses in curtain walls of the elevation view files (To see what is behind the glass in 2d elevations). Now to achieve it, I have to turn off glasses in the original element file. But in that case the glass disappears also in plans, sections and perspective views, where I need it.
The question is: Can I control the visibility of the default infills for curtain walls independently for different view files?