I've done it before, but cannot for the life of me find how to modify the default Script file search path.
I'd thought it was under the "options" Dialog, along with the other search paths, but cannot find it.
When I migrated to 2012 form 2011, it only migrated a partial list of the support file search locations. So, I reset the ones that were missing and exported out my profile.
Next I saved my workspace to my name and checked the box to "automatically save workspace".
I shut my computer down for the night. When I restarted my computer, then AutoCAD 2012 the missing support paths are missing again. I am not the only one in the CAD department that is having this issue. It is so annoying to have to reset my profile every time I shut my computer down.
My computer is not searching for the xrefs correctly. Whenever I switch to another job and try to load an xref, the computer searches under the last job I worked on and nothing else. I have several folders listed as search paths but it just seems to be ignoring them. We never used to have this problem and I cannot figure out what has changed.
View 2 Replies View RelatedWe have a person in the office that would like to create their own .ctb file that we would like to have them to access but they will also need to access our .ctb files (Standard). We currently restrict access to the .ctb files as they can be alterered leading to problems for everyone printing. Is there a way to create another path so they we can have a locked folder of .ctb files and an unlocked folder for .ctb files.
View 2 Replies View RelatedIn older versions of ACAD you could set Project File Search Path; I see in my new copy of ACAD LT 2103 there is no longer a Project File Search Path line in the Options/Files tab-is it still possible to set the project file search path?
View 4 Replies View RelatedI have been changing setting in the Options dialog box for many years but have never made any changes directly to the "Working Support File Search Path" because these update automatically to reflect changes i make in the "Support File Search Path."
What is the purpose of these "Working" settings?
For some reason I am not able to modify the values for the paths. I am using ACA2011.
View 3 Replies View RelatedSome of our 64-bit users lose their custom Support File Search Paths.
After reading about it, I saw that I could add them back in by putting
(setenv "ACAD" "S:\Fonts;S:\Acad2007\Hatch_Patterns;S:\Acad2007\Lisp;S:\Acad2007\Simpson\Menu;”)
at the end of acad2013.lsp.
1. However, I get malformed string on input error in AutoCAD.
2. My other question is do I need to list only the custom paths or all of the built-in paths as well?
Do a quick print screen of support file search path? Our computer's are set up by an outside source and I believe they did not migrate anything correctly or did something incorrectly. My issue specifically is anything to do with rendering and materials displaying is not working. I just want to make sure ACAD 2013 is looking at all the standard file locations along with our customization files. This is happening on 2 computers that have 2013 installed, all the rest are still using 2012 and this works fine. I tried exporting that profile, but still nothing works for rendering.
View 2 Replies View RelatedI add 3 folder locations to the Support File Search Path. At random, all 3 of these locations disappear. I haven't tracked when this happens and what maybe happened previously, but I know I'm not the only one within my office that this has happened to. The paths are on a file server for our blocks.
Not sure how relevant this is, but I have a HP Z420 Workstation, W7-64-bit, Autodesk Building Design Suite Ultimate, using AutoCAD MEP 2013.
When I search an autoCAD file from windows 7, it only shows me the backup file and missed the DWG file. I’m using Window 7 professional, service pack 1, 64-bit operating system; AutoCAD2012. Are there any way to change the seetings so I can see the DWG file?
View 9 Replies View RelatedWhen you start autocad for the first time, it creates a profile with the default support file search paths. Where does AutoCAD get this from?
I want to use this for a tool I am creating.
I need to set the Printer Configuration Search Path and the Plot Style Table Search Path. Currently I am using COM but the issue I have is that I need to run the same application on 2 different machines, one has only Autocad 2010 (xp-32bit), the other has both Autocad 2010 and Autocad 2012(win7-64bit) and I've got some difficulty to have it running.
Can I set those paths without using COM?
I am having an issue with my assembly grabbing an out of date part. I was wondering what the sequence for the search path Inventor goes thru. I assume it first searches the folder you are in but does it go down, up after that? If there is a part below which way does it go? Is there a possibility it could be grabbing the wrong part if it is not in the same folder?
View 5 Replies View RelatedI am trying to insert a block (using .Net) that does not already exist on the drawing. It is on a network share, which is in the search path. If I, from the command line insert the block, it finds it ok and inserts it. But when I do this from .Net code it does not search for the block. So how do you get it to search for the block and insert it?
Here is a code snippet I'm using to insert the block:
Dim myDwg AsDocument = Application.DocumentManager.MdiActiveDocument
Using myDocLock AsDocumentLock= myDwg.LockDocument()
Using myTrans AsTransaction= myDwg.TransactionManager.StartTransaction
'Open the database for WriteDim myBT AsBlockTable = CType(myDwg.Database.BlockTableId.GetObject(OpenMode.ForRead), BlockTable)
[Code]....
I loaded custom menus to 2012 lt drop down menus showed but i get a message about the search path.
View 9 Replies View RelatedI'm trying to get the file name of a file outside the search path. Obviously (findfile) is not an option. The file location changes with each project so adding a search path is also not an option. I can get the path to the file but i can't seem to figure out how to get the file name. I can also get the first set of characters, as they are constant from project to project, it's just the end of the file name that changes. The file is always a PDF.
View 9 Replies View RelatedI'm using a Lisp which searches a certain folder and then updates all blocks, which are nested in that folder.
My issue is, that I'd like to use more than one folder on different path, where the LISP can search for this files. Is there a way to use multiple search path?
The code I'm using now to search for the blocks is: (setq dir "I:\AutoCAD Blöcke\Template\Support")
I'm using ObjectARX in .net.
Is there a way to retrieve the pcg file path from a given PointCloud?
I used this snip it to add the path for network tool palettes. It works but it keeps adding the same search path every time i open a new session of AutoCAD. The list keeps getting longer with the same information. Say you want to make sure your users all have a certain tool palette.
(setq tooldir "z:\1111\2222\test]" toolpaths (vlax-get-property (vlax-get-property (vlax-get-property (vlax-get-acad-object) 'Preferences) 'Files) 'ToolPalettePath))(if (not (vl-string-search tooldir toolpaths)) (vlax-put-property (vlax-get-property (vlax-get-property (vlax-get-acad-object) 'Preferences) 'Files) 'ToolPalettePath (strcat (vl-string-right-trim ";" toolpaths) ";" tooldir) ))(setq tooldir nil toolpaths nil)
I started to develop autocad's application with .Net framework.
But i have some trouble, particularly when i try to find a block by name (not like id).
I would take a block by name, instead to get all block and find one with comparison.
How can resolve this problem?
I've got problems using Acad 2012, i'm sure it isn't a hardware problem since the specs are HIGH
First Problem is, when mouse over an icon/box/whatever you call it (eg. Line tool, Circle tool, etc), it only displays the text, but it doesn't show a blue highlight like it's supposed to do, and when i select it, the Blue highlight does not transfer to it, it remains on the Line tool
Second, The Search box isn't working
Third, when i switch from Drafting & Annotation to something else or vice versa, the tabs remain the same, and is usually accompanied by some annoying lags.
I have many drawings that were created with the xref's as full path and I need them to be relative path. I would just go in and reatch them as relative path but the drawings are complete and there are different layers frozen in each one.
View 4 Replies View RelatedI have found a way to convert FULL to RELATIVE using XRP2004.lsp but not the other way round. Main reason I want to do this is to change the Relative to Full, move the drawing and then revert them back to Relative.
View 3 Replies View Relatedthis layer appears to be limited to the layer palette. many of us will start typing for the layer when searching instead of scrolling. now in the layer pull down in the ribbon this works as expected start typing the layer name (2-3 letters) and it locates the layer. if this is done using the palette it will only search to the first letter. if i use the classiclayer dialog it works the same as the drop down from the ribbon.
Win 7 pro 12gb
NVIDIA Quadro 2000
LDD 2009
IDS 2014
I have been given a set of drawings (300+) and I need to find where and/or if certain blocks (and other objects) are used in these drawings. Is there a utility program or does AutoCAD have the ability to search a group of drawings for a block (by name) and return a list of all the drawings where the block is found.
On that same topic, is there a utility program that will export all the CAD data from a list of drawings to a .csv file or even excel so I can filter and search several drawings for layers, blocks, xrefs etc.
We are running Autocad 2012 (64 bit) on Windows 7. how to get Windows Explorer to search for text inside of DWG files?
View 9 Replies View RelatedI am brand new to Inventor and I am being given the seemingly simple task of finding the tooling files that needs to be checked for correction on account of parts manufactured out of tolerance. The plotted drawings I'm given has text on in that can find the files, but the drawings are huge. Is there a way to find text like I've been doing when given the similar task in Autocad? I see no edit menu in Inventor.
View 9 Replies View Related"Find" command gives me a dialogue box. Then everything falls apart.(program stops). Have not found any samples except VBA and lisp files. I want to use only "script" files.
View 0 Replies View RelatedI have many pictures (about 10'000). Now i need a search (smart search) with pictures where only my mother (is marked)
On all my pictures each person is tagged. For my mother the Person Tag is called "mother"
I created a saved search with the criteria Person include "mother". The problem now is that also pictures are shown with my mother and other persons. But i would like only pictures from my mother without other persons. Something like... "Person is mother and not person "sister" and not person "friends" etc.
I'm using Lightroom 5.2RC. Not sure if this started happening with the 5.2RC version or if it's been an issue for a while.
While in Library mode, when I choose a library search filter preset, say all 5 stars, and then toggle the filter off and on again, the search criteria randomizes to something wildly different than what I was just searching for, for example, adding text and metadata to the search queries when I only had star attributes selected a few seconds before.
I've experimented with turning the filter lock icon on and off and that seems to have no effect. Switching between folders in my catalog and toggling search off and on, results in the same random search criteria being generated.
