I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies
I had list of computers in a work-group network with printers attached to computers. I had shared HP Deskjet 1280 on a xp, then on windows 7 try to connect to it and it successful connected and I can print any document.But I get the attacehd error when I try to select the printer when trying to print an AutoCad file.
View 4 Replies View RelatedMy old Xerox PS printer gave up the ghost, so I'm looking for a new Black and White Postscript Laser Printer.
One factor that is important to me is replacement cartridge cost.
I'm thinking HP for brand but am open to others.
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies View Relatedevery time I use my Dell Printer and go into scanning and select 'scan to' and select Gimp as the image program. Gimp freezes for eternity on Gimp Startup and I HAVE to 'end process'!!! end task DOES NOT work!! how do I fix this while scanning directly into Gimp?
View 2 Replies View RelatedOSx Maveriks + iMac27" late 2011 16Bg DDR
I have some trouble with some files and print/printer. This is the message I get.
This issue happens only with some files link this : LINK
With some others I have no problem at all.
Have restored PS preferences (hold down cmd+alt+shift while starting PS CC) , try to change default printer, try to uinstall ad reinstall PS CC with no success.
I get this error message upon startup:There was an error opening your printer. Printing functions will not be available until you have selected a printer and reopened any documents. I can however print pictures with window's photo printing wizard so I know my printer is setup and selected. Can anyone tell me what I need to do in order to have photoshop CS4 recognize that my printer exists and is selected?
View 1 Replies View RelatedI want to print an A3 drawing on an A4 printer. I saved the drawing as .DWF and opened the "Autodesk Design Review 2012" to perform the "tiling" print. When in printing properties, I can't seam to understand why the drawing is split in 6 pages, when in reality one A3 sheet is 2x A4 sheets. You can see in the example, that so much space is wasted, is there a way to center the drawing, and am I doing everything right here?
View 4 Replies View RelatedI´m using Inventor Professional 2013 64-bit build 138.No matter what I get 1 pixel wide lines on screen and on printer.
I can control line colour and line type (as in solid, dashed, dotted etc) from Manage - Styles editor - Layers.
When I make changes to the "Visible" layer:
- the line colour changes come through both to screen and printer
- the line type only comes through to the screen, but not to the printer
- the line weight is ignored both by screen and printer
Tools - Application Options - Drawing - Display line weights
seems to have no effect at all.how to get drawing line weights to come through to the printer
I am having problems printing to drawing sizes other then A Size (Letter).
I have scanned through the messages in this Newsgroup and tried everything that I have found, including making sure that I set the properties in a specific order.
No matter what size I specify, the printer spits out the drawing on an A Size piece of paper.
Here is my
Private objApprenticeServerApp As New ApprenticeServerComponent
Private Sub PlotInventorDrawing(strDwgPath As String, strPlotSize As
String, strPlotter As String)
' Open a document.
Dim odoc As ApprenticeServerDocument
[Code] .......
I have an electrical drawing of a system, but the drawings are all on one page, and in order to print i have to go to print and then highlight want i want to print individually, is it possible to print all in one shot . (please see the attached file)
View 9 Replies View RelatedIs there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies View RelatedI have windows 7 and 2006 LT but my printer does not appear in the printer list in autocad.
View 3 Replies View RelatedI need to save files as AO 1:25 pdfs to send to clients for printing. I have it all set up but as I have no plotter it wont let me save / export it!
On other threads it suggested selecting plotter "none " but that is not an option given to me , it only comes up with the home printers I have used ( they only doA4)
the procedure for adding a new printer to my Autocad 2000, or 2007.
View 5 Replies View RelatedI've tried setting "Options" > "Plot and Publish" > "Use as default output device" to both "Default Windows System Printer" as well as "HP Officejet.I've double checked that my printer is in fact set as the default windows system printer.Nonetheless, every single time I print, "Printer/plotter" is set to "None" and I have to select my printer manually.
View 5 Replies View RelatedI have done a drawing, and when I try to plot..The printer dialog doesn´t accept any of my installed printers.I have, for example an HP p1102, and when I select it as the printer device, de combo box closes and the selection is automatically changed to "none".
I have searched this issue in the Group, but I haven't seen any post talking about it.
i have autocad lt and I am unable to print. When I try to print my printer doesn't appear in the drop down box where the available printers are listed. the printer isn't hidden I already went to that box and it wasn't checked.
View 2 Replies View RelatedWe have a number of printers in our office, an A3, an A1 plotter and an A4 printer.
After printing off the same drawing to the A3 and the A4 yesterday, I realised the A4 printer is printing around 95% of the size it should be printing.
I don't even know where to start fixing this problem; the user manual for the HP Officejet Pro 8000 Enterprise [I know!] doesn't even reference scale at all. It could be an issue with CAD linking to the printer my computer linking to the printer the printer My colleagues are having the same issue, so it's not just my computer or settings.
My drawing office is in need of a Plotter.
Would a Hp printer be sufficient,or is a Plotter more suited to the task.
What are the differences between a Plotter and Printer?
I have a problem with plotting dwg files using vb net.
When in this files is stored a printer no more existing in my network I've an exception in my vb net program.
How can I clean any information about printers stored in files?
To plot these files I use "acadDoc.SendCommand("-stampa" + vbCr + "S" + vbCr + "model" _ ....."
Now if only I could make my electrical schematic drawings in Inventor and not have to use Autocad Electrical. When will this be possible?
View 1 Replies View RelatedI need to set the Printer Configuration Search Path and the Plot Style Table Search Path. Currently I am using COM but the issue I have is that I need to run the same application on 2 different machines, one has only Autocad 2010 (xp-32bit), the other has both Autocad 2010 and Autocad 2012(win7-64bit) and I've got some difficulty to have it running.
Can I set those paths without using COM?
When trying to create a PDF file of any drawing with the inbuilt DWG to PDF AutoDesk plotter the software always crashes out with a FATL ERROR: Unhandled Access Violation Reading 0x0000 Exception at 21247a28h. Not sure if this is a coincidence but this has only just started happening since updating my Adobe Reader software to the very latest XI version just released.
I have sent several error reports to Autodesk but can't see any in the support section. I have tried un-installing the Acrobat Reader software and AutoCAD still crashes out. Creating PDF's from external printers like PDF24 have no issues but prefer the inbuilt printer as it keeps the vector data and layering info in the resultant PDF.
Using AutoCAD LT 2013 with service pack 1.1 installed.
In our drawings we have a layout with a view port and tittle block.
Default printer set for that layout is "dwg to pdf.pc3" and paper is "ISO A3".
I had to plot this layout [extence] to a plt file for the use of our Production ERP.
We had to print to a specific windows printer with paper size A3.
We use to do it in VBA with the bellow code. How to do it in .Net
Public Function BetsyPlot2() As Boolean
Dim Plot As AcadPlot
Dim alayout As AcadLayout
Dim lowerLeft(0 To 1) As Double
Dim upperRight(0 To 1) As Double
Dim retval As Boolean
retval = flase
[Code]..
I'm having problems with lineweights. It shows up too dark whenever I plot to both pdf and the printer (Kyocera KM-2560 KX). Ive tried adjusting the ctb file (changing thicknesses of colours) but to no avail. This problem does not occur for my colleagues, with exactly the same ctb file. So is it a general autocad setting problem?
View 2 Replies View RelatedWe have a drawing with 100 tabs,
How can we change the printer on all tabs at one time. Example: All tabs are now for printer 78 but we need them to print on printer 77.
This was working in 2010 but does not work in 2014.
routing attached.
I know this isnt really a CAD question but I bought a hp designjet 510 about 6 months ago. It was working great and cutting everything. Then I had a paper jamb and ever since then it doesn't cut every time. Sometimes it cuts four pages in row and then sometimes it will group 2 together.
View 5 Replies View RelatedWhen I plot directly to a plotter or to a PDF file from paper space, some of the 3d pipe model will fade out along the pipe line. It happens to some of the lines, not all. I have re-drawn the pipes and drawn them using different UCS orientations. No change. I changed the layer color, changed the tessellation, line weight. Can this problem be related to the display driver, either software or video card? I have the latest drivers. ACAD ver. 11, nvidia quatro fx-3800 card.
View 1 Replies View RelatedI have some very strange problems printing from Autocad. Some of the text is missing. The printer used is a HP9500. If I use a PDF driver to print to file, then print from the PDF file, it's ok, the text is showed, but printing directly from autocad has been resulting in this type of issue.
I checked the layers, and they are ok. The fonts are ok. It's not printing some text "near the viewport" borders. It was what I could conclude.
My printer/plotter selections are missing.
I used to be able to select 2 separate printers and a PDF'ing option but all of a sudden they are missing?
The printers are connected via a network, are visible and usable in Windows and I can print to them from other software packages (word, outlook, etc).
I was away for a week and when I came back they were missing from Autocad (2011LT version 3).
The machine is a dell Precision T5500, Intel Xeon E5507, 4 GB RAM
Windows 7 64 bit SP 1
