AutoCAD Inventor :: 2013 - Drawing Screen And Printer Line Weight
Feb 23, 2013
I´m using Inventor Professional 2013 64-bit build 138.No matter what I get 1 pixel wide lines on screen and on printer.
I can control line colour and line type (as in solid, dashed, dotted etc) from Manage - Styles editor - Layers.
When I make changes to the "Visible" layer:
- the line colour changes come through both to screen and printer
- the line type only comes through to the screen, but not to the printer
- the line weight is ignored both by screen and printer
Tools - Application Options - Drawing - Display line weights
seems to have no effect at all.how to get drawing line weights to come through to the printer
View 5 Replies
ADVERTISEMENT
Apr 26, 2013
When i convert to Pdf the line weight is very board on the pdf, I have never had this before.
View 3 Replies
View Related
Oct 22, 2012
In a sketch block how do you change the line weight..i tried through Block Editor but cannot change...lineweight is currently 0.25mm but i want to change to .70mm..
View 2 Replies
View Related
Oct 21, 2012
I have a block in which the line weight is 0.20mm...how do i change the block lines weight to 0.50mm & 0.75mm.
View 1 Replies
View Related
Oct 11, 2012
Is there a larger line weight then the 2.11mm or is this the largest
View 3 Replies
View Related
Oct 28, 2011
I am unable to plot lineweight in Mtext while printing the drawing. I have checked the 'Scale Line weight' in Page Setup Manager but the Mtext is not get weighted while other entities gets lineweight when printed with the same options.
View 4 Replies
View Related
Jun 3, 2013
I'm here with 2013 SP2 64 bit Build 200 and two screens. Left screen is graphics area, Browser is on the left of right screen. Graphics is ATI Fire Pro V7800 with driver 9.3.3.3000.
In video (zipped MP4) you see a cutout of both screens, think of screens changing at the left of the browser.
Now, in many cases, after doing an operation, the browser is jumping back to the middle of my graphics in the left screen.
View 4 Replies
View Related
Feb 14, 2012
When dimensioning views on idw my line weights disappear on the view I am dimensioning. The Display Line Weights check box stays checked during this.
The only way to get them to display correctly is to select a line in the view and right click select properties and hit OK.
System:
Inventor 2012 Professional SP1
Dell Precision 3500 Intel Xeon W3565 @ 3.20 GHz
12 GB Triple-Channel Memory
AMD/ATI FirePro V7900 2 GB video card
View 6 Replies
View Related
Nov 16, 2013
I am trying to change the line weight on an ipt file saving to a jpg format.
I am creating operations manuals and line weight and pixalation is unacceptable.
View 4 Replies
View Related
Mar 20, 2012
We have the weight inour title block tied to the mass property.It is set to populate automatically and it does very nicely.
The issue comes when I have an assembly and in the BOM I set certain components to be reference. When I go to Iproperties and then under the Physical tab select update,
the value updates there, but not in the associated drawing title block.
View 6 Replies
View Related
Mar 26, 2013
I want to changed the default visible line weight for all drawings. I just can't get it to work. I have changed my project file settings to "Read-Write", I have tried this in both the Default Standard and my own standard. I changed the "Visible (ANSI)" Line Weight, saved it, then hit "Save" on the Styles and Standards bar. It works for a document. But when I open a new document, the line weight has reverted back to the old value.
View 4 Replies
View Related
Aug 31, 2012
What controls the line weight of the break lines in the detail views? Have tried everything, but still have them shown very thick.
View 2 Replies
View Related
Nov 18, 2011
What line weight changes the thickness of the border around a Detail View in 2012?
Inventor 2013
Windows 7 Professional 64-bit SP1
HP EliteBook 8470w
Processor: Intel(R) Core(TM) i7-3610QM CPU @ 2.30GHz
Memory: 16 GB
AMD FirePro M2000
3D Connexion SpacePilot
View 2 Replies
View Related
Nov 27, 2013
Using Inventor 2013 SP1
A user just point out to me that when making a coil with 12 revolution is OK but 13 is really wrong.
tube Ø54x2 mm
Øcoil = 800 mm
pitch = 55 mm
Is there a patch for that?
View 5 Replies
View Related
Feb 8, 2012
The weight of the parts is correct but if the quantity is greater than 1 in a weldment the BOM collumm does not do the math and multiply the quantity X the weight. If it is a formula what is the syntax?
View 1 Replies
View Related
May 2, 2013
I'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies
View Related
Jul 13, 2012
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference. Is there a command to prevent the floating option?
View 9 Replies
View Related
Mar 8, 2012
How to change the Color, line type and Line weight for the Line using .Net.
View 9 Replies
View Related
Jul 6, 2013
I seem to be having trouble changing the lineweight of my profile line. I have changed the line weight in the layer properties, in the Profile properties and tried changed the line weight in the pen style. Everywhere I could think I try to make the line thicker but when I plot, the line is still the same and difficult to distinguish from the grid blocks of the profile view.
View 3 Replies
View Related
Jul 13, 2012
My command line is partially off the screen as shown in the attachments below. It started doing this after a reboot this morning. I can't drag it, select it, or find a way to move it in any way. I tried changing the resolution of my monitor thinking it might "bump" it back on the screen. I'm probably missing something easy but I can't seem to make any difference.
View 4 Replies
View Related
Aug 4, 2012
Is there anyway of plotting a cad drawing from the model view screen so that certain linescales show? At the moment when I plot it will show hatched items without the outlines.
View 9 Replies
View Related
Dec 10, 2013
I have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
View 9 Replies
View Related
Nov 4, 2012
Is there a button/option which enables the drawing to fill the screen
View 3 Replies
View Related
Apr 30, 2012
if the command line is docked and you hit F2 to bring up the text screen,
there is no word wrap.
e.g.
type (entget (car (entsel))) pick an object, and then F2 for text screen.
The result is all on one line and you can only view it by scrolling sideways.
The same happens when you list a few lines of Mtext.
If the command line is not docked there is no problem.
View 9 Replies
View Related
May 20, 2005
I am having problems printing to drawing sizes other then A Size (Letter).
I have scanned through the messages in this Newsgroup and tried everything that I have found, including making sure that I set the properties in a specific order.
No matter what size I specify, the printer spits out the drawing on an A Size piece of paper.
Here is my
Private objApprenticeServerApp As New ApprenticeServerComponent
Private Sub PlotInventorDrawing(strDwgPath As String, strPlotSize As
String, strPlotter As String)
' Open a document.
Dim odoc As ApprenticeServerDocument
[Code] .......
View 3 Replies
View Related
May 13, 2012
How do I get the screen to refresh properly when drawing a line larger than the art board when the screen scrolls? Everything turns white in CS6, CS5 and CS4.
View 12 Replies
View Related
May 25, 2012
I've seen umpteen explanations of how to change lineweights in Revit.None of them address this simple thing I'm trying to do.
I just want to:
1. Create a few lilnestyles that appear along side the other line styles - for instance:
Thin Line, Medium Line, Thick Line, <<Really Thick Line, >> <<Absurdly Thick Line,>> etc, etc..
2. Draw a line
3. Click on the line
4. Select from a drop down list, "Absurdly Thick Line" and have it instantly inherit the linestyle I created.
The only way I can do this is to create a family, make a new subcategory of Detail Items, create the characteristics I want in the line, export it as a .dwg file, then import it into Revit - and then I see the new line style along side the other line styles, and I can then select any line and make it the new line style.
Certainly, there is an easy to find, simple, straightforward way to add line styles to the existing group - and have those new line styles become immediately accessible from the "Modify Lines" Linestyle Drop down Menu.
View 1 Replies
View Related
Oct 8, 2012
Why is that box appear whenever i draw a line? Does it gona affect the printing? how can i make it disappear?
View 3 Replies
View Related
Nov 24, 2013
when i export my drawings to pdf and then print them them i am not seeings any line weight .
View 0 Replies
View Related
Oct 26, 2012
Why is it when I increase the lineweight, on the current layer, to a thicker lineweight from the default .25mm, it remains the same thickness/weight? I can change everything else, style, color, but not the weight. I need it to be a thick line, instead of the normal thin line.
View 3 Replies
View Related
Apr 24, 2012
I have been giving a drawing that I am unable to print dark enough with out my layers in some areas becoming way to thick and I was wondering if it is at all possible to select the whole drawing and just reset the line weights to a default setting with out having to go layer by layer.
View 2 Replies
View Related
