I have done a drawing, and when I try to plot..The printer dialog doesn´t accept any of my installed printers.I have, for example an HP p1102, and when I select it as the printer device, de combo box closes and the selection is automatically changed to "none".
I have searched this issue in the Group, but I haven't seen any post talking about it.
Get the message that I have to select the printer when I try to print. Then open a new photo and print it. Where do I choose a printer?
View 3 Replies View RelatedIs there any way to prevent the DWG > PDF printer driver from exporting out the layers in the drawing. I want to issue PDF's to different people but I don't want them to accidently freeze or turn off layers.
View 4 Replies View RelatedIf you have had the issue with blue plotting purple with HP printers I discovered that its with the quality you set your printer at. If you plot draft or preview your blue will plot purple or a shade of purple. When I switched the quality to normal it fixed the issue. I called HP about the issue before I discovered this and they said update your drivers which mine were already.
View 1 Replies View RelatedI have an office with 3 network printers and 18 computers with Windows XP and AutoCAD + Revit 2010 installed. I never had issues related to printers I couldn't solve myself, but this time one of the machines decided not to allow me to use a specific printer (HP Designjet 70). When I select it, it quickly change the selected printer to "None". Its the only computer in the office with the issue, and I can't find out why. I already reinstalled the printer in many ways, even using other sharing paths, its useless. I imported AutoCAD settings from other machines, no use. Cleaned print spooler folder, reseted many settings to default, set it to off-line then on-line again, deleted useless PC3 files and everything that occurred to me, but still nothing changed it. The AutoCAD doesnt emmit errors, nothing, just refuse to accept the printer.
View 6 Replies View RelatedMy office is running into a printing issue, when different people are plotting off the same drawing file.
I've checked the .CTB file, all of us are using the same file, all .CTB parameters are identical, and no line weights have been set up within the layers, all are set to default, and no transparency has been used.
One man prints the file from AutoCAD2013, on a Windows 7-32bit computer, to our HP Laser Jet 8150N and his drawing comes out light.
I print the same drawing file from AutoCAD2012, on a Windows 7-32bit computer to the same printer with the same .CTB file and my drawing file prints dark. Much darker than his does.
We're having the same issue with other computers here in the office all printing to the same printer using exactly the same .CTB file. I've checked all the versions of Windows, and we're all using Windows 7 32-bit.
The only thing I can think of is that maybe we have different graphics cards as the computers have been purchased at different times.
I have one user that when trying to print to a color laser jet printer it only comes out in color. I even set the Plot style to monochrome.stb, (which is a network file that others use without issue) have Plot with plot styles checked, and even tried checking the black and white only in the printer properties. This is Autocad 2012.
Is there something I am missing to have the print out come out in black and white? Te print preview shows it in color.
Forgot to mention, if another user opens the drawing, it prints in black and white ok.
I need to print the drawing to PDF ISO A0 size but the output always in Portrait.how to change the black layout from Portrait to Landscape?
View 5 Replies View RelatedI'm currently using AutoCad Electrical 2010 and we just got a new printer. Is there any way to map all of my electrical drawngs to that printer without opening each drawing and selecting the new printer?
View 7 Replies View RelatedI have a CAD file that will not let me delete layers, get the usual message; "The selected layer was not deleted . . . . ". This is not the current layer, nor is it 0 or Defpoints and I am fairly certain the Layer does not contain objects. As an interesting side note; when running Purge, the Purge zero-length geometry and empty text objects is grayed out. It's not an option.
View 9 Replies View Relatedi am drawing a chamfered-counterbored cylinder... i meet the problem: unable to revolve the selected object ! After i convert the object i drawng to closed Polyline path with the Pedit command, it cant be revolve !
View 1 Replies View RelatedI've been following the Convert 2D to 3D video that is given in the Help section of AutoCAD 2012, and whenever I try to sweep the handle using the same methods that were used in the video it says that it is unable to sweep 1 selected object (when I select the path). I've attached the DWG file.
Also, when I went to use the 3D align feature I did exactly as the video did, but my handle wouldn't align with the side of the mug. It kept lining up with the side but never between the top and bottom of the mug like you'd expect. I kept having to move it to get it down where it needed to be.
I have some lines/plines..Pedit - J, then select my line and once I select the second one the first (last) selection is deselected. I cannot find the answer to this myself on google on here, i'm starting to get paranoid at my in ability to recall any of my AutoCAD working memory.
View 5 Replies View RelatedI 'm in the middle of our annual Autodesk software upgrades to the 2010 releases. One of my power users is having a problem with Inventor locking up everytime he selects the Annotation Ribbon Panel with an IDW open. I was able to reproduce this problem on the same workstation under my admin account. I tried to repair the installation and that did not work.
His workstation specs are:
Precision T5400 - Xeon Quad Core - 2.66 Ghz
4 Gb RAM
256 Mb Nvidia Quadro FX 570 (Driver 6.14.11.8246)
3D Connexion SpaceNavigator (Version 3.8.1)
Windows XP SP3 (32-bit)
in the old autocad that i had for PC there was a command to re-select all selected items by typing P and then enter. I now have 2011 autocad for mac and can not figure out how to do the same thing.
View 3 Replies View RelatedWhat is the variable that controls the order in which objects are selected? In other words, I want to be able to always select the last object created by default when objects are overlapping without using object cycling.
View 5 Replies View RelatedWhenever I select a block or polyline in 2012, the program hangs for about 1 minute. This never happens when using 2010 on the same system. Obviously this can't continue.
View 3 Replies View RelatedI am getting error 'No industry model feature has been selected' while trying to see the attribute of feature.
The below are steps followed
1. I have created materlized view
2. And created view
3. created view feature class
4. Opened the project in Map3D
5. generated the graphics
6. Selected the feature
7. click on Attribute information button.
8. Getting message "No industry model feature has been selected".
i just installed the 2012 autocad on my laptop and everytime i use trim or rotate or anything else the screen just goes black and the computer freezes for a few seconds and then it comes back and tell me that its trying to adjust the program with the monitor but it never ends and it keeps doing the same thing. btw my laptop specs are: windows7 home premium, intel i5, 6gb ddr3, intel HD3000 graphics.
View 3 Replies View RelatedWhen I grip-select an image, or pick it at the "select objects" prompt, the image hides all other geometry behind it. Troublesome when trying to fine-tune the image(png background) location relative to other entities.
Image transparency on, draworder back, monochrome, image @ 0'-0"Z.
Image looks fine until I pick it.
Simple toggle in 2011?
Acacd 2011, Win7 64
I set a snap for ease of use, e.g. if my intended output scale is 1:50 I will set my snap to 25, this makes drawing lines fast and simple.
When I used the break command in previous versions (I skipped 2011) the break would keep the snap on so I could break either side of a line with a perfect unit gap.
In 2012 when I select the first point it disregards the snap and just puts the break wherever I select on the line meaning the gap is not neat. Is there anyway to put this back the way it was?
how to change the printer associated with PSP or add another printer? I have 2 printers installed on Windows7 but the only one I get when I try to print from PSP is the wide format printer & no option to add another. Is printing from Windows Photo Viewer my only option?
View 6 Replies View RelatedI have the student version of AutoCAD 2012 on an HP laptop with Windows 7 Home Premium OS. I originally installed AutoCAD in June of 2012. It worked fine for 9 or 10 months but now whenever I select File/Open, File/Save, or File/Save As, AutoCAD stops responding and the spinning blue donut appears. AutoCAD never comes back and I have to close it from Task Manager. I uninstalled AutoCAD and reinstalled it, and the process went smoothly. However I still have exactly the same problem with the File operations. I apply Windows updates, but other than that have not made any changes to the software on the laptop. AutoCAD works fine for everything except the File operations. I am able to save with CTL/S and am able to open AutoCAD files from File Manager.
View 3 Replies View RelatedI have a user in my group that is hesitant to upgrade to 2012 because , he has many lisp routines that are associated with the PREVIOUS selection feature. This selection is very useful in that when you are moving or selecting many objects you can enter P for previous and the object will be selected.
In 2009, when you select objects then hit escape, then try to execute a command requesting to use the Previous, AutoCAD will remember the last selected object and then highlight it.
In 2012, when you select objects then hit escape, then try to execute a command using P for previous, it will not highlight the previous object selected but will highlight the previous object where a command was executed on.
Hope I haven't lost you. It seems there should be a setting under SELECTION of how to manipulate the Previous selection feature.
When i click on the green line has you can see on the image. The layer toolbar wont show me the right layer, like if it's not working. But i can see the right layer inside propreties.
Is there a system variable to ajust to see my layers inside the Layer tool bar?
I have recently upgraded from AutoCAD 2008 to 2001. Now when opening a file from windows explorer (desktop vs the AutoCAD browser) and AutoCAD is not running. AutoCAD will startup and open a new drawing as well as bring up the dialog box for finding a file to open, which I cancel, THEN open the drawing that I have selected. I have not seen this before and am wondering what variable or option is causing to happen. I am also seeing two icons for the same drawing file in the Windows task bar.
View 2 Replies View RelatedI've encountered a strange issue in PSDs I've inherited from another designer.
When I have a text layer selected with the type tool active, the font size reads correctly (say, 40px). When I actually select the text with the type tool, the font size gives a strange number (say, 38.74px).
See the screenshots below:
This is on OSX 10.8.3, Photoshop CS6.
On LR 4 and now 5, the shades of grey used to distinguish the selected vs, not selected images in the filmstrip at the bottom of the workspace are too close together making it difficult to see what has been selected. Is there someway to control the color and/or the shade of grey used for each to make it easier to tell at a glance which image(s) is currently selected?
View 1 Replies View RelatedI have windows 7 and 2006 LT but my printer does not appear in the printer list in autocad.
View 3 Replies View RelatedI need to save files as AO 1:25 pdfs to send to clients for printing. I have it all set up but as I have no plotter it wont let me save / export it!
On other threads it suggested selecting plotter "none " but that is not an option given to me , it only comes up with the home printers I have used ( they only doA4)
the procedure for adding a new printer to my Autocad 2000, or 2007.
View 5 Replies View Related