AutoCAD Inventor :: Pro 2010 Locks Up With Annotation Ribbon Tab Is Selected?
Nov 24, 2009
I 'm in the middle of our annual Autodesk software upgrades to the 2010 releases. One of my power users is having a problem with Inventor locking up everytime he selects the Annotation Ribbon Panel with an IDW open. I was able to reproduce this problem on the same workstation under my admin account. I tried to repair the installation and that did not work.
His workstation specs are:
Precision T5400 - Xeon Quad Core - 2.66 Ghz
4 Gb RAM
256 Mb Nvidia Quadro FX 570 (Driver 6.14.11.8246)
3D Connexion SpaceNavigator (Version 3.8.1)
Windows XP SP3 (32-bit)
View 9 Replies
ADVERTISEMENT
Mar 14, 2013
How to add a particular annotation for multiple selected multiline texts,In the attached screenshots, all Mtext were selected but couldn’t figure out how to add a particular annotation scale to them!
For example, I wanted all the selected mtext to have the 1:100 as annotation scale but sounds not to work with me.
View 2 Replies
View Related
Aug 6, 2011
I just installed 2012 with the Inventor pro suite. when I tried to open multiple dwg's it locked up on certain dwg's and I got the error " no cavas click on new canvas". I read an existing post that said
"I went into the CUI, current workspace, removed the Sketchbook Designer from showing in the Ribbon"
I could not find this in my cui current workspace and is this the best solution?
win 7 64 bit sp1
cpu intel xeon E5-2687W0@3.106
eight core
two solid state hard drives
32 gig of ram
Autodesk product design
suite premuim 2014 64bit
Nvida quadro 4000
Space Pilot ver. 1.6.2 2010
View 9 Replies
View Related
Mar 21, 2012
Where i could find those ribbon icons in max, for example am adding the export selected command which has an icon when you do file export, but when i add it to the ribbon it says missing icon, and i only have a modeling folder and object paint folder with icons.
View 1 Replies
View Related
Apr 22, 2012
How to make dimension annotation automatic..? cause I have ever watching in youtube...on autocad 2011...
View 1 Replies
View Related
Jan 3, 2013
is it possible to remove the annotation from a block with attributes. Make it non annotative?
View 9 Replies
View Related
May 15, 2012
When you have an annotative object set for a number of different scales, is there a way to turn off the shadow when you mouse over it showing a shadow view of the different scales?
View 3 Replies
View Related
Jan 9, 2013
I have drawings with annotation and when I send to the plotter the processing is very slow, and take some time to plot.
View 1 Replies
View Related
May 19, 2012
i have an elevation point layer that i'm using in a project and i needed to import it to arcgis for some interpolation.
Problem is, all altimetric points are "B"s instead of being points, and arcgis doesn't recognize them as points. Is there a way of quickly converting them all of them into points?
Take into consideration that we're talking about hundreds, maybe thousands of said "B"s.
View 6 Replies
View Related
Feb 13, 2012
We are using in the office annotative blocks with text attributes.
When changing the display annotation scale, the attributes go normally, at the beginning, all back to 0,0,0 point; what we solve by using ATTSYNC command, and works fine; they go back to correct size and location.
But, for some reason in some computers, when closing and saving the file, and opening it again next day, all the attributes, at the same display scale than the day before, are all wrong size and location.
I have tried to uninstall the whole program and install it again from zero, and the same problem persists.What can I do?
View 2 Replies
View Related
Jul 9, 2012
I have been trying to export my annotation settings using the profile function on Autocad 2010. I can't get it to work, and I don't think this is the best way to achieve my goal. I've made a template file, but I don't know how to import it.
My goal is to, as quickly as possible, give 8 drawings the same annotation settings.
View 5 Replies
View Related
Mar 1, 2012
The “annotation visibility” is turned on, nevertheless, some objects (texts) are hidden!
I’m not sure why some annotative objects (texts) are turned off knowing that the
All layers are turned on;The “annotation visibility” is turned on.
Screenshot below and the attached file.
Software: AutoCAD 2014, AutoCAD C3D, AutoCAD M3D, Revit
Windows 7 (Ultimate 64 bits),
Firefox 20.0,
Kaspersky 2013.
View 7 Replies
View Related
Oct 23, 2010
When I change the annotation scale for selected text and leaders, most of it shoots into space. I have tried one at a time and many, all with the same result.
The text size looks correct, the leader looks fine, but the text x coordinate changes radically.
Changing from 1:1 to 1:15,000
Does this mean I have to relocate every leader text back to something normal, or am I missing something.
View 3 Replies
View Related
Dec 6, 2011
I'm more or less happy with annotation scaling, apart from the mysterious hatching problems that are not the issue of this message.
But there is a major annotative scaling issue with batting / insulation lines. Insulation lines should NOT change with annotative scaling ! A 4" insulation layer shouldn't become 16" just because i'm printing in bigger scale !
View 9 Replies
View Related
May 23, 2012
At least once a day, upon starting up Inventor 2013, it locks up at the introduction display(with the progress bar). I just installed Inventor 2013. Inventor 2012 did not do this.
View 4 Replies
View Related
Apr 30, 2013
I have determined that an AutoCAD drawing has the unfortunate ability to have Annotation Scales "hard coded", meaning they CANNOT be removed from the drawing.
Let me explain....
In a detail drawing file (i.e. my master drawing file where I keep all of our standard details), I was getting duplicate Annotation Scales. I would try to use the SCALELISTEDIT command to try and delete the anno scales not being used, but it would appear they WERE being used. (and resetting the anno scales didn't work either)
I was using a combination of tricks to determine WHICH annotation objects were using the duplicate anno scales. I would set ANNOALLVISIBLE to 0 and set the CANNOSCALE to the duplicate anno style to see where they were being used with no luck
I would then use the QSELECT command to group select each type of annotation object that were annotative, and check to see if they were using the duplicate scales. Again, no luck
THEN, I decided to cut-n-paste each detail one-at-a-time from my master drawing file to a new BLANK drawing with only one annotation scale in it (i.e. 1:1). I would paste a detail, and then enter the SCALELISTEDIT command to see which anno scales "came along for the ride". I pasted a particular detail that carried over the duplicate anno scales, but when I checked all of the annotation objects for the duplicate anno scales - NOTHING! I then deleted that particular detail, purged it, and then I was able to delete the duplicate anno scales. But no matter what I did to try and fix that detail (i.e. wblock, cut-n-paste, save-down, etc) the duplicate anno scales simply will NOT be allowed to be deleted even though i cannot find any objects associated with them.
View 8 Replies
View Related
Jun 11, 2013
I have to annotate a lot of pipes and valves with the correct line numbers. Each line/valve got its own layer name equal to the line number.
Any annotation tool that can annotate such lines by clicking on the line and then get the layer name automatic in the end of a leader,?
View 1 Replies
View Related
Sep 25, 2013
I am running Inventor 2013 with vault 2013 on a brand new system. Everything was working great for a week or so, then inventor started to lock up during checkin. It would lock up with even a small simple part. I had the IT department try to remote in and change settings, with not luck. Then they "rebuilt" the system over again, this got things working for about another week and after that the problem started up again.
View 1 Replies
View Related
Nov 18, 2013
I have an assembly I've been working on for a while. It was fine until after opening it one day, any changes I make cause inventor to freeze up for several minutes before completing whatever it is that I was trying to accomplish. Most of the changes are with constraints (adding parts and constraining them or changing constraints that were already in place), but I even tried to just rotate a part and Inventor locked up. I'll get the green loading bar at the bottom right corner, and it will run through a couple of times before it stops. The freezing seems to be tied to this assembly only, but I'm trying to find any other way to fix the problem before having to completely restart the assembly. I've worked with bigger assemblies before and have never run into this problem.
View 9 Replies
View Related
Jun 15, 2012
How the actual file location of a drawing can be shown on the ribbon insert of just the file names. For example, file name BOM.dwg is located in C:custom---. Currently, the tool bar is showing AutoCAD BOM. dwg but I want it to show AutoCAD C:custom---.
View 2 Replies
View Related
Apr 11, 2012
I don't use MLINE much (and thought the command was DLINE) and wanted to draw 2 parallel lines. I found I could type MLINE and do what I want.
I'm trying to get used to the Ribbon and wanted to find it there, but after several minutes wasted looking all over the Ribbon, I never found it. The Help showed the ICON of 2 parallel diagonal lines but I can't find it anywhere.
View 3 Replies
View Related
Oct 12, 2012
Everytime I try to attach a Hyperlink to a dwg via the ribbon Hyperlink button I receive a FATAL ERROR: Unhandled Access Violation Reading 0x0000 Exception at e1e7b028h.
View 1 Replies
View Related
Apr 12, 2013
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
In 2012 Autocad, cannot change from model space to paper space, or paper space to model space without locking up in several drawings.
I can log into another user's computer and open the file fine. But when i use my computer or a brand new computer fitting all Auto CAD specs, it locks up. When I plot I have to reset my settings to the PTE standards every time.
I now get CAD errors when CAD is not even open. Also VTPSUHM barely works. I generally have to restart my computer several times to get it to work.
View 9 Replies
View Related
Aug 27, 2009
I've been trying to incorporate my menus and toolbars into the ribbon environment. I skipped acad 09 so this hasn't been fun. I used the transfer feature in the cui environment to get everything I wanted. I go to 2d environment to check that everything is there and it appears to be there. I load my cui and I get my icons and menus but no ribbon. I have a big message that says, "The Ribbon does not have any tabs or panels currently loaded." I type ribbon to load, but nothing.
I've now messed with this enough that even with the base acad.cuix file I still don't have the ribbons.
View 9 Replies
View Related
Jul 12, 2012
How do I add the ribbon to 2010? I just have pull downs and tool bars.
View 4 Replies
View Related
Jul 3, 2012
I used to have my ribbon and commandline next to each other but now whenever I try and put them back next to each other it always ends up with one on top or one on the bottom. I added a picture to try and explain this!
View 1 Replies
View Related
Jul 17, 2013
I rearranged the order of the panels of the "Home" tab to suit the way I like them to be. When i come in for work and open AutoCAD for the first time, or even if I need to shut it down and open it back up, not only does AutoCAD not start in my profile, but when I do set my profile to current, all of the panels rearrange themselves into default location. I even went into the 'Tools> Customize> Interface' menu to change the order the panels are set in there, but it still doesn't work. Everyday, I need to manually change their locations.
View 4 Replies
View Related
Apr 11, 2012
I have a lot of tools with separate installers. But the ribbon- panels merge in one ribbon-tab.
View 4 Replies
View Related
Nov 9, 2012
OK, something I did completely displaced my ribbon from the default horizontal location to either a floating or dockable vertical layout. It's probably staring me right in the face but how can I change it back?
View 2 Replies
View Related
Oct 10, 2012
I work at a place where we use autocad, everywhere... And I'm in IT and i've been struggling with this for a day now. I got 2009/2011 to work, but when i try to get 2010 to work, it just doesnt want to cooperate. Now when i used to start it up a proxy graphics thing would pop up, and i figured out how to turn that off, but then no ribbon loads.
So i go to the command line and type in ribbon, and i get an error:
"Unhandled exception has occurred in a component, in your application. if you continue, the app will ignore this error and attempt to continue. Object reference not set to an instance of an object" and here are the details..See the end of this message for details on invoking just-in-time (JIT) debugging instead of this dialog box.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.LoadRibbon()
at Autodesk.AutoCAD.Ribbon.RibbonPaletteSet.Initialize()
at Autodesk.AutoCAD.Ribbon.RibbonServices.CreateRibbonPaletteSet()
at Autodesk.AutoCAD.Ribbon.Commands.Ribbon()
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorker(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.InvokeWorkerWithExceptionFilter(MethodInfo mi, Object commandObject, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.Invoke(MethodInfo mi, Boolean bLispFunction)
at Autodesk.AutoCAD.Runtime.CommandClass.CommandThunk.Invoke()
[code]...
When JIT debugging is enabled, any unhandled exception will be sent to the JIT debugger registered on the computer rather than be handled by this dialog box.
View 2 Replies
View Related
Mar 19, 2013
Is there a way to Put / Tranfer Pull Down menus on the Ribbon?
Am I overlooking something simple?
AutoCAD 2012 / Inventor 2012
View 6 Replies
View Related
