I have some lines/plines..Pedit - J, then select my line and once I select the second one the first (last) selection is deselected. I cannot find the answer to this myself on google on here, i'm starting to get paranoid at my in ability to recall any of my AutoCAD working memory.
View 5 Replieshow a drawing was exported from another program. My problem is: the PEDIT command won't give me the option to convert a line "I" add to a pline.
PEDITACCEPT: 0 or 1, problem remains
It is a drawing from an house designer, I am adding structural members and notes over the drawing. I could xref, but I need to move/erase some of their notes as well. It becomes cumbersome to switch to the source dwg, edit & save, move to current dwg and refresh, to have the note where needed.
This is a pretty strange to me drawing file. It seems that a bunch of system variables are altered and hopefully it doesn't migrate over to files originating from my machine.
I want to join a couple of lines with arcs. Unfortunately I have got a dxf created with CATIA. When I try to join them with pedit it does not work.
If I move the end point of the circle away and snap it back to the line, I can join them. Blending the Curves together is working (this shouldn't if the endpoints match, right?)
You can see it in this screenshot:
(On the left the circle and line are joined after I snapped them together, on the right they are connected using "Blend Curves" as you notice the tiny white connection)
So here it leads to my question:
Those lines seem not to be lying end to end together so I can join them. Is there a function to snap them together or to automatically ignore/fill such a little gap?
i'm use to using the shift key to deselect something. it doesn't seem to be working when i select a whole bunch of lines
View 3 Replies View RelatedI have a .DWF underlay that I am tracing over an aerial. I need to create hatches for several areas, and tried to PEDIT the lines and arcs into a polyline. Several segments, however, were not "connected" to the adjacent segments even though I'd meticulously snapped to endpoints to draw the lines.
Is there a command or LISP routine to check for connectivity before I attempt PEDIT so I can fix the gaps first?
In 2007, I was able to select multiple polylines before typeing in PEDIT. When I was done with the command, I could then type in PEDIT and L for last and it would select the multiple polylines I had first selected. We just got 2012, and when I do L now it just selects one line. Can I change this?
View 7 Replies View RelatedBeing new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies View RelatedFrom a book, there is a shape shown as below. autocad_problem.jpg
It is shown for showing how to use "pedit" but not mention how to draw it. It should be drawn using polyline command.
Is there any easy method to draw it accurately.
The inner shape is at center position of outer shape.
The inner shape should be draw using "rectangle" > "chamber" command. However, don't know how much to chamber. There should be a easy way to do it instead of any calculation.
I have autocad 2012 LT.
My colleague has made xrefs for the first time. She can edit them - no problems. When I try and select a line the whole plan is selected with blue squares, then crashes. Its like it is locked. I have tried:
* updating all service packs
* edit in place
I do not know how to edit anything in the xref file.
We are creating a new company title block for the use in Inventor 2010 and AutoCAd 2010. It has initially been generated in Inventor and exported to AutoCAD. My problem is that all attributes that came over are now setup as multiline attributes and I can't seem to change them to single line. Therefore you have to open the multiline editor separately for every single item to make changes in lieu of just 'tabbing' through the values in the Enhanced Attribute Editor. This adds time and frustration and seems to be intolerable for some of my colleagues.
Is there a way to change the attributes to a single line in AutoCAD I'm just not aware of? I tried to find different settings for the export from Inventor but the options seem to be very limited.
I could probably go over this and create separate AutoCad only titleblock and border but that would kind of defeat the purpose.
I created some new custom line types using express tool featute in autocad and I saved it with a .lin extension. It is only available in that drawing itself. How I canget those line type in all my new drawings.
I tired to edit the default linetype file even it doesnot appear in the linetype manger windo.
*IRRIGATION,IRRIGATION LINE
A,1,-.066042,["IRR",Standard,y=-.104589,s=.25],-.493243,1
*SEWARAGE,SEWARAGE LINE
A,1,-.031293,["SEW",Standard,y=-.104589,s=.25],-.651197,1
I am joining plines on the same layer, etc. I was taught to use PEDIT-Join but noticed that I can do the same function with just the JOIN command. Is there any difference? Is one better/safer to use?
View 7 Replies View RelatedWhile i am using PEDIT command, I could not select all lines or arc? Is it possible to change all entities at one time using of PEDIT?
View 7 Replies View RelatedWhen I set a layer as current, every object or line I select in the drawing appear to be on that layer in the toolbar. Although in the properties toolbox, I see that the line I selected is still on the right layer.
I can't work in paperspace either, when I freeze a layer it freezes all objects. It seems like whenever I give a different layer to an object, it attributes to all object that same layer.
When I open the same drawing in acad 2008, everything is ok, the objects have the proper layers.
Is there a command for that or it's an acad 2013 problem?
I have done a drawing, and when I try to plot..The printer dialog doesn´t accept any of my installed printers.I have, for example an HP p1102, and when I select it as the printer device, de combo box closes and the selection is automatically changed to "none".
I have searched this issue in the Group, but I haven't seen any post talking about it.
I'd like to know how can i join these objects. I'm trying to use PEDIT command but no success. The objects are not touching so it's not possible?
How can i join two objects that aren't touching each other
OBJECTS.jpg
when ever I enter pedit command, and I move into model space to select polylines to join, my curser/pointer disappears? I can not select any lines because I no longer have the little square box to select lines showing. I have nothing at all. When I move out of model space, my white select arrow reappears?
View 9 Replies View RelatedI have a CAD file that will not let me delete layers, get the usual message; "The selected layer was not deleted . . . . ". This is not the current layer, nor is it 0 or Defpoints and I am fairly certain the Layer does not contain objects. As an interesting side note; when running Purge, the Purge zero-length geometry and empty text objects is grayed out. It's not an option.
View 9 Replies View RelatedI'm trying to extrude a circle around a path in all dimensions, so I drew my path in lines, filleted the corners then tried to join using the PEDIT - Join command.
Firstly, the join says something like "2 segments added to 2 polylines" when really all I want is 1 polyline.
Second, when I try to insert my circle for extrusion I OSNAP to the end of the line, then when I specify the radius it draws in the wrong plane. So far the only way I have gotten around it is rotating the ucs. Is there an easy way to do this? my Dynamic UCS is on.
We just installed AutoCAD P&ID 2013 and there is a HUGE problem with deselecting. This problem is not just on one computer, it is a systemic issue in P&ID 2013.
View 5 Replies View RelatedI am having an issue that appeared this morning when I woke up and turned my computer on... My AutoCAD 2012 (full) is locking up on certain things:
-When I select something without a command on (free selecting) it selects the items fine, but when I press the ESCAPE button to deselect everything there is a 1-2 second pause and then it deselects everything, instead of it instantly happening as it did for the past, oh I dunno, 10 years.
-If I select the items then type the command, normally it would instantly start that command with the items I had selected. Now, after selection items, when I type the command, it pauses for 1-2 seconds and the runs the command as usual.
-I am trying to edit an AutoCAD table, normally this is as smooth as butter. Now, not only are the same issues mentioned above happening, when I go to edit a cell, the typing has a 1-2 second delay and then starts. Once I start editing one box, it will move to the next cell smoothly. But if I click outside the box to end editing, there is a 1-2 second pause.
Last night, I randomly thought, "Oh, I'll run my McAfee virus scan because I haven't for a long time", literally I don't remember the last time I ran that. I also thought, "Oh, I might as well run the Dell PC Checkup scan", this is a factory program that came on the computer that again, I can not remember the lst time this was ran. Both scans went through Full Scans and found ZERO issues. The PC Checkup found one issue on an external hard drive that I use for BACK UP ONLY, I was not concerned with this because I figured it was either just an issue in the connection or between the 2 softwares. Also I wasn't concerned with it because if it does fail, it's a backup drive only anyway, so I'd just replace it.
Multiple objects are selected, I hold shif and cross-window over objects from right to left, I expect everything I cross to be deselceted. I my testing only one item is deselected.
Is there a variable I am forgetting about here or is something a miss?
i am drawing a chamfered-counterbored cylinder... i meet the problem: unable to revolve the selected object ! After i convert the object i drawng to closed Polyline path with the Pedit command, it cant be revolve !
View 1 Replies View RelatedI've been following the Convert 2D to 3D video that is given in the Help section of AutoCAD 2012, and whenever I try to sweep the handle using the same methods that were used in the video it says that it is unable to sweep 1 selected object (when I select the path). I've attached the DWG file.
Also, when I went to use the 3D align feature I did exactly as the video did, but my handle wouldn't align with the side of the mug. It kept lining up with the side but never between the top and bottom of the mug like you'd expect. I kept having to move it to get it down where it needed to be.
I 'm in the middle of our annual Autodesk software upgrades to the 2010 releases. One of my power users is having a problem with Inventor locking up everytime he selects the Annotation Ribbon Panel with an IDW open. I was able to reproduce this problem on the same workstation under my admin account. I tried to repair the installation and that did not work.
His workstation specs are:
Precision T5400 - Xeon Quad Core - 2.66 Ghz
4 Gb RAM
256 Mb Nvidia Quadro FX 570 (Driver 6.14.11.8246)
3D Connexion SpaceNavigator (Version 3.8.1)
Windows XP SP3 (32-bit)
in the old autocad that i had for PC there was a command to re-select all selected items by typing P and then enter. I now have 2011 autocad for mac and can not figure out how to do the same thing.
View 3 Replies View RelatedWhat is the variable that controls the order in which objects are selected? In other words, I want to be able to always select the last object created by default when objects are overlapping without using object cycling.
View 5 Replies View RelatedWhenever I select a block or polyline in 2012, the program hangs for about 1 minute. This never happens when using 2010 on the same system. Obviously this can't continue.
View 3 Replies View RelatedI am getting error 'No industry model feature has been selected' while trying to see the attribute of feature.
The below are steps followed
1. I have created materlized view
2. And created view
3. created view feature class
4. Opened the project in Map3D
5. generated the graphics
6. Selected the feature
7. click on Attribute information button.
8. Getting message "No industry model feature has been selected".
i just installed the 2012 autocad on my laptop and everytime i use trim or rotate or anything else the screen just goes black and the computer freezes for a few seconds and then it comes back and tell me that its trying to adjust the program with the monitor but it never ends and it keeps doing the same thing. btw my laptop specs are: windows7 home premium, intel i5, 6gb ddr3, intel HD3000 graphics.
View 3 Replies View RelatedWhen I grip-select an image, or pick it at the "select objects" prompt, the image hides all other geometry behind it. Troublesome when trying to fine-tune the image(png background) location relative to other entities.
Image transparency on, draworder back, monochrome, image @ 0'-0"Z.
Image looks fine until I pick it.
Simple toggle in 2011?
Acacd 2011, Win7 64