AutoCad :: How To Change All Entities At One Time Using PEDIT
Oct 25, 2011While i am using PEDIT command, I could not select all lines or arc? Is it possible to change all entities at one time using of PEDIT?
View 7 Replies
ADVERTISEMENT
AutoCAD 2010 :: Change Multiple Entities Of Mtext?
Sep 26, 2012I was wondering if there is a way to change multiple entities of Mtext. I tried CHT but the options are limited. Is there a way of say changing the color?
View 6 Replies View RelatedLightroom :: How To Change Capture Time Of Multiple Photos To Specific Time
Feb 2, 2014I'm trying to change "capture time" of multiple photos to a specific time.
I know that there is "Edit Capture Time" feature under Metadata. But when I try to edit multiple photos, it says that "Modify the capture time stored in the selected photos by entering the correct time adjustment for the photo displayed to the left. Other photos (but not vidieos) will be adjusted by the same amount of time". And it really does.
For example,
If A file's capture time is 1/11/2011
B file's capture time is 1/11/2012
C file's capture time is 1/11/2013
I would like to change their capture time to 1/11/2014. All the three files.
But the current "Edit Capture Time" feature of Lightroom just adds three years to each file like this:
A file's capture time -> 1/11/2014
B file -> 1/11/2015
C file -> 1/11/2016
So their capture times remain as different ones. And this is not I want...
I've googled a lot and tried several programs other than lightroom as well, but the "Capture time" recognized by lightroom could not be changed by other programs.
AutoCad 2D :: How To Use Pedit
Oct 27, 2011From a book, there is a shape shown as below. autocad_problem.jpg
It is shown for showing how to use "pedit" but not mention how to draw it. It should be drawn using polyline command.
Is there any easy method to draw it accurately.
The inner shape is at center position of outer shape.
The inner shape should be draw using "rectangle" > "chamber" command. However, don't know how much to chamber. There should be a easy way to do it instead of any calculation.
AutoCAD Civil 3D :: Difference Between Pedit And Join
Jan 5, 2014I am joining plines on the same layer, etc. I was taught to use PEDIT-Join but noticed that I can do the same function with just the JOIN command. Is there any difference? Is one better/safer to use?
View 7 Replies View RelatedAutoCAD LT :: PEDIT Won't Convert From Line To Polyline
Feb 20, 2013how a drawing was exported from another program. My problem is: the PEDIT command won't give me the option to convert a line "I" add to a pline.
PEDITACCEPT: 0 or 1, problem remains
It is a drawing from an house designer, I am adding structural members and notes over the drawing. I could xref, but I need to move/erase some of their notes as well. It becomes cumbersome to switch to the source dwg, edit & save, move to current dwg and refresh, to have the note where needed.
This is a pretty strange to me drawing file. It seems that a bunch of system variables are altered and hopefully it doesn't migrate over to files originating from my machine.
AutoCAD 2010 :: Pedit - Deselecting Last Line Selected
Mar 6, 2013I have some lines/plines..Pedit - J, then select my line and once I select the second one the first (last) selection is deselected. I cannot find the answer to this myself on google on here, i'm starting to get paranoid at my in ability to recall any of my AutoCAD working memory.
View 5 Replies View RelatedAutoCad 2D :: Joining Line And Arc With PEdit Not Working Because Of Gap - Snap Together?
Apr 18, 2012I want to join a couple of lines with arcs. Unfortunately I have got a dxf created with CATIA. When I try to join them with pedit it does not work.
If I move the end point of the circle away and snap it back to the line, I can join them. Blending the Curves together is working (this shouldn't if the endpoints match, right?)
You can see it in this screenshot:
(On the left the circle and line are joined after I snapped them together, on the right they are connected using "Blend Curves" as you notice the tiny white connection)
So here it leads to my question:
Those lines seem not to be lying end to end together so I can join them. Is there a function to snap them together or to automatically ignore/fill such a little gap?
AutoCad :: Join Objects Using PEDIT Command But No Success
Aug 15, 2012I'd like to know how can i join these objects. I'm trying to use PEDIT command but no success. The objects are not touching so it's not possible?
How can i join two objects that aren't touching each other
OBJECTS.jpg
AutoCad :: Pedit Command Does Not Show Select Tool
Oct 21, 2012when ever I enter pedit command, and I move into model space to select polylines to join, my curser/pointer disappears? I can not select any lines because I no longer have the little square box to select lines showing. I have nothing at all. When I move out of model space, my white select arrow reappears?
View 9 Replies View RelatedAutoCAD 2010 :: Checking Endpoints For Connectivity Prior To PEDIT
Jul 5, 2012I have a .DWF underlay that I am tracing over an aerial. I need to create hatches for several areas, and tried to PEDIT the lines and arcs into a polyline. Several segments, however, were not "connected" to the adjacent segments even though I'd meticulously snapped to endpoints to draw the lines.
Is there a command or LISP routine to check for connectivity before I attempt PEDIT so I can fix the gaps first?
AutoCad :: Extrude A Circle Around A Path In All Dimensions - UCS And PEDIT Join
Mar 17, 2012I'm trying to extrude a circle around a path in all dimensions, so I drew my path in lines, filleted the corners then tried to join using the PEDIT - Join command.
Firstly, the join says something like "2 segments added to 2 polylines" when really all I want is 1 polyline.
Second, when I try to insert my circle for extrusion I OSNAP to the end of the line, then when I specify the radius it draws in the wrong plane. So far the only way I have gotten around it is rotating the ucs. Is there an easy way to do this? my Dynamic UCS is on.
AutoCAD 2010 :: How To Select Multiple Polylines Before Typing In PEDIT
Jun 29, 2012In 2007, I was able to select multiple polylines before typeing in PEDIT. When I was done with the command, I could then type in PEDIT and L for last and it would select the multiple polylines I had first selected. We just got 2012, and when I do L now it just selects one line. Can I change this?
View 7 Replies View RelatedAutoCAD Architecture :: How To Change Time Between Backups
Apr 12, 2010Over the past year we have had a problem arise on three projects and I can't seem to track down the cause. The first job it only happened once, the second it happened a few times and now on this third project it has happened twice in three days.
The issue is the dst file becomes corrupt and all of our sheet set info is lost. The backup of the dst file is overwritten every few minutes it seems and by the time we notice a problem, the backup has been overwritten by the corrupt file.
A few questions:
1) What is causing the problem? In reading other posts it seems to have something to do with more than one user writing to the file at the same time (but, this last time it happened, only one person in the office was working on the job).
2) Can we change the time between backups?
3) Is there an easier way to rebuild the sheet set?
AutoCAD 2013 :: Using Join Icon Versus Joining Lines In Pedit Command
Oct 6, 2013what is the difference btwn using the join icon and joining lines using the pedit command?
View 5 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Execute PEdit Command In Routine Without Echoing
Aug 20, 2007I'm trying to execute a pedit command in a lisp routine, without echoing, with no luck...
cmdecho and nomutt dont resolve my problem...
AutoCAD 2010 :: Crashes EVERY Time That Change The Color Of Something?
Oct 4, 2012I have AutoCAD Mechanical (but only use ACAD), and now every time that I try to change the color of something (line, circle, text...) my AutoCAD crashes! {This is very frustrating}
Currently the only way of changing colors is through Layers.
AutoCAD 2013 :: Change Palette Delay Time?
Jun 26, 2012How do you change the palette delay time?
View 1 Replies View RelatedAutoCad :: Change Mline Style Or Offset In Creation Time?
Jun 3, 2013I am creating walls so im using mline with mstyle. the problem is when I create the mline for different walls. for example drawing mline for a wall that is 20 units and then moving to a wall that needs to be 30.
is there any way to change the mline style or offset in creation time?
AutoCAD Visual LISP / AutoLISP :: Change Table Text In One Time
Jul 21, 2012I want to change a lot of table cell text in one time, try to explain something.
In the front of my drawings i have a view tables. in the second column stays a code that represent a location.
e.g. LVC stays for Low voltage cubicle. Now it is my intention to substitute these code to the description of code in one time and only the second column. The several descriptions are written in an .txt file, like LVC;Low voltage cubicle and on the next row LVP;Low voltage panel, and so on.
I think it is only possible with Lisp? or there are other way?
In the past i did it one by one, because mostly there where 2 or 3 tables, now i have a big project with more than 20 tables.
Revit :: Change Date And Time
Jul 23, 2013I've replaced Windows 8 and then when I enter my Autodesk360 I encounter the following warning.I changed the date and time, but this warning is displayed.
View 2 Replies View RelatedLightroom :: How To Change Capture Time
Jul 19, 2012I had wrong year setting om my camera. Now all shots are 2010 and not in 2012. I tried to change them including check the write settings into raw-files.
The creation date are still 2010 and wrong, when I look at files in the finder.
second: how to move the pictures from the wrong 2010 folder to the 2012?
VideoStudio :: X3 - Change Duration Time To All Of Photos At Once?
Nov 10, 2010I am preparing a slideshow using photos. Is there a way to change the duration time to all of the photos at once? Say to 6 sec. I can do them one by one but I have a number of photos. I am using Video Studio X3.
View 3 Replies View RelatedPhotoshop :: Using Web Gallery. How Do You Change The Slide Time?
Oct 9, 2005I am trying to use the web photo gallery with Photoshop 7. If you select the bottom option something like vertical slide gallery it will automatically change every 10 seconds. How do I change that 10 seconds to something like 4 or 5 seconds. I can't find anywhere to do this.
View 4 Replies View RelatedIllustrator :: Change All Fills Of Same Object At Same Time?
Jan 15, 2013I have an object which has multiple fills on the appearance palette. Is there a way to set all these fills to same color at the same time ?
View 3 Replies View RelatedPhotoshop Elements :: Cannot Change Date And Time
Mar 21, 2014I can not change date and time
View 2 Replies View RelatedLightroom :: Change Photo Capture Time
Jun 1, 2012Change the photo capture time
View 8 Replies View RelatedLightroom :: Edit Capture Time - Can't Change ALL
Dec 1, 2013When I select a bunch of images and try to change the capture time by an hour (Metadata/Edit Capture Time) there is no check box or button for "change all". I know I've done this in the past, but can't do it now and don't see change all. I'm using LR 5.2 and selecting the images I want to change in grid view.
View 4 Replies View RelatedVideoStudio :: Change Time Of Fade In Motion Effect
Oct 4, 2011Is it possible to change the time of the fade in/out motion effect of an overlay video? I use VS Pro X3.
View 2 Replies View RelatedPhotoshop :: How To Change Colors Of Multiple Layers At Same Time?
Aug 29, 2007I need to change the channels of about 10 layers at the same time, without loosing their colour relation to each other (so basically what you do with the image adjustments)...
But I need to limit it to a couple of layers in stead of the entire pic.. Ive tried adjustment layers, but they seem to applie to all the layers below them.. im probably applying it the wrong way right?
Revit :: Alignment Change For Two Or More Text By Selecting At A Time
Jul 19, 2012In revit can we do alignment change for two or more text by selecting at a time.
View 1 Replies View Related