AutoCad :: Deselecting Line After Selecting Bunch Of Lines?
Feb 20, 2013i'm use to using the shift key to deselect something. it doesn't seem to be working when i select a whole bunch of lines
View 3 Replies
ADVERTISEMENT
AutoCAD .NET :: Selecting Lines Around Intersection Point With Reference Line?
Sep 17, 2011Is it possible to select lines (maybe up to 6 lines) around an intersection point with a reference line. There is one intersection point and the lines are around it. And also, both the intersecting lines are in different layers.
How to get the ObjectARX's ArxDbg tool working on autocad 2012. ObjectARX 2010 sample project fails to open in VS2010 express.
Photoshop :: Selecting In CS6 Makes Screen Go Black / Deselecting Turns It Back Normal Again?
Jun 3, 2012When I try to select areas in PS CS6 my whole document turns black. As soon as I deselect it comes back in view.Is there something wrong with my setting?
View 1 Replies View RelatedAutoCAD 2010 :: Pedit - Deselecting Last Line Selected
Mar 6, 2013I have some lines/plines..Pedit - J, then select my line and once I select the second one the first (last) selection is deselected. I cannot find the answer to this myself on google on here, i'm starting to get paranoid at my in ability to recall any of my AutoCAD working memory.
View 5 Replies View RelatedAutoCad :: Bunch Of Lines Are Stacked On Top Of Each Other?
Feb 20, 2013i have a messy drawing, and i'm sure there are places where like 15 identical lines are laid one on top of the other.. is there a way to have these instances 'revealed' so i can delete the junk information?
View 3 Replies View RelatedAutoCAD Inventor :: Recreate A Bunch Of IV-Studio Settings To Match A Bunch Of Renders
Jun 12, 2012I'm trying to recreate a bunch of IV-Studio settings to match a bunch of renders made by previous staff that did not leave behind the assembly files they used to make them in the first place.
I've ran into a problem with some parts displaying incorrectly. (they display incorrectly in the render/in the studio environment/ in the assembly/ and when in the part file) I've played with material and appearance styles but they have no effect, I've also tried quality/performance/compatibility hardware modes.
We have 5 or 6 parts that share the ridge pattern that is causing problems and they are affected in the same way.I'm running XP(32), IV2012-sp2, fx1800 with 6.14.0012.6570 drivers.
Illustrator :: Preview Paths / Objects Line Without Always Deselecting?
Mar 23, 2013Being new to AI, I find that as I draw paths, sometimes I would like to view them without all the anchors and handles, etc. So far, I've been doing this by clicking the 'deselect' option. Is there a faster way to do this, some sort of shortcut perhaps?
View 1 Replies View RelatedAutoCAD LT :: Selecting (duplicate) Line Under Another Line?
Feb 17, 2011Is there an easy way to do this, tabbing doesn't do it. I've always had trouble selecting a line buried under anothe one.
View 4 Replies View RelatedAutoCAD Inventor :: Delay At Selecting Lines?
Feb 4, 2013I experience a delay when i want to select a line or curve in a scetch, part or assembly. Normally when you move the cursor over a line it highlites red within a fraction of a second. Now it takes 3 or 4 seconds to be selected.
is it a wrong setting or a bug. Never had the problem before. Not in 2012 or in 2013.
AutoCad :: Re-selecting Objects Or Lines Macro?
May 12, 2011when i am trying to use a function like mirror or offset..etc i will select the lines or objects then i will make a mistake such as selecting the wrong base point or such. i then press esc to end that function and try again but find it annoying that i have to select all the lines again. is there a quicker way to reselect the last lines or objects selected. "like the (L+enter) to use line function type macro".
View 2 Replies View RelatedAutoCAD .NET :: Get Coordinate Of X / Y / Z By Selecting A Line
Jul 3, 2012I'd like to get the coordinate of X, Y, Z by selecting a line using C#, is there any sample code or references.
View 3 Replies View RelatedAutoCad :: Selecting A Hidden Line?
Nov 11, 2012I have drawn a black horizontal line 100mm long. Under that line a have a 100mm line coloured blue. How do I select the blue line? In AutoCAD 2000 I would hold down ctrl and select the line. Then scroll using the mouse pressing right click to select. I am currently using AutoCad2011. This function does not work.
View 4 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Constructing Infinite Lines By Selecting Objects?
Aug 12, 2013Is there way that by selecting objects (Lines,Pl) it construct infinite lines ?
View 3 Replies View RelatedAutoCAD LT :: Mouse Left Click Selecting Multiple Lines / Objects Not Working
Feb 26, 2012Can not click on multiple objects or lines for erase,trim or extend commands. Is there a mode that I have turned on by accident , driver warning also comes up in trim offset command.
View 6 Replies View RelatedAutoCAD Civil 3D :: Pesky Selection Box Appears When Selecting Line?
May 11, 2011Everytime I do a command where I have to select something, such as move, copy, etc., this pesky "selection" box comes up. This started just a couple of days ago and is annoying. What setting I need to change to get the box to go away?
View 4 Replies View RelatedGIMP :: Selecting Only Pencil Lines In Scanned Drawing?
Aug 18, 2013I'm trying to select the pencil lines only from a scanned drawing and lose the white back ground so I can set the drawing only onto other layers. How would I go about doing this?
View 4 Replies View RelatedRevit :: Edge Lines Aren't Selecting In Join Roof
Nov 21, 2013Followed all the steps found online, but when I select "Join Roof", the cursor will not select any of the edge lines (tried on multiple roofs). Software Error? Revit 2014 Architecture.
View 1 Replies View RelatedAutoCAD 2013 :: Shift Drag Not Deselecting
Apr 26, 2012We just installed AutoCAD P&ID 2013 and there is a HUGE problem with deselecting. This problem is not just on one computer, it is a systemic issue in P&ID 2013.
View 5 Replies View RelatedAutoCad :: 2012 SP1 - Locking Up On Commands And Deselecting?
Dec 2, 2011I am having an issue that appeared this morning when I woke up and turned my computer on... My AutoCAD 2012 (full) is locking up on certain things:
-When I select something without a command on (free selecting) it selects the items fine, but when I press the ESCAPE button to deselect everything there is a 1-2 second pause and then it deselects everything, instead of it instantly happening as it did for the past, oh I dunno, 10 years.
-If I select the items then type the command, normally it would instantly start that command with the items I had selected. Now, after selection items, when I type the command, it pauses for 1-2 seconds and the runs the command as usual.
-I am trying to edit an AutoCAD table, normally this is as smooth as butter. Now, not only are the same issues mentioned above happening, when I go to edit a cell, the typing has a 1-2 second delay and then starts. Once I start editing one box, it will move to the next cell smoothly. But if I click outside the box to end editing, there is a 1-2 second pause.
Last night, I randomly thought, "Oh, I'll run my McAfee virus scan because I haven't for a long time", literally I don't remember the last time I ran that. I also thought, "Oh, I might as well run the Dell PC Checkup scan", this is a factory program that came on the computer that again, I can not remember the lst time this was ran. Both scans went through Full Scans and found ZERO issues. The PC Checkup found one issue on an external hard drive that I use for BACK UP ONLY, I was not concerned with this because I figured it was either just an issue in the connection or between the 2 softwares. Also I wasn't concerned with it because if it does fail, it's a backup drive only anyway, so I'd just replace it.
AutoCAD 2013 :: Shift Window Not Deselecting?
Apr 2, 2012Multiple objects are selected, I hold shif and cross-window over objects from right to left, I expect everything I cross to be deselceted. I my testing only one item is deselected.
Is there a variable I am forgetting about here or is something a miss?
GIMP :: Selecting Just Single Line For Converting Into Path
Apr 11, 2012Let's say you just have a simple black line in Gimp. You then use the color select tool to select it, and you plan on then converting that Selection into a single line Path.
From:
Into:
You select the line, but the Selection tool actually travels a loop around the line. So, when you turn that Selection into a Path, you do not have a single line, but you instead have a loop.
So my question is this: is there any mechanism for making your Selection in GIMP just a single line so that it can then be converted into a Path?
Originally, I was trying to achieve this in Inkscape (and started a thread about it in the Inkscape forum). However, it appears that, although other Vector Art programs can achieve this, Inkscape cannot. So I was thinking that I could instead use Paths in GIMP instead, but this is not possible because of the nature of Selections, as far as I can tell.
Here's an attempt to illustrate this request:
AutoCAD 2013 :: Deselecting By Shift+Click Stopped Working?
Oct 29, 2013A while ago I found out you can deselect something from your current selection set by holding down the shift key and clicking on it. This was a pretty useful tool...but then it randomly stopped working today for me.
View 4 Replies View RelatedAutoCad :: Options Window Not Display When Typing Options In Command Line Or Selecting From Drop Down
Jul 2, 2013The options window will not display when typing "options" in the command line or selecting from the drop down. The options menu has to be hidden somewhere because AutoCad will not allow any other commands after typing options until I hit escape. I have tried restarting CAD and rebooting my computer with not luck.
View 9 Replies View RelatedAutoCad :: Delay In Selecting Object And Selecting Command?
Sep 25, 2008I am having a problem with a delay in selecting an object and selecting a command.
When I select an object the pointer has at least a 3 second delay before it starts moving around normally again. It is the same with selecting a command. This has started to get tedious. It has worked fine in the past so I don't think it is a RAM/graphics card problem.
AutoCad 3D :: How To Make One Solid Line From Many Lines
Jul 21, 2011I have the following problem: I have loads of lines in 3D, some longer, some very short. With PE i can join them using fuzz, but since some lines are next to another line then it tends to make the line go back and forth in some places. What i want to do is somehow make an average line from all the other lines.
View 2 Replies View RelatedAutoCAD Visual LISP / AutoLISP :: Line Between Two Lines?
Feb 15, 2013I am trying to draw a line between two lines and I put together the following. It works great if the start/end points are perpendicular to each other. How do I solve if line one start point is in a positive direction and line two is in a negative direction?
(defun c:test ()
(setq L1 (car (entsel "
Select the first line: "))
L2 (car (entsel "
Select the second line: "))
)
[code]....
AutoCAD LT :: Unselectable Lines Appearing At The End Of Each Drawn Line
Aug 26, 2013Any one deal with lines that appear to the right of each line that is drawn? For example if I draw a vertical line I get a line at the start point and the end point that display off to the right 2 cm or so. Zoomed in or out, always about 2 cm. After about 15 minutes, every line does this. Pretty bothersome. I thought it was a graphics card but the blocks in my drawings go off to the right in which they were created. So if the block is rotated, these little 'tails' rotate with it.
I tried some troubleshooting - Reinstalling/updating graphics card driver, switching monitors, but no luck.
I have 8gb of ram on a windows 7 Bit system, and have an Autodesk/AutoCAD certified graphics card - an AMD FirePro 3900 (ATI FireGL). You'd think that this 'certification' would prevent problems like this. What do I know.
On a side note, Draw Order > send to back/send to front does not appear to work either on my display.
AutoCAD 2013 :: Display More Lines At The Command Line?
Oct 1, 2012Is there a way to display more "lines" at the command line?
View 8 Replies View RelatedAutoCad :: Drawing A Line Central To Two Parallel Lines?
Dec 14, 2011if I have two lines which run roughly paralel, but sometimes vary in the distance between them, is there a quick method of having CAD draw a line which is central to the two?
Basically, like an offset, but it would need to offset the line at a distance that is central to the two lines, as and where it varies. IE, you couldnt choose 'offset' and then choose 'mid between two points' because the distance between the lines varies at points..
AutoCad :: Breaking Multiple Lines Using Cross Line
Oct 7, 2010How do you break multiple lines along a line?
I.e. you have ten horizontal lines 3m long and one vertical line running down the center of the 3m lines. I need to break the horizontal lines in two where they touch the vertical line without having a line smaller then 1.5m.
On a single line I can do it using the F command and clicking twice on the intersection but is it possible to select multiple lines ant the same time and use the crossing line to cut along?
AutoCAD Inventor :: Mouse Selecting / Not Selecting?
May 15, 2012OK, today, or actually just this afternoon I've noticed it has become much harder to select items with the mouse.
Points, nodes, etc...anything where you'd typically hover the mouse over the item and it highlights for you to select it.
For example, lets say you want to project a point from another sketch, or select the center node of a line, etc.
Never really had an issue until this afternoon where now it seems I have to be right on top of the item and I cannot budge one bit or it won't select it. It is now taking me numerous attempts to select things like points (zooming in does not work, points scale accordingly).
Is there a setting somewhere? I can't seem to find such under Tools>Application Options and the like.